电离总剂量对纳米SRAM器件单粒子翻转敏感性的影响

电离总剂量（TID）与单粒子效应（SEE）是纳米SRAM器件在航天应用中的主要威胁。随着CMOS工艺的进步,两种辐射效应在纳米SRAM器件中的协同效应出现了一些新现象,有必要进一步开展深入研究。利用γ射线以及不同种类重离子对两款纳米SRAM器件开展了辐照实验,研究了不同辐照参数、测试模式以及数据图形条件下,电离总剂量对单粒子翻转（SEU）敏感性的影响。研究结果表明,γ射线辐照过后,存储单元中反相器开关阈值减小,漏电流增大,导致SRAM存储单元抗翻转能力降低,SEU截面有明显增大;未观察到"印记效应",数据图形对测试结果没有明显影响;多位翻转（MBU）比例无明显变化。     

随机静态存储器低能中子单粒子翻转效应

 建立了中子单粒子翻转可视化分析方法,对不同特征尺寸（0.13~1.50 μm）CMOS工艺商用随机静态存储器(SRAM)器件开展了反应堆中子单粒子翻转效应的实验研究,获得了SRAM器件的裂变谱中子单粒子翻转截面随特征尺寸变化的变化趋势。研究结果表明:SRAM器件的特征尺寸越小,其对低能中子导致的单粒子翻转的敏感性越高。     

深亚微米SRAM质子单粒子翻转实验研究

宇航半导体器件运行在一个复杂的空间辐射环境中,质子是空间辐射环境中粒子的重要组成部分,因而质子在半导体器件中导致的辐射效应一直受到国内外的关注。利用兰州重离子加速器(Heavy Ion Research Facility In Lanzhou) 加速出的H2 分子打靶产生能量为10 MeV 的质子,研究了特征尺寸为0.5/0.35/0.15 μm体硅和绝缘体上硅(SOI) 工艺静态随机存储器(SRAM) 的质子单粒子翻转敏感性,这也是首次在该装置上开展的质子单粒子翻转实验研究。实验结果表明特征尺寸为亚微米的SOI 工艺SRAM器件对质子单粒子翻转不敏感,但随着器件特征尺寸的减小和工作电压的降低,SOI 工艺SRAM器件对质子单粒子翻转越来越敏感;特征尺寸为深亚微米的体硅工艺SRAM器件单粒子翻转截面随入射质子能量变化明显,存在发生翻转的质子能量阈值,CREME-MC模拟结果表明质子在深亚微米的体硅工艺SRAM器件中通过质子核反应导致单粒子翻转。Microelectronic devices are used in a harsh radiation environment for space missions. Among all the reliability issues concerned, proton induced single event upset (SEU) is becoming more and more noticeable for semiconductor components exposed on space. In this work, an experimental research of SEU induced by 10 MeV proton for static random access memory (SRAM) of 0.5, 0.35 and 0.15 m feature size is carried out on HeavyIon Research Facility in Lanzhou for the rst time. The experimental results show that proton induced SEUs in submicron and deep-submicron (SRAMs) are dominated by secondary ions generated by proton nuclear reaction events. The silicon-on-insulator SRAMs characters natural radiation-hardened SEU by proton. For the deep-submicron bulk-silicon technology SRAM, the proton SEU cross section is closely related to the proton energy and there is a threshold energy for the SEU occurrence by proton indirect ionization. CREME-MC simulation indicates that the SEU events in deep-submicron SRAM are induced by the proton nuclear reaction.     

