A visible-near infrared tunable waveguide based on plasmonic gold nanoshell

A tunable plasmonic waveguide via gold nanoshells immerged in a silica base is proposed and simulated by using the finite difference time-domain （FDTD） method. For waveguides based on near-field coupling, transmission frequencies can be tuned in a wide region from 660 to 900 nm in wavelength by varying shell thicknesses. After exploring the steady distributions of electric fields in these waveguides, we find that their decay lengths are about 5.948-12.83 dB/1000 nm, which is superior to the decay length （8.947 dB/1000 nm） of a gold nanosphere plasmonic waveguide. These excellent tunability and transmittability are mainly due to the unique hollow structure. These gold nanoshell waveguides should be fabricated in laboratory.     

Nonlinear optical properties of [（CH3）4N]Au（dmit）2 using Z-scan technique

The third-order optical nonlinearities of [（CH3）4N]Au（dmit）2 （dmit = 4,5-dithiolate-1,3-dithiole-2-thione） at 532 nm and 1064 nm are investigated using the Z-scan technique with pulses of picoseconds duration. The Z-scan spectra reveal a strong nonlinear absorption （reverse saturable absorption） and a negative nonlinear refraction at 532 nm. No nonlinear absorption is observed at 1064 nm. The molecular second-order hyperpolarizability γ for the [（CH3）4N]Au（dmit）2 molecule at 532nm is estimated to be as high as （2.1 ±0.1） × 10^-31 esu, which is nearly three times larger than that at 1064 nm. The mechanism responsible for the difference between the results is analysed. Nonlinear transmission measurements suggest that this material has potential applications in optical limiting.     

Synthesis and photoluminescence property of boron carbide nanowires

Large scale, high density boron carbide nanowires have been synthesized by using an improved carbothermal reduction method with B/B203/C powder precursors under an argon flow at 1100℃. The boron carbide nanowires are 5-10 μm in length and 80-100 nm in diameter. Transmission electron microscopy （TEM） and selected area electron diffraction （SAED） characterizations show that the boron carbide nanowire has a B4C rhombohedral structure with good crystallization. The Raman spectrum of the as-grown boron carbide nanowires is consistent with that of a B4C structure consisting of B11C icosahedra and C-B-C chains. The room temperature photoluminescence spectrum of the boron carbide nanowires exhibits a visible range of emission centred at 638 nm.     

Microwave properties and surface topography of softmagnetic films with high resistivity

A single layer of CoFeB and a multilayer of CoFeB--MgO films are prepared by means of DC/RF magnetron sputter deposition. The excellent microwave properties and high electrical resistivity are simultaneously achieved in the discontinuous multilayer structure of [Co₄₄Fe₄₄B₁₂(0.7nm)/MgO(0.4nm)]_{40} film. This film has a high permeability ({μ \prime }) (larger than 100 below 2.1GHz), a high magnetic loss (μ') (larger than 100 in a range from 1.5 to 3.3GHz), a resistivity of 3.3× 10^*     

Cluster-assisted generation of multicharged ions in nanosecond laser ionization of carbon bisulfide clusters at 1064nm

The photoionization of seeded carbon bisulfide molecular beam by a 1064\,nm nanosecond Nd-YAG laser with intensities varying from $0.8\times10^{11}$ to $5.6\times10^{11}$\,W/cm$^{2}$ have been studied by time-of-flight mass spectrometry. Multiply charged ions of S$^{q + }$ ($q$ = 2--6) and C$^{q +}$ ($q$ = 2--4) with kinetic energy of hundreds of electron volts have been observed, and there are strong experimental evidences indicating that those multicharged ions originate from the ionization of CS$_{2}$ neat clusters in the beam. An electron recolliding ionization model is proposed to explain the appearance of those multiply charged atomic ions under such low laser intensities.     

