基于电化学方法测定饮用水源水中的痕量铜离子

本文建立了一种饮用水源水中痕量溶解态铜离子（Cu²⁺）的定性和定量电化学检测方法. 该方法首先通过电化学循环伏安法于玻碳电极表面制备粒径约为70 nm的金纳米粒子（Au NPs）,然后采用方波阳极溶出伏安法进行待测水样中Cu²⁺的定性定量分析. 研究结果表明,对于标准溶液,方法的检出限为1.3μg·L^-1,线性范围在2 ~ 50μg·L^-1之间,常见重金属离子对其定性定量分析几无影响. 在此基础上,将该方法应用于福建省重要的饮用水源水--闽江中游水样中Cu²⁺的含量分析,所得测试结果与国家标准方法（石墨炉原子吸收光谱法）无显著性差异,标准偏差在20%以内. 本方法具有电极制备简单、测定成本低以及分析快速等优点,进一步优化电极制备方法以提高方法的重现性和定量准确度,将可望用于现场测定各种饮用水源水中的痕量溶解态Cu²⁺.     

Temperature Dependent Spectroscopic Properties of Cu+ and Dy3+ Co-Doped Phosphate Glass: Band Gap Analysis and Cu Nanocluster-Enhanced Dy3+ Luminescence

This paper reports on the effects of temperature on light absorption and emission in Cu⁺ and Dy³⁺ co-doped phosphate glass, which is of interest for photonic applications. First, the temperature dependence of the absorption edge of the glass in connection with Cu⁺ ions absorption was assessed. A thermally-induced red shift attributed to Cu⁺ ion-lattice interactions was observed and analyzed through optical band gap determinations in the context of indirect-allowed transitions. Application of the Varshni model for the dependence of the energy gaps with temperature allowed to estimate the 0 K energy gap at 2.87 (±0.01) eV. Furthermore, Dy³⁺ photoluminescence (PL) along with Cu nanoparticles (NPs) absorption was monitored in real-time during an isothermal treatment by the in situ concurrent PL and absorption microspectroscopy technique. Periods of enhancement and quenching of Dy³⁺ emission linked to bidirectional energy transfer processes involving non-plasmonic Cu clusters and plasmonic Cu NPs were revealed. The formation of Cu NPs was promoted by tin(II) used as reductant. It is the first time to the author's knowledge that the 0 K energy gap is estimated for a highly Cu⁺-doped glass and that the enhancement of Dy³⁺ PL by Cu clusters is exposed.     

Cu2+ Effects on Beta-Amyloid Oligomerisation Monitored by the Fluorescence of Intrinsic Tyrosine

A non-invasive intrinsic fluorescence sensing of the early stages of Alzheimer's beta amyloid peptide aggregation in the presence of copper ions is reported. By using time-resolved fluorescence techniques the formation of beta amyloid-copper complexes and the accelerated peptide aggregation are demonstrated. The shifts in the emission spectral peaks indicate that the peptides exhibit different aggregation pathways than in the absence of copper.     

Phytochemical compounds and anti-corrosion activity of Veronica rosea

The aim of this work is the phytochemical study of the butanolic extract of the aerial parts of Veronica rosea. Four compounds 1–4 have been isolated using different chromatographic methods. The structures of these compounds were determined by NMR spectral analysis and mass spectroscopy. The adsorption and anticorrosion effects of this extract were investigated towards the corrosion of copper in 1 M HNO₃ aqueous by the weight loss technique and potentiodynamic polarization. The results showed that the butanolic extract is a good inhibitor and the inhibition efficiency increases with increasing of concentration of the inhibitor. The adsorption of this extract on the copper specimen surface was spontaneous and obeyed the Langmuir’s adsorption isotherm. Large value of adsorption equilibrium Constant (K _ads = 35 L g^?1) was obtained. The polarization experiments confirmed the data obtained by gravimetric weight-loss. Tafel plot of polarization curves indicates that the extract acts as a mixed type inhibitor.     

Cu‐Based Nanoparticles as Emerging Environmental Catalysts

This account provides an overview of current research activities on nanoparticles containing the earth‐abundant and inexpensive element copper (Cu) and Cu‐based nanoparticles, especially in the field of environmental catalysis. The different synthetic strategies with possible modification of the chemical/ physical properties of these nanoparticles using such strategies and/or conditions to improve catalytic activity are presented. The design and development of support and/or bimetallic systems (e. g., alloys, intermetallic, etc.) are also included. Herein, we report synthetic approaches of Cu and Cu‐based nanoparticles (monometallic copper, bimetallic copper and copper (II) oxide nanoparticles/nanostructures) and impregnation of such nanoparticles onto support material (e. g., Co₃O₄ nanostructure), along with their applications as environmental catalyst for various oxidation and reduction reactions. Finally, this account provides necessary advances and perspectives of Cu‐based nanoparticles in the environmental catalysis.     

