SiC/SiO_2界面粗糙散射对沟道迁移率影响的Monte Carlo研究

提出了一种SiC反型层表面粗糙散射的指数模型 ,并对 6H SiC反型层迁移率进行了单电子的MonteCarlo模拟 ,模拟中考虑了沟道区的量子化效应 .模拟结果表明 ,采用表面粗糙散射的指数模型能够使SiC反型层迁移率的模拟结果和实验值符合得更好 .模拟结果还反映出有效横向电场较高时表面粗糙散射的作用会变得更显著 ,电子的屏蔽效应降低了粗糙散射对沟道迁移率的影响 ,温度升高会引起沟道迁移率降低 .     

SiC/SiO2界面粗糙散射对沟道迁移率影响的Monte Carlo研究

提出了一种SiC反型层表面粗糙散射的指数模型,并对6H-SiC反型层迁移率进行了单电子的Monte Carlo模拟,模拟中考虑了沟道区的量子化效应.模拟结果表明,采用表面粗糙散射的指数模型能够使SiC反型层迁移率的模拟结果和实验值符合得更好.模拟结果还反映出有效横向电场较高时表面粗糙散射的作用会变得更显著,电子的屏蔽效应降低了粗糙散射对沟道迁移率的影响,温度升高会引起沟道迁移率降低. 关键词： 6H-SiC 反型层迁移率 表面粗糙散射 指数模型     

Interfacial characteristics of Al/Al2O3/ZnO/n-GaAs MOS capacitor

The interfacial characteristics of Al/Al2O3/ZnO/n-GaAs metal-oxide-semiconductor (MOS) capacitor are investigated. The results measured by X-ray photoelectron spectroscopy (XPS) and high-resolution transmission electron microscopy (HRTEM) show that the presence of ZnO can effectively suppress the formations of oxides at the interface between the GaAs and gate dielectric and gain smooth interface. The ZnO-passivated GaAs MOS capacitor exhibits a very small hysteresis and frequency dispersion. Using the Terman method, the interface trap density is extracted from C-V curves. It is found that the ZnO layer can effectively improve the interface quality.     

Comparison of the formation epitaxial graphenes on Si- and process and properties of C-face 6H-SiC substrates

In this paper,the epitaxial graphene layers grown on Si-and C-face 6H-SiC substrates are investigated under a low pressure of 400 Pa at 1600 C.By using atomic force microscopy and Raman spectroscopy,we find that there are distinct differences in the formation and the properties between the epitaxial graphene layers grown on the Si-face and the C-face substrates,including the hydrogen etching process,the stacking type,and the number of layers.Hopefully,our results will be useful for improving the quality of the epitaxial graphene on SiC substrate.     

苯基氯化钕(Ⅱ)的合成及其对双烯烃聚合的催化活性

Kalbunde,Graves,Skell,用热原子蒸汽法曾将氯代苯分别与钒、铬、钼反应,得到了夹心型化合物:(C₆H₅Cl)₂V,(C₆H₅Cl)₂Cr,(C₆H₅Cl)₂Mo;Kla-bunde及Shell用钯及镁与氯代苯反应得格氏试剂型化合物:C₆H₅PdCl及C₆H₅-MgCl。不同金属与氯代苯反应,却得到两种不同类型的化合物。     

Formation of the intermediate semiconductor larger for the Ohmic contact to silicon carbide using Germanium implantation

By formation of an intermediate semiconductor layer (ISL) with a narrow band gap at the metallic contact/SiC interface, this paper realises a new method to fabricate the low-resistance Ohmic contacts for SiC. An array of transfer length method (TLM) test patterns is formed on N-wells created by P⁺ ion implantation into Si-faced p-type 4H-SiC epilayer. The ISL of nickel-metal Ohmic contacts to n-type 4H-SiC could be formed by using Germanium ion implantation into SiC. The specific contact resistance ρ_c as low as 4.23× 10^-5~Ωega \cdotcm² is achieved after annealing in N₂ at 800~°C for 3~min, which is much lower than that (>900~°C) in the typical SiC metallisation process. The sheet resistance R_sh of the implanted layers is 1.5~kΩega /\Box. The technique for converting photoresist into nanocrystalline graphite is used to protect the SiC surface in the annealing after Ge⁺ ion implantations.     

