10—20MeV中子引起单粒子翻转能量沉积统计分析

基于Monte Carlo计算模拟, 对10—20MeV中子引起存储器单粒子翻转能量沉积进行了统计分析, 为了解单粒子翻转随机过程提供能量沉积统计信息.     

Neutron-induced single event upset simulation in Geant4 for three-dimensional die-stacked SRAM

Three-dimensional integrated circuits(3D ICs)have entered into the mainstream due to their high performance,high integration,and low power consumption.When used in atmospheric environments,3D ICs are irradiated inevitably by neutrons.In this paper,a 3D die-stacked SRAM device is constructed based on a real planar SRAM device.Then,the single event upsets(SEUs)caused by neutrons with different energies are studied by the Monte Carlo method.The SEU cross-sections for each die and for the whole three-layer die-stacked SRAM device is obtained for neutrons with energy ranging from 1 MeV to 1000 MeV.The results indicate that the variation trend of the SEU cross-section for every single die and for the entire die-stacked device is consistent,but the specific values are different.The SEU cross-section is shown to be dependent on the threshold of linear energy transfer(LETth)and thickness of the sensitive volume(Tsv).The secondary particle distribution and energy deposition are analyzed,and the internal mechanism that is responsible for this difference is illustrated.Besides,the ratio and patterns of multiple bit upset(MBU)caused by neutrons with different energies are also presented.This work is helpful for the aerospace IC designers to understand the SEU mechanism of 3D ICs caused by neutrons irradiation.     

静态随机存储器单粒子翻转的Monte Carlo模拟

利用蒙特卡罗(Monte Carlo)方法，对10—20MeV 中子在静态随机存储器(SRAM)中引起的单粒子翻转进行了模拟，着重对中子在SRAM 灵敏区引起的电离能量沉积进行了计算，并对中子引起单粒子翻转过程相关物理量进行了计算.这些计算模拟结果为了解10—20MeV 中子引起SRAM 单粒子翻转过程提供了详细的统计信息，为SRAM 的抗辐射加固提供相关参考信息. 关键词： SRAM单粒子翻转 Monte Carlo 模拟 能量沉积     

深亚微米SRAM质子单粒子翻转实验研究

宇航半导体器件运行在一个复杂的空间辐射环境中,质子是空间辐射环境中粒子的重要组成部分,因而质子在半导体器件中导致的辐射效应一直受到国内外的关注。利用兰州重离子加速器(Heavy Ion Research Facility In Lanzhou) 加速出的H2 分子打靶产生能量为10 MeV 的质子,研究了特征尺寸为0.5/0.35/0.15 μm体硅和绝缘体上硅(SOI) 工艺静态随机存储器(SRAM) 的质子单粒子翻转敏感性,这也是首次在该装置上开展的质子单粒子翻转实验研究。实验结果表明特征尺寸为亚微米的SOI 工艺SRAM器件对质子单粒子翻转不敏感,但随着器件特征尺寸的减小和工作电压的降低,SOI 工艺SRAM器件对质子单粒子翻转越来越敏感;特征尺寸为深亚微米的体硅工艺SRAM器件单粒子翻转截面随入射质子能量变化明显,存在发生翻转的质子能量阈值,CREME-MC模拟结果表明质子在深亚微米的体硅工艺SRAM器件中通过质子核反应导致单粒子翻转。Microelectronic devices are used in a harsh radiation environment for space missions. Among all the reliability issues concerned, proton induced single event upset (SEU) is becoming more and more noticeable for semiconductor components exposed on space. In this work, an experimental research of SEU induced by 10 MeV proton for static random access memory (SRAM) of 0.5, 0.35 and 0.15 m feature size is carried out on HeavyIon Research Facility in Lanzhou for the rst time. The experimental results show that proton induced SEUs in submicron and deep-submicron (SRAMs) are dominated by secondary ions generated by proton nuclear reaction events. The silicon-on-insulator SRAMs characters natural radiation-hardened SEU by proton. For the deep-submicron bulk-silicon technology SRAM, the proton SEU cross section is closely related to the proton energy and there is a threshold energy for the SEU occurrence by proton indirect ionization. CREME-MC simulation indicates that the SEU events in deep-submicron SRAM are induced by the proton nuclear reaction.     