Preparation and characterization of slice-like Cu2(OH)3NO3 superhydrophobic structure on copper foil

Superhydrophobic structure was prepared on copper foil via a facile solution-immersion method. Thus slice-like Cu₂(OH)₃NO₃ crystal was prepared on the surface of the copper foil by sequential immersing in an aqueous solution of sodium hydroxide and cupric nitrate. And the superhydrophobic structure was obtained by modifying the slice-like Cu₂(OH)₃NO₃ crystal with 1H,1H,2H,2H-perfluorodecyltriethoxysilane (FAS-17). The morphologies, chemical compositions and states, and hydrophobicity of the surface-modifying films on the copper foil substrates were analyzed by means of scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and water contact angle measurement. Moreover, the thermal stability of the slice-like structure was also evaluated using thermogravimetric analysis (TGA). It was found that roughening of the copper foil surface helped to increase the hydrophobicity to some extent, but no superhydrophobicity was obtained unless the slice-like Cu₂(OH)₃NO₃ crystal formed on the Cu substrate was modified with 1H,1H,2H,2H-perfluorodecyltriethoxysilane. Besides, the superhydrophobicity of the FAS-17-modified slice-like Cu₂(OH)₃NO₃ structure was closely related to the surface morphology. And this hydrophobic structure retained good superhydrophobic stability at elevated temperature and in long-term storage as well, which should be critical to the application of Cu-matrix materials in engineering.     

对以并五苯和酞菁铜为不同有源层的有机薄膜晶体管特性研究

通过扫描电镜和X射线衍射对SiO₂衬底上生长并五苯和酞菁铜薄膜的表面形貌进行表征,并得到在SiO₂衬底上生长的并五苯薄膜是以岛状结构生长,其大小约为100nm,且薄膜有较好的结晶取向,呈多晶态存在. 酞菁铜薄膜则没有表现出明显的生长机理,其呈非晶态存在. 还对通过掩膜的方法制作得以酞菁铜和并五苯为有源层的顶栅极有机薄膜晶体管的特性进行了研究. 有源层的厚度为40nm,绝缘层SiO₂的厚度为250nm,器件的沟道宽长比(W/关键词： 有机薄膜晶体管 并五苯薄膜 酞菁铜薄膜 μ_EF)')" href="#">场效应迁移率(μ_EF)     

ICF靶用泡沫铜的制备与表征

 以次磷酸钠为还原剂的化学镀进行导电化处理,研究了ICF靶用泡沫铜的电沉积工艺。采用扫描电子显微境和X射线衍射仪对制备过程中各阶段泡沫铜的微观结构进行了表征。结果表明：经化学镀后可获得晶粒尺寸小、分布均匀的铜沉积层。电沉积后铜沉积层主要由0.55 μm的小颗粒组成,并且出现突出大颗粒的形貌特征。在氢气氛围下,经700 ℃热处理后,铜颗粒进一步长大,沉积层结晶致密。制备的泡沫铜呈3维网络状结构,分布均匀,密度为0.19 g/cm³,孔径分布为400～600 μm,孔隙率达97.9％。     

10μm级聚酯薄膜介质电临界击穿场强初步研究(英文)

分析了聚酯薄膜电击穿可能的模型,如本征击穿模型和电一机械击穿模型,估算了两种模型下常用聚合物介质的临界击穿场强。实验研究了平板电极结构下10μm级聚酯薄膜的自击穿电压,得出了聚酯薄膜的临界击穿场强450-500kV／mm。实验结果与理论计算值比较表明：本征击穿模型下的聚酯薄膜临界击穿场强都远小于实验结果,电～机械击穿模型下聚酯薄膜临界击穿场强大于实验结果。     

Copper(II) perchlorate complexes with antipyrine: synthesis,structure, cytotoxicity and DFT calculations

The synthesis, structure and properties of copper(II) perchlorate complexes with antipyrine (AP), [Cu(AP)₄(H₂O)](ClO₄)₂ and [Cu(AP)₅](ClO₄)₂, are described and compared with those of alternative compounds containing different AP ligands.