介孔SiO_2-TiO_2无机毛细管开管柱的制备及氨基酸混合物的分离

采用溶胶-凝胶法制备了SiO2/TiO2混溶胶。把溶胶抽入柱中,通过溶剂热反应和高温焙烧制得无机杂化毛细管电色谱开管柱。采用扫描电子显微镜(SEM)、能谱(EDS)、N2吸附-脱附(BET)对开管柱的结构形貌、成分和孔径分布进行了表征。以三种混合氨基酸作为分析物,获得了较好分离。     

本体共聚合制备丙烯/1-丁烯合金及表征

以球形高效负载的TiCl4/MgCl2/邻苯二甲酸二异丁酯(DIBP)为催化剂,采用本体聚合方法进行丙烯与1-丁烯共聚合研究.考察了共单体效应对共聚活性及聚合物立构规整性的影响;表征了共聚物的结构.结果表明,随着1-丁烯/丙烯投料比的增加,聚合活性呈先升高后降低的趋势,在1-丁烯/丙烯摩尔投料比为0.26条件下聚合活性达到最高,并随着共聚物中1-丁烯含量的增加,共聚物的熔点明显下降,分子量降低,分子量分布变窄,同时共聚物力学性能有明显提高,透明度逐渐增加.     

毛细管电泳法手性拆分4种氨酸和2种手性药物对映体

以双(6-氧-β-羧甲基-1,4-丁烯二酸单酯)-β-环糊精(DOCB-β-CD）作为手性添加剂,利用毛细管电泳对氨基酸和手性药物对映体进行拆分研究。 以20 mmol/L磷酸盐为缓冲溶液,考察了手性添加剂的浓度及缓冲溶液的pH值与分离电压等对拆分效果的影响,并在其优化条件下,实现了4种DL-氨基酸（苯丙氨酸、色氨酸、酪氨酸和组氨酸）以及手性药物（罗格列酮和酮洛芬）对映体的基线分离。     

Characteristics of Nd:YGG Laser Operating at 4F3/2-4I9/2

The laser properties of the Nd：YGG crystal are investigated. The absorption spectrum from 500 to 90Onto and emission spectrum from 850 to 1400nm of Nd：YGG are measured. As much as 1.35 W output power of fundamental laser operating at 935 and 938nm with a slope efficiency of 15.7% and 105mW output power of frequency doubled blue laser are successfully obtained.     

Characteristics of Nd：GdVO4 Laser with Different Nd-Doping Concentrations

We report the properties of a compact diode-pumped continuous-wave Nd：GdV04 laser with a linear cavity and different Nd-doped laser crystals. In a 0.2at.% Nd-doped Nd：GdVO4 laser, 1.54 W output laser power is achieved at 912nm wavelength with a slope efficiency of 24.8% at an absorbed pump power of 9.4W. With 0.3at.% Nd-doping concentration, we can obtain the either single-wavelength emission at 1064nm or 912nm or the dual-wavelength emission at 1064nm and 912nm by controlling the incident pump power. From an incident pump power of 11.6 W, the 1064nm emission between ^4Fa/2 and ^4I11/2 is suppressed completely by the 912nm emission between ^4Fa/2 and ^4I9/2. We obtain 670 mW output of the 912nm single-wavelength laser emission with a slope efficiency of 5.5% by taking an incident pump power of 18.4 W. Using a Nd：GdV04 laser with 0.4at.% Nd-doping concentration, we obtain either the single-wavelength emission at 1064nm or the dual-wavelength emission at both 1064nm and 912nm by increasing the incident pump power. We observe a strong competition process in the dualavelength laser.     

Ultrafast carrier dynamics in purified and as-grown single-walled carbon nanotube films

Ultrafast time-resolved optical transmissions in purified and as-grown single-walled carbon nanotube films are measured at a temperature of 200K. The signal of the purified sample shows a crossover from photobleaching to photoabsorption. The former and the latter are interpreted as the state filling and the red shift of the π-plasmon, respectively. The signal of the as-grown sample can be perfectly fitted by a single-exponential with a time constant of 232fs. The disappearance of the negative component in the as-grown sample is attributed to the charge transfer between the semiconducting nanotubes and the impurities.     

烯丙基-β-环糊精基手性毛细管电色谱整体柱的一步法制备及其性能

以烯丙基-β-环糊精、甲基丙烯酸缩水甘油酯和乙二醇二甲基丙烯酸酯为功能单体,一步键合制备了环糊精聚合物毛细管整体柱.在电色谱模式下18种氨基酸对映体得到成功分离.研究发现,将修饰的环糊精衍生物作为功能单体制备出的毛细管整体柱对疏水性,含氨基和苯环的手性化合物具有良好的保留行为,并具有良好的稳定性和重现性.新型电色谱柱也被应用于手性药物的分离.     

甲基丙基酸丁酯/SiO2/TiO2有机-无机杂化毛细管整体柱的制备及应用

采用溶胶-凝胶法制备了SiO2/TiO2杂化材料,并通过双官能团试剂3-(甲氧基硅烷基)甲基丙烯酸丙酯(γ-MAPS)对其进行改性;改性溶胶与甲基丙基酸丁酯(BMA)作为功能单体,在毛细管中进行原位聚合反应,制备了新型的有机-无机杂化毛细管整体柱。 采用扫描电子显微镜观察了整体柱柱床的形貌。 以硫脲为电渗流标记物对所制备的整体柱进行了柱性能评价,考察了柱的稳定性和重现性,获得了88000 plates/m的柱效;考察了中性物质在柱上的的保留行为,得出该柱具有反相电色谱保留性能。 通过对2种短肽(磷酸肽和非磷酸肽)洗脱测试,实现了对磷酸肽的有效富集与分离。     

基于故障树和混沌粒子群算法的锻压机床故障诊断方法

锻压机床由于生产效率高和材料利用率高的特点,被广泛应用于各领域.然而,锻压机床发生故障时,其故障种类繁多、故障数据量大,所以对锻压机床故障源的快速、准确诊断较困难.针对该问题,文章提出一种将故障树分析法和混沌粒子群算法相融合的方法,对锻压机床的故障源进行故障诊断.该方法是先通过故障树分析法对锻压机床的故障进行分析从而得到故障模式及其故障概率,然后由得到的故障模式和已知的故障维修经验分析归纳出故障模式的学习样本,再根据得到的故障概率运用混沌粒子群算法的遍历性快速、准确地诊断出锻压机床发生故障的精确位置.文章提出的方法以锻压机床的伺服系统为例进行了故障诊断实验,将该实验结果与遗传算法、粒子群算法进行对比.实验结果表明,文章的算法在锻压机床伺服系统的故障诊断中准确度更高、速度更快.     

双(环戊二烯基)二氯化锆催化合成乙烯-笼型倍半硅氧烷杂化共聚物及其结构表征

通过双(环戊二烯基)二氯化锆(Cp2ZrCl2)催化剂和改良的甲基铝氧烷(MMAO)助催化剂, 合成了无机-有机杂化共聚物. 研究了2种具有不同单乙烯基反应基团的笼型倍半硅氧烷(POSS)与乙烯的聚合. 对共聚产物的结构、 热力学性质、 分子量及其分布等进行了研究. 共聚单体(POSS)的插入率在0.01%~0.30%之间, 随着共聚单体在共聚物中摩尔分数的增大, 聚合物的熔点和熔解热降低. 共聚物的热重分析结果显示, 乙烯-POSS共聚物拥有更高的热分解温度以及较高的热分解残留量. 随着POSS的加入, 聚合物的分子量明显提高, 聚合物的分子量分布变宽.