Green and red up-conversion emissions and thermometric application of Er^3＋-doped silicate glass

The green and red up-conversion emissions centred at about 534, 549 and 663 nm of wavelength, corresponding respectively to the ^2H11/2 → ^4I15/2, ^4S3/2 → ^4I15/2 and ^4F9/2 → ^4I15/2 transitions of Er^3＋ ions, have been observed for the Er^3＋-doped silicate glass excited by a 978 nm semiconductor laser beam. Excitation power dependent behaviour of the up-conversion emission intensity indicates that a two-photon absorption up-conversion process is responsible for the green and red up-conversion emissions. The temperature dependence of the green up-conversion emissions is also studied in a temperature range of 296-673 K, which shows that Er^3＋-doped silicate glass can be used as a sensor in high-temperature measurement.     

Green and red up-conversion emissions and thermometric application of Er3+-doped silicate glass

The green and red up-conversion emissions centred at about 534, 549 and 663\,nm of wavelength, corresponding respectively to the ${^{2}}H_{11 / 2} \to {^{4}}I_{15 / 2}$, ${^{4}}S_{3 / 2} \to {^{4}}I_{15 / 2}$ and ${^{4}}F_{9 / 2} \to {^{4}}I_{15 / 2}$ transitions of Er$^{3 + }$ ions, have been observed for the Er$^{3 + }$-doped silicate glass excited by a 978\,nm semiconductor laser beam. Excitation power dependent behaviour of the up-conversion emission intensity indicates that a two-photon absorption up-conversion process is responsible for the green and red up-conversion emissions. The temperature dependence of the green up-conversion emissions is also studied in a temperature range of 296--673\,K, which shows that Er$^{3 + }$-doped silicate glass can be used as a sensor in high-temperature measurement.     

Molecular dynamics study of ice structural evolution

Molecular dynamics simulation is employed to study the structural evolution of low density amorphous ice during its compression from one atmosphere to 2.5 GPa. Calculated results show that high density amorphous ice is formed at an intermediate pressure of -1.0 GPa; the O-O-O bond angle ranges from 83° to 113°, and the O-H… O bond is bent from 112° to 160°. Very high density amorphous ice is obtained by quenching to 80 K and decompressing the ice to ambient pressure from 160 K/1.3 GPa or 160 K/1.7 GPa; and the next-nearest O-O length is found to be 0.310 nm, just 0.035 nm beyond the nearest O-O distance of 0.275 nm.     

Passively mode-locked Nd：GdVO4 laser at 912nm

This paper demonstrates the passively mode-locked Nd：GdVO4 laser operating on the ^4F3/2-^4I9/2 transition at 912 nm by using a semiconductor saturable-absorber mirror for passive mode locking, stable continuous wave modelocked 912nm laser was achieved with a repetition rate of 176 MHz. At the incident pump power of 17.7W, 22.6mW average output power of stable mode-locked laser was obtained with a slope efficiency of 0.3%.     

Characterization of Ag adsorption on TiC（001） substrate： an ab initio study

Ag adsorptions at 0.25-3 monolayer （ML） coverage on a perfect TIC（001） surface and at 0.25 ML coverage on C vacancy are separately investigated by using the pseudopotential-based density functional theory. The preferential adsorption sites and the adsorption-induced modifications of electronic structures of both the substrate and adsorbate are analysed. Through the analyses of adsorption energy, ideal work of separation, interface distance, projected local density of states, and the difference electron density, the characteristic evolution of the adatom-surface bonding as a function of the amount of deposited silver is studied. The nature of the Ag/TiC bonding changes as the coverage increases from 0.25 to 3 MLs. Unlike physisorption in an Ag/MgO system, polar covalent component contributes to the Ag/TiC interfacial adhesion in most cases, however, for the case of 1-3 ML coverage, an additional electrostatic interaction between the absorption layer and the substrate should be taken into account. The value of ideal work of separation, 1.55 J/m^2, for a 3-ML-thick adlayer accords well with other calculations. The calculations predict that Ag does not wet TIC（001） surface and prefers a three-dimensional growth mode in the absence of kinetic factor. This work reports on a clear site and coverage dependence of the measurable physical parameters, which would benefit the understanding of Ag/TiC（001） interface and the analysis of experimental data.     