静态随机存储器单粒子翻转效应三维数值模拟

针对特征尺寸为1.5 μm的国产静态随机存储器（SRAM）,构建了三维SRAM存储单元模型,并对重离子引起的SRAM单粒子翻转效应进行了数值模拟.计算并分析了单粒子引起的单粒子翻转和电荷收集的物理图像,得到了SRAM器件的单粒子翻转截面曲线.单粒子翻转的数值模拟结果与重离子微束、重离子宽束实验结果比较一致,表明所建立的三维器件模型可以用来研究SRAM器件的单粒子翻转效应. 关键词： 三维数值模拟 单粒子翻转 微束 宽束     

基于重离子试验数据预测纳米加固静态随机存储器质子单粒子效应敏感性

为实现对纳米DICE (dual interlocked cell)加固器件抗质子单粒子能力的准确评估,通过对65 nm双DICE加固静态随机存储器(static random access memory, SRAM)重离子单粒子翻转试验数据的分析,获取了其在重离子垂直和倾角入射时的单粒子翻转(single event upset, SEU)阈值以及离子入射最劣方位角,并结合蒙卡仿真获取不同能量质子与器件多层金属布线层发生核反应产生的次级粒子LET(linear energy transfer)值最大值以及角度分布特性,对器件在不同能量下的质子单粒子效应敏感性进行了预测,质子单粒子效应实验结果验证了预测方法的有效性以及预测结果的准确性,并提出针对DICE加固类器件在重离子和质子单粒子效应试验评估中均应开展离子最劣方位角下的倾角入射试验.     

纳米静态随机存储器质子单粒子多位翻转角度相关性研究

器件特征尺寸的减小带来单粒子多位翻转的急剧增加, 对现有加固技术带来了极大挑战. 针对90 nm SRAM(static random access memory, 静态随机存储器)开展了中高能质子入射角度对单粒子多位翻转影响的试验研究, 结果表明随着质子能量的增加, 单粒子多位翻转百分比和多样性增加, 质子单粒子多位翻转角度效应与质子能量相关. 采用一种快速计算质子核反应引起单粒子多位翻转的截面积分算法, 以Geant4中Binary Cascade模型作为中高能质子核反应事件发生器, 从次级粒子的能量和角度分布出发, 揭示了质子与材料核反应产生的次级粒子中, LET(linear energy transfer)最大, 射程最长的粒子优先前向发射是引起单粒子多位翻转角度相关性的根本原因. 质子能量、临界电荷的大小是影响纳米SRAM器件质子多位翻转角度相关性的关键因素. 质子能量越小, 多位翻转截面角度增强效应越大; 临界电荷的增加将增强质子多位翻转角度效应.     

重离子在14-nm FinFET SRAM器件引起的单粒子翻转

通过重离子实验研究了14-nm FinFET工艺静态随机存取存储器(SRAM)的单粒子翻转(SEU)特性。通过使用Weibull函数拟合SEU截面获得该器件的线性能量转移(LET)阈值:0.1 MeV/(mg/cm2)。对多位翻转(MBU)贡献的统计结果表明,当LET等于40.3 MeV/(mg/cm2)时,MBU的占比超过95%。此外,FinFET SRAM的SEU截面呈现出与Fin相关的入射角度的各向异性。该研究对基于FinFET工艺的抗辐射CMOS集成电路(IC)的设计具有一定的指导作用。     

静态单粒子翻转截面的获取及分类

 为了评估静态随机访问存储器(SRAM)型现场可编程门阵列(FPGA)器件的单粒子效应,寻求单粒子翻转敏感部位,以XCV300PQ240为实验样品,利用重离子辐照装置详细测试了该器件的静态翻转截面,并根据配置存储单元用途的不同,对翻转数据进行了分类。结果表明：SRAM型FPGA的内部存储单元对单粒子翻转效应十分敏感;配置存储器翻转主要由查找表(LUT)及互连线资控制位造成,这两者的翻转占总翻转数的97.46%;配置存储器中各类资源的单粒子翻转(SEU)敏感性并不一致,输入输出端口(IOB)控制位和LUT的单粒子翻转的敏感性远高于其它几类资源,但LUT在配置存储器中占有很大比例,在加固时应予以重点考虑。     