高能质子引起器件单粒子效应的研究方法

简略介绍了高能质子在半导体芯片中引起单粒子效应的实验测量和理论分析方法,包括核反应分析方法、半经验方法,介绍了质子和重离子翻转截面间的关系,并用重离子实验数据预测器件在质子环境下的翻转率. This article introduces briefly the experimental and theoretical methods that have been used to study high energy proton induced single event effect in semiconductor devices. The theoretical methods including nuclear reaction analysis method and semi empirical method are presented. The relationship of upset cross section between proton and heavy ions is described. Finally, on orbit proton upset rates are predicted by using the heavy ion test data.     

Equivalent properties of single event burnout induced by different sources

The experimental results of single event burnout induced by heavy ions and 252Cf fission fragments in power MOSFET devices have been investigated. It is concluded that the characteristics of single event burnout induced by 252Cf fission fragments is consistent to that in heavy ions. The power MOSFET in the ＂turn-off＂ state is more susceptible to single event burnout than it is in the ＂turn-on＂ state. The thresholds of the drain-source voltage for single event burnout induced by 173 MeV bromine ions and ^252Cf fission fragments are close to each other, and the burnout cross section is sensitive to variation of the drain-source voltage above the threshold of single event burnout. In addition, the current waveforms of single event burnouts induced by different sources are similar. Different power MOSFET devices may have different probabilities for the occurrence of single event burnout.     

Charge collection of single event effects at Bragg's peak

Using Geant4 Monte Carlo code and Technology Computer-Aided Design(TCAD) simulation,energy deposition and charge collection of single event effects(SEE) are studied,which are induced by low-energy protons and α particles in small feature size devices.We analyzed charge collection of SEE especially at Bragg's peak and obtained two types of deposited energy distributions of protons and α particles at different incident energies.The two components of the total charge collected are quantified,which are due to d...     

Angular dependence of multiple-bit upset response in static random access memories under heavy ion irradiation

Experimental evidence is presented relevant to the angular dependences of multiple-bit upset (MBU) rates and patterns in static random access memories (SRAMs) under heavy ion irradiation. The single event upset (SEU) cross sections under tilted ion strikes are overestimated by 23.9% 84.6%, compared with under normally incident ion with the equivalent linear energy transfer (LET) value of ～ 41 MeV/(mg/cm 2 ), which can be partially explained by the fact that the MBU rate for tilted ions of 30 is 8.5%-9.8% higher than for normally incident ions. While at a lower LET of ～ 9.5 MeV/(mg/cm 2 ), no clear discrepancy is observed. Moreover, since the ion trajectories at normal and tilted incidences are different, the predominant double-bit upset (DBU) patterns measured are different in both conditions. Those differences depend on the LET values of heavy ions and devices under test. Thus, effective LET method should be used carefully in ground-based testing of single event effects (SEE) sensitivity, especially in MBU-sensitive devices.     

Monte Carlo方法在单粒子翻转数值模拟中的应用

描述了在单粒子翻转数值模拟中的一种有效方法-Monte Carlo方法,并对该方法中的粒子输运过程和相关的随机抽样进行了描述.对14MeV的中子从存储器硅片表面随机入射引起的单粒子翻转进行了计算和分析,同时计算了Monte Carlo方法引起的误差.     

First principles simulation technique for characterizing single event effects

This paper develops a new simulation technique to characterize single event effects on semiconductor devices. The technique used to calculate the single event effects is developed according to the physical interaction mechanism of a single event effect. An application of the first principles simulation technique is performed to predict the ground-test single event upset effect on field-programmable gate arrays based on 0.25 μm advanced complementary metal-oxide-semiconductor technology. The agreement between the single event upset cross section accessed from a broad-beam heavy ion experiment and simulation shows that the simulation technique could be used to characterize the single event effects induced by heavy ions on a semiconductor device.     

纳米静态随机存储器低能质子单粒子翻转敏感性研究

针对65, 90, 250 nm三种不同特征尺寸的静态随机存储器基于国内和国外质子加速器试验平台, 获取了从低能到高能完整的质子单粒子翻转截面曲线. 试验结果表明, 对于纳米器件1 MeV以下低能质子所引起的单粒子翻转截面比高能质子单粒子翻转饱和截面最高可达3个数量级. 采用基于试验数据和器件信息相结合的方法, 构建了较为精确的复合灵敏体积几何结构模型, 在此基础上采用蒙特卡罗方法揭示了低能质子穿过多层金属布线层, 由于能量岐离使展宽能谱处于布拉格峰值的附近, 通过直接电离方式将能量集中沉积在灵敏体积内, 是导致单粒子翻转截面峰值的根本原因. 并针对某一轨道环境预估了低能质子对空间质子单粒子翻转率的贡献.     