Judd-Oflet analysis of spectrum and laser performance of Ho：YAP crystal end-pumped by 1.91μm Tm：YLF laser

The Ho:YAP crystal is grown by the Czochralski technique.The room temperature polarized absorption spectra of Ho:YAP crystal was measured on a c cut sample with 1 at% holmium.According to the obtained Judd-Ofelt intensity parameters Ω2 = 1.42 × 10-20 cm2,Ω4 = 2.92 × 10-20 cm2,and Ω6 = 1.71 × 10-20 cm2,this paper calculated the fluorescence lifetime to be 6 ms for 5I7 →5 I8 transition,and the integrated emission cross section to be 2.24×10-18 cm2.It investigates the room temperature Ho:YAP laser end pumped by a 1.91 μm Tm:YLF laser.The maximum output power was 4.1 W when the incident 1.91 μm pump power was 14.4 W.The slope efficiency is 40.8%,corresponding to an optical to optical conversion efficiency of 28.4%.The Ho:YAP output wavelength was centred at 2118 nm with full width at half maximum of about 0.8 nm.     

Ultraviolet and visible upconversion dynamics in Er^3＋：YAlO3 under ^2H11/2 excitation

The luminescence of Er^3＋：YAlO3 in ultraviolet visible and infrared ranges under the 518 nm excitation of the multiples ^2H11/2 have been investigated. Ultraviolet （275 nm and 318 nm）, violet （405 nm and 413 nm） and blue （474 nm） upconversion and infrared downconversion luminescence has been observed. By means of measuring the fluorescence decay curves and using the theory of rate equations, the luminescence kinetics was studied in detail and the processes of energy transfer upconversion （ETU） and excitation state absorption （ESA） were proposed to explain the upconversion phenomena.     

Simulated human eye retina adaptive optics imaging system based on a liquid crystal on silicon device

In order to obtain a clear image of the retina of model eye, an adaptive optics system used to correct the wave-front error is introduced in this paper. The spatial light modulator that we use here is a liquid crystal on a silicon device instead of a conversional deformable mirror. A paper with carbon granule is used to simulate the retina of human eye. The pupil size of the model eye is adjustable (3--7mm). A Shack-Hartman wave-front sensor is used to detect the wave-front aberration. With this construction, a value of peak-to-valley is achieved to be 0.086Λ, where Λ is wavelength. The modulation transfer functions before and after corrections are compared. And the resolution of this system after correction (69lp/m) is very close to the diffraction limit resolution. The carbon granule on the white paper which has a size of 4.7μm is seen clearly. The size of the retina cell is between 4 and 10μm. So this system has an ability to image the human eye's retina.     

Light scattering of nanocrystalline TiO2 film used in dye-sensitized solar cells

This paper studies the light scattering and adsorption of nanocrystalline TiO2 porous films used in dye-sensitized solar cells composed of anatase and/or rutile particles by using an optical four-flux radiative transfer model. These light properties are difficult to measure directly on the functioning solar cells and they can not be calculated easily from the first-principle computational or quantitative theoretical evaluations. These simulation results indicate that the light scattering of 1 25 nm TiO2 particles is negligible, but it is effective in the range of 80 and 180 nm. A suitable mixture of small particles （10 nm radius）, which are resulted in a large effective surface, and of larger particles （150 nm radius）, which are effective light scatterers, have the potential to enhance solar absorption significantly. The futile crystals have a larger refractive index and thus the light harvest of the mixtures of such larger rutile and relatively small anatase particles is improved in comparison with that of pure anatase films. The light absorption of the 10μm double-layered films is also examined. A maximal light absorption of double-layered film is gotten when the thickness of the first layer of 10 urn-sized anatase particles is comparable to that of the second larger rutile layer.     

Tunable phase-stabilized infrared parametric laser source

This paper reports that the tunable self-phase-stabilized infrared laser pulses have been generated from a two-stage optical parametric amplifier. With an 800 nm pump source, the output idler pulses are tunable from 1.3 μm to 2.3 μm, and the maximum output energy of the idler pulses is higher than 1 mJ at 1.6 μm by using 6 mJ pump laser. A carrier-envelope phase fluctuation of ～ 0.15 rad (rms) for the idler pulses is measured for longer than one hour by using a home build f-to-2f interferometer.     