基于蒙特卡洛和器件仿真的单粒子翻转计算方法

文章提出了一种基于蒙特卡洛和器件仿真的存储器单粒子翻转截面获取方法,可以准确计算存储器单粒子效应,并定位单粒子翻转的灵敏区域.基于该方法,计算了国产静态存储器和现场可编程门阵列(FPGA)存储区的单粒子效应的截面数据,仿真结果和重离子单粒子效应试验结果符合较好.仿真计算揭示了器件单粒子翻转敏感程度与器件n,p截止管区域面积相关的物理机理,并获得了不同线性能量转移(LET)值下单粒子翻转灵敏区域分布.采用蒙特卡洛方法计算了具有相同LET、不同能量的离子径迹分布,结果显示高能离子的电离径迹半径远大于低能离子,而低能离子径迹中心的能量密度却要高约两到三个数量级.随着器件特征尺寸的减小,这种差别的影响将会越来越明显,阈值LET和饱和截面将不能完全描述器件单粒子效应结果.     

空间高能离子在纳米级SOI SRAM中引起的单粒子翻转特性及物理机理研究

基于蒙特卡罗方法研究空间高能离子在65—32 nm绝缘体上硅静态随机存取存储器(SOI SRAM)中产生的灵敏区沉积能量谱、单粒子翻转截面和空间错误率特性及内在的物理机理.结果表明:单核能为200 MeV/n的空间离子在60—40 nm厚的灵敏区中产生的能损歧离导致纳米级SOI SRAM在亚线性能量转移阈值区域出现单粒子翻转;宽的二次电子分布导致灵敏区仅能部分收集单个高能离子径迹中的电子-空穴对,致使灵敏区最大和平均沉积能量各下降25%和33.3%,进而引起单粒子翻转概率降低,以及在轨错误率下降约80%.发现俘获带质子直接电离作用导致65 nm SOI SRAM的在轨错误率增大一到两个数量级.     

Dependence of single event upsets sensitivity of low energy proton on test factors in 65 nm SRAM

In order to accurately predict the single event upsets(SEU) rate of on-orbit proton, the influence of the proton energy distribution, incident angle, supply voltage, and test pattern on the height, width, and position of SEU peak of low energy protons(LEP) in 65 nm static random access memory(SRAM) are quantitatively evaluated and analyzed based on LEP testing data and Monte Carlo simulation. The results show that different initial proton energies used to degrade the beam energy will bring about the difference in the energy distribution of average proton energy at the surface and sensitive region of the device under test(DUT), which further leads to significant differences including the height of SEU peak and the threshold energy of SEU. Using the lowest initial proton energy is extremely important for SEU testing with low energy protons. The proton energy corresponding to the SEU peak shifts to higher average proton energies with the increase of the tilt angle, and the SEU peaks also increase significantly. The reduction of supply voltage lowers the critical charge of SEU, leading to the increase of LEP SEU cross section. For standard 6-transitor SRAM with bit-interleaving technology,SEU peak does not show clear dependence on three test patterns of logical checkerboard 55 H, all "1", and all "0". It should be noted that all the SEUs in 65 nm SRAM are single cell upset in LEP testing due to proton's low linear energy transfer(LET) value.     

Ionizing radiation effect on single event upset sensitivity of ferroelectric random access memory

The impact of ionizing radiation effect on single event upset(SEU) sensitivity of ferroelectric random access memory(FRAM) is studied in this work. The test specimens were firstly subjected to ~(60)Co γ-ray and then the SEU evaluation was conducted using ~(209)Bi ions. As a result of TID-induced fatigue-like and imprint-like phenomena of the ferroelectric material, the SEU cross sections of the post-irradiated devices shift substantially. Different trends of SEU cross section with elevated dose were also found, depending on whether the same or complementary test pattern was employed during the TID exposure and the SEU measurement.     

Impact of energy straggle on proton-induced single event upset test in a 65-nm SRAM cell

This paper presents a simulation study of the impact of energy straggle on a proton-induced single event upset(SEU)test in a commercial 65-nm static random access memory cell. The simulation results indicate that the SEU cross sections for low energy protons are significantly underestimated due to the use of degraders in the SEU test. In contrast, using degraders in a high energy proton test may cause the overestimation of the SEU cross sections. The results are confirmed by the experimental data and the impact of energy straggle on the SEU cross section needs to be taken into account when conducting a proton-induced SEU test in a nanodevice using degraders.     