单粒子翻转脉冲激光模拟的能量阈值的计算

 根据光的吸收机理,分析了单粒子效应脉冲激光模拟实验中所需用的脉冲激光的特点,探讨了脉冲激光单粒子效应的Monte Carlo计算模拟途径。在只考虑光电效应的简化下,得到存储器硅片单粒子翻转时入射脉冲激光能量阈值与临界电荷的计算关系式,进而给出该硅片的翻转截面的计算公式。在给定了存储器硅片的临界电荷的情况下,对入射脉冲激光能量阈值和单粒子翻转截面进行了计算。     

累积辐照影响静态随机存储器单粒子翻转敏感性的仿真研究

基于解析分析对比了大尺寸与深亚微米尺度下静态随机存取存储器(static random access memory, SRAM)单元单粒子翻转敏感性的表征值及引入累积辐照后的变化趋势. 同时借助仿真模拟计算了0.18 μm工艺对应的六管SRAM单元在对应不同累积剂量情况下, 离子分别入射不同中心单管时的电学响应变化, 计算结果与解析分析所得推论相一致, 即只有当累积辐照阶段与单粒子作用阶段存储相反数值时, SRAM单元的单粒子翻转敏感性才会增强. 关键词： 累积辐照 单粒子翻转 静态随机存储器 器件仿真     

航空高度FPGA单粒子翻转飞行实验及失效分析

随着微电子工艺的发展,小尺寸、高密度及低电压的器件越来越多地应用于航空电子设备。许多科研人员发现高层大气及外太空的带电粒子带来的粒子辐射会对航空电子器件产生严重的影响。基于民用航空局方的要求,鉴于机载设备对单粒子翻转效应的隐患以及航空机载设备国产化的迫切需求,开展FPGA器件用于机载电子设备可能遭遇的单粒子翻转效应的风险问题研究。分析了主流FPGA在航空飞行高度的飞行实验数据,进一步论证其是否满足民用航空的需求。大量数据的分析结果证明,以当下主流FPGA芯片的工艺尺寸、工作电压的条件,单粒子翻转效应是一个不容忽视的问题。即便是航空飞行高度甚至是地面高度,FPGA芯片因单粒子翻转导致失效也是无法满足民用航空设备的安全性要求。     

以太网芯片重离子单粒子效应试验

为评估和研究工业以太网芯片KSZ8851-16MLLJ在空间环境中的适应性,利用重离子源对芯片进行了单粒子试验。根据以太网芯片的结构和功能制订了单粒子实验方案,得出了实验数据,并对实验数据进行了整理和研究。实验和研究表明:工业以太网芯片KSZ8851-16MLLJ具有一定的抗单粒子辐射能力;在不同网络传输条件下,发生单粒子翻转的机率也不相同;在持续的单粒子辐射下,以太网芯片会发生电流阶跃,第二次电流阶跃时产生单粒子锁定,在工程应用中可以利用电流阶跃监测芯片的辐射水平。     

静态随机存储器单粒子翻转效应三维数值模拟

针对特征尺寸为1.5 μm的国产静态随机存储器（SRAM）,构建了三维SRAM存储单元模型,并对重离子引起的SRAM单粒子翻转效应进行了数值模拟.计算并分析了单粒子引起的单粒子翻转和电荷收集的物理图像,得到了SRAM器件的单粒子翻转截面曲线.单粒子翻转的数值模拟结果与重离子微束、重离子宽束实验结果比较一致,表明所建立的三维器件模型可以用来研究SRAM器件的单粒子翻转效应. 关键词： 三维数值模拟 单粒子翻转 微束 宽束     

基于蒙特卡洛和器件仿真的单粒子翻转计算方法

文章提出了一种基于蒙特卡洛和器件仿真的存储器单粒子翻转截面获取方法,可以准确计算存储器单粒子效应,并定位单粒子翻转的灵敏区域.基于该方法,计算了国产静态存储器和现场可编程门阵列(FPGA)存储区的单粒子效应的截面数据,仿真结果和重离子单粒子效应试验结果符合较好.仿真计算揭示了器件单粒子翻转敏感程度与器件n,p截止管区域面积相关的物理机理,并获得了不同线性能量转移(LET)值下单粒子翻转灵敏区域分布.采用蒙特卡洛方法计算了具有相同LET、不同能量的离子径迹分布,结果显示高能离子的电离径迹半径远大于低能离子,而低能离子径迹中心的能量密度却要高约两到三个数量级.随着器件特征尺寸的减小,这种差别的影响将会越来越明显,阈值LET和饱和截面将不能完全描述器件单粒子效应结果.