Plasmon resonances in gold-coated tilted fiber Bragg gratings

The transmission spectrum of fiber Bragg gratings with gratings planes tilted at a small angle (2 degrees -10 degrees) relative to the fiber axis shows a large number of narrowband cladding mode resonances within a 100 nm wide spectrum. When a gold coating with a thickness between 10 and 30 nm is deposited on the fiber, the transmission spectrum shows anomalous features for values of the outside medium refractive index between 1.4211 and 1.4499. These features are shown to correspond to the excitation of surface plasmon resonances at the external surface of the gold film.     

The research on suspended ZnO nanowire field-effect transistor

This paper reports that a novel type of suspended ZnO nanowire field-effect transistors (FETs) were successfully fabricated using a photolithography process, and their electrical properties were characterized by I--V measurements. Single-crystalline ZnO nanowires were synthesized by a hydrothermal method, they were used as a suspended ZnO nanowire channel of back-gate field-effect transistors (FET). The fabricated suspended nanowire FETs showed a p-channel depletion mode, exhibited high on--off current ratio of ～10⁵. When V_DS=2.5 V, the peak transconductances of the suspended FETs were 0.396 μS, the oxide capacitance was found to be 1.547 fF, the pinch-off voltage V_TH was about 0.6 V, the electron mobility was on average 50.17 cm²/Vs. The resistivity of the ZnO nanowire channel was estimated to be 0.96× 10²Ω cm at V_GS = 0 V. These characteristics revealed that the suspended nanowire FET fabricated by the photolithography process had excellent performance. Better contacts between the ZnO nanowire and metal electrodes could be improved through annealing and metal deposition using a focused ion beam.     

Synthesis and characterization of Ca2Sn1-xCexO4 with blue luminescence originating from Ce^4＋ charge transfer transition

Ce^4＋-doped Ca2SnO4 with a one-dimensional structure, which emits bright blue light, is prepared by using a solid-state reaction method. The x-ray diffraction results show that the Ce^4＋ ions doped in Ca2SnO4 occupy the Sn^4＋ sites. The excitation and emission spectra of Ca2Sn1-xCexO4 appear to have broad bands with peaks at - 268nm and -442nm, respectively. A long excited-state lifetime （-83μs） for the emission from Ca2Sn1-xCexO4 suggests that the luminescence originates from a ligand-to-metal Ce^4＋ charge transfer （CT）. The luminescent properties of Ca2Snl_xCexO4 have been compared with those of Sr2CeO4, which is the only material reported so far to show Ce^4＋ CT luminescence. More interestingly, it is observed that the emission intensity of Ca2Sn1-xCexO4 with a small doping concentration （x - 0.03） is comparable to that of Sr2CeO4 in which the concentration of active centre is 100%.     

Growth studies of m-GaN layers on LiAlO2 by MOCVD

This paper reports that the m-plane GaN layer is grown on （200）-plane LiAlO2 substrate by metal-organic chemical wpour deposition （MOCVD） method. Tetragonal-shaped crystallites appear at the smooth surface. Raman measurement illuminates the compressive stress in the layer which is released with increasing the layer＇s thickness. The high transmittance （80%）, sharp band edge and excitonic absorption peak show that the GaN layer has good optical quality. The donor acceptor pair emission peak located at -3.41 eV with full-width at half maximum of 120 meV and no yellow peaks in the photoluminescence spectra partially show that no Li incorporated into GaN layer from the LiAlO2 substrate.     

Continuous-wave mid-infrared intracavity singly resonant optical parametric oscillator based on periodically poled lithium niobate

This paper reports a continuous-wave (CW) mid-infrared intracavity singly resonant optical parametric oscillator based on periodically poled lithium niobate (PPLN) pumped by a diode-end-pumped CW Nd:YVO$_{4}$ laser. Considering the thermal lens effects, it adopted an optical ballast lens and the near-concentric cavity for better operation. At the PPLN's grating period of 28.5\,$\mu$m and the temperature of 140\du, the maximum idler output power of 155\,mW at 3.86\,$\mu$m has been achieved when the 808\,nm pump power is 8.5\,W, leading to an optical-to-optical conversion efficiency of 1.82{\%}.