退火对非故意掺杂4H-SiC外延材料386 nm和388 nm发射峰的影响

10 K条件下,采用光致发光(PL)技术研究了不同退火处理后非故意掺杂4H-SiC外延材料的低温PL特性.结果发现,在370—400 nm范围内出现了三个发射峰,能量较高的峰约为3.26 eV,与4H-SiC材料的室温禁带宽度相当.波长约为386 nm和388 nm的两个发射峰分别位于~3.21 eV和~3.19 eV,与材料中的N杂质有关.当退火时间为30 min时,随退火温度的升高,386 nm和388 nm两个发射峰的PL强度先增加后减小,且退火温度为1573 K时,两个发射峰的PL强度均达到最大. 关键词： 光致发光 退火处理 能级 4H-SiC     

MoS2/Si tunnel diodes based on comprehensive transfer technique

Due to the pristine interface of the 2D/3D face-tunneling heterostructure with an ultra-sharp doping profile, the 2D/3D tunneling field-effect transistor (TFET) is considered as one of the most promising low-power devices that can simultaneously obtain low off-state current (I_OFF), high on-state current (I_ON) and steep subthreshold swing (SS). As a key element for the 2D/3D TFET, the intensive exploration of the tunnel diode based on the 2D/3D heterostructure is in urgent need. The transfer technique composed of the exfoliation and the release process is currently the most common approach to fabricating the 2D/3D heterostructures. However, the well-established transfer technique of the 2D materials is still unavailable. Only a small part of the irregular films can usually be obtained by mechanical exfoliation, while the choice of the chemical exfoliation may lead to the contamination of the 2D material films by the ions in the chemical etchants. Moreover, the deformation of the 2D material in the transfer process due to its soft nature also leads to the nonuniformity of the transferred film, which is one of the main reasons for the presence of the wrinkles and the stacks in the transferred film. Thus, the large-scale fabrication of the high-quality 2D/3D tunnel diodes is limited. In this article, a comprehensive transfer technique that can mend up the shortages mentioned above with the aid of the water and the thermal release tape (TRT) is proposed. Based on the method we proposed, the MoS₂/Si tunnel diode is experimentally demonstrated and the transferred monolayer MoS₂ film with the relatively high crystal quality is confirmed by atomic force microscopy (AFM), scanning electron microscopy (SEM), and Raman characterizations. Besides, the prominent negative differential resistance (NDR) effect is observed at room temperature, which verifies the relatively high quality of the MoS₂/Si heterojunction. The bilayer MoS₂/Si tunnel diode is also experimentally fabricated by repeating the transfer process we proposed, followed by the specific analysis of the electrical characteristics. This study shows the advantages of the transfer technique we proposed and indicates the great application foreground of the fabricated 2D/3D heterostructure for ultralow-power tunneling devices.     

高效液相色谱法测定发酵液中杆菌肽A

提出了高效液相色谱法测定发酵液中杆菌肽A含量的方法。地衣芽孢杆菌发酵液经离心得到杆菌肽A的粗提液。所得粗提液再经三氯乙酸提取,离心分离。取上清液用Beckman C18色谱柱分离,用乙腈和磷酸二氢钾缓冲溶液以不同体积比混合为流动相梯度洗脱,在220 nm波长处进行测定。杆菌肽A的质量浓度在1.0~15.0 g·L-1范围内与其峰面积呈线性关系,检出限(3S/N)为0.08 g·L-1。在7.37 g·L-1和11.01 g·L-1两个添加水平做回收试验,平均回收率分别为98.1%和97.4%。     

Edge termination study and fabrication of a 4Hben SiC junction barrier Schottky diode

The 4H-SiC junction barrier Schottky (JBS) diodes terminated by field guard rings and offset field plate are designed, fabricated and characterized. It is shown experimentally that a 3-μm P-type implantation window spacing gives an optimum trade-off between forward drop voltage and leakage current density for these diodes, yielding a specific on-resistance of 8.3 mΩ·cm². A JBS diode with a turn-on voltage of 0.65 V and a reverse current density less than 1 A/cm² under 500 V is fabricated, and the reverse recovery time is tested to be 80 ns, and the peak reverse current is 28.1 mA. Temperature-dependent characteristics are also studied in a temperature range of 75 ℃-200 ℃. The diode shows a stable Schottky barrier height of up to 200 ℃ and a stable operation under a continuous forward current of 100 A/cm².