纳米静态随机存储器低能质子单粒子翻转敏感性研究

针对65, 90, 250 nm三种不同特征尺寸的静态随机存储器基于国内和国外质子加速器试验平台, 获取了从低能到高能完整的质子单粒子翻转截面曲线. 试验结果表明, 对于纳米器件1 MeV以下低能质子所引起的单粒子翻转截面比高能质子单粒子翻转饱和截面最高可达3个数量级. 采用基于试验数据和器件信息相结合的方法, 构建了较为精确的复合灵敏体积几何结构模型, 在此基础上采用蒙特卡罗方法揭示了低能质子穿过多层金属布线层, 由于能量岐离使展宽能谱处于布拉格峰值的附近, 通过直接电离方式将能量集中沉积在灵敏体积内, 是导致单粒子翻转截面峰值的根本原因. 并针对某一轨道环境预估了低能质子对空间质子单粒子翻转率的贡献.     

Impact of incident direction on neutron-induced single-bit and multiple-cell upsets in 14 nm FinFET and 65 nm planar SRAMs

Based on the BL09 terminal of China Spallation Neutron Source (CSNS), single event upset (SEU) cross sections of 14 nm fin field-effect transistor (FinFET) and 65 nm quad data rate (QDR) static random-access memories (SRAMs) are obtained under different incident directions of neutrons: front, back and side. It is found that, for both technology nodes, the "worst direction" corresponds to the case that neutrons traverse package and metallization before reaching the sensitive volume. The SEU cross section under the worst direction is 1.7-4.7 times higher than those under other incident directions. While for multiple-cell upset (MCU) sensitivity, side incidence is the worst direction, with the highest MCU ratio. The largest MCU for the 14 nm FinFET SRAM involves 8 bits. Monte-Carlo simulations are further performed to reveal the characteristics of neutron induced secondary ions and understand the inner mechanisms.     

Strategy to mitigate single event upset in 14-nm CMOS bulk FinFET technology

Three-dimensional (3D) TCAD simulations demonstrate that reducing the distance between the well boundary and N-channel metal-oxide semiconductor (NMOS) transistor or P-channel metal-oxide semiconductor (PMOS) transistor can mitigate the cross section of single event upset (SEU) in 14-nm complementary metal-oxide semiconductor (CMOS) bulk FinFET technology. The competition of charge collection between well boundary and sensitive nodes, the enhanced restoring currents and the change of bipolar effect are responsible for the decrease of SEU cross section. Unlike dual-interlock cell (DICE) design, this approach is more effective under heavy ion irradiation of higher LET, in the presence of enough taps to ensure the rapid recovery of well potential. Besides, the feasibility of this method and its effectiveness with feature size scaling down are discussed.     

Geant4 simulation of proton-induced single event upset in three-dimensional die-stacked SRAM device

Geant4 Monte Carlo simulation results of the single event upset(SEU) induced by protons with energy ranging from0.3 MeV to 1 GeV are reported.The SEU cross section for planar and three-dimensional(3 D) die-stacked SRAM are calculated.The results show that the SEU cross sections of the planar device and the 3 D device are different from each other under low energy proton direct ionization mechanism,but almost the same for the high energy proton.Besides,the multi-bit upset(MBU) ratio and pattern are presented and analyzed.The results indicate that the MBU ratio of the 3 D die-stacked device is higher than that of the planar device,and the MBU patterns are more complicated.Finally,the onorbit upset rate for the 3 D die-stacked device and the planar device are calculated by SPACE RADIATION software.The calculation results indicate that no matter what the orbital parameters and shielding conditions are,the on-orbit upset rate of planar device is higher than that of 3 D die-stacked device.