白术挥发性成分的超临界流体萃取及其分析

采用超临界流体萃取白术挥发油成分,对萃取条件进行优化,并用气相色谱、气相色谱－质谱分析鉴定出超临界流体萃了的挥发油中22个化合物。最佳的超临界流体萃取条件为压力22.0MPa,温度60℃,0.5mL乙醇作改性,先静态萃取10min(CO2用量2.0mL),再动态萃取40min(CO2流速为0.3mL/min)。将超临界流体萃取与水蒸气蒸馏进行对比,水蒸气蒸馏5h的油收率仅为超临界流体萃取1h油收率的10.32%,证明超临界流体萃取替代传统萃取的必要性。     

超临界CO_2流体萃取金线莲中的腺苷

本文研究了超临界CO_2流体萃取金线莲中腺苷的方法。文中用光度法测定腺苷的含量,分别用单因素和正交设计试验对超临界CO_2流体萃取腺苷的条件进行优化。结果显示萃取腺苷的最佳条件为:温度55℃,压力37 MPa,静态萃取时间45 min,夹带剂为85%甲醇,夹带剂用量4 mL。在最佳萃取条件下,金线莲中腺苷的提取量为425.85μg·g~(-1)。     

薤白挥发油成分的超临界CO2萃取及GC-MS分析

采取超临界CO2萃取和水蒸气蒸馏两种方法提取薤白中的挥发油,比较了两种提取方法得到的挥发油的理化性质,并利用GC-MS对它们进行了定性、定量分析。两种方法的主要提取物均为含硫化合物,但超临界CO2萃取法得到的含硫化合物的数量和质量都高于水蒸气蒸馏法得到的提取物。采用水蒸气蒸馏法提取8 h得到的萃取率为1.72%。通过设计的超临界CO2萃取的正交实验,得到了最佳萃取工艺条件为:压力25 MPa,温度40℃,CO2流量为25L/h。最佳萃取时间为120 min,萃取率为4.41%,是水蒸气蒸馏法萃取率的2.8倍。实验结果表明,超临界CO2萃取法简单易行,可以较快速、有效地提取薤白中的挥发油。     

超临界二氧化碳萃取柿叶黄酮的工艺研究

本文研究了超临界流体萃取柿叶总黄酮苷类化合物的影响因素,并对生产工艺进行了优化设计。试验结果表明:萃取时压力、温度、时间、CO2流量对萃取率的影响程度依次递减。最佳工艺条件为:萃取压力30MPa、萃取温度50℃、萃取时间3h、CO2流量30kg·h-1。用超临界流体萃取法得到的柿叶总黄酮苷类化合物萃取物纯度高,无异味,色泽金黄。     

超临界流体萃取法对有机锡化合物的选择性萃取

研究了用超临界流体萃取法直接从脂肪基质的固体样品（大豆粉）中选择性地萃取有机锡化合物的方法。模拟试样萃取结果表明：用较低压力和较高温度的超临界态ＣＯ２作流动相时，有机锡达到最大萃取率，而脂肪类物质仅被少量萃取，从而消除了脂肪类物质对超临界流体色谱法测定有机锡的干扰。     

超临界流体萃取法对有机锡化合物的选择性萃取

 研究了用超临界流体萃取法直接从脂肪基质的固体样品（大豆粉）中选择性地萃取有机锡化合物的方法。模拟试样萃取结果表明：用较低压力和较高温度的超临界态ＣＯ２作流动相时，有机锡达到最大萃取率，而脂肪类物质仅被少量萃取，从而消除了脂肪类物质对超临界流体色谱法测定有机锡的干扰。     

西藏红景天超临界流体萃取及萃取物的GC-MS分析

探讨了西藏红景天的超临界流体萃取工艺,应用GC-MS方法对萃取物成分进行了分析.结果表明,最佳提取工艺条件为:夹带剂乙醇的体积分数为85%,萃取温度为55℃,萃取压力为30 MPa,萃取时间为2 h.此条件下红景天萃取物得率为5.65%.GC-MS分析鉴定出32种组分,主要为醇类、酯类、烷烃、烯烃等化合物,并应用峰面积归一化法测定了其相对含量.     

环境模拟样品中多环芳烃的超临界流体萃取I．利用正交设计选择最佳萃取条件

采用正交设计实验方法，研究了从环境模拟样品中超临界流体萃取（ＳＦＥ）多环芳烃（ＰＡＨ）的最佳萃取条件。着重考察了超临界流体的压力、温度和用量等对萃取效率的影响。结果表明，压力的影响居第一位，温度影响次之，超临界ＣＯ２的用量的影响居第三位。建立了选择超临界流体萃取条件的简单方法     

环境模拟样品中多环芳烃的超临界流体萃取：Ⅰ.利用正交设…

采用正交设计实验方法，研究了从环境模拟样品中超临界流体萃取多环芳烃的最佳萃取条件。着重考察了超临界流体的压力、温度和用量等对萃取效率的影响。     

超临界二氧化碳流体萃取法测定玩具中15种致敏芳香化合物

该文以欧盟新玩具指令中限用或禁用的15种致敏芳香化合物为研究目标,研究了超临界二氧化碳萃取压力、温度、夹带剂等条件对萃取效率的影响,建立了超临界流体萃取/气相色谱-质谱联用仪测定玩具中15种致敏芳香化合物的分析方法。最佳萃取条件为：萃取温度50 ℃,压力300 bar,二氧化碳流速30 g/min,夹带剂甲醇含量3%,动态萃取30 min,静态萃取30 min。萃取物经DB-17MS色谱柱分离后,采用质谱仪进行检测,内标法定量。15种化合物在0.02~60 μg/mL范围呈良好线性,相关系数为0.993 2~0.999 9,检出限(S/N=10) 为0.02~0.09 μg/mL。该法检测聚丙烯(PP)、聚乙烯(PE)、丙烯腈-丁二烯-苯乙烯(ABS)塑料的回收率分别为79.6%~114.5%、75.0%~118.9%、72.7%~114.9%,相对标准偏差为3.2%~11.0%、0.6%~11.6%、3.5%~11.0%。建立的方法灵敏、环保,可用于玩具中致敏芳香化合物的检测。     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

恶臭嗅辨实验室建设探讨

针对恶臭测试的环境影响问题,提出了解决的实例方案,并对方案的要点及优缺点进行讨论,此方案在实际操作中具有较好的效果。     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

解决能源问题的新途径--光解水制氢的研究

面对日益枯竭的能源危机,氢能是一种洁净、最有前景的替代能源。目前在各种制氢的方法中光催化分解水制氢的研究最多,光解水过程中催化剂最关键,本文对利用太阳能光解水的途径、提高光催化反应效率以及光催化剂的开发研究进行了综述。