Synthesis,Characterization, and Catalytic Activity of New Cu(II) Complexes of Schiff Base: Effective Catalysts for Decolorization of Acid Red 37 Dye Solution

In this paper, three new Cu(II) Schiff base complexes with three different anions (acetate, chloride, and nitrate) were successfully synthesized and characterized by elemental analysis, mass spectra, molar conductance, FT‐IR, NMR,UV–vis spectroscopy, magnetic moment, ESR, and thermal analysis. The catalytic performances of these complexes in decolorization of azo dye, Acid Red 37, were evaluated. Copper(II) complexes were found to be an efficient catalyst for decolorization of Acid Red 37 in the presence of hydrogen peroxide. The catalytic investigation revealed that the Cu(II) complex with acetate anion (complex 1 ) performed the highest catalytic activity. The kinetics of the decolorization of AR37 with this catalyst was studied, and the observed rate constant was determined. The effects of different reaction parameters such as catalyst dosage, solution pH, initial concentration of H₂O₂, dye solution, and reaction temperature on the reaction rate constant were studied. The best reacting conditions should be catalyst dosage = 0.004 g, initial pH 4.0, [H₂O₂]₀ = 0.8 M, and [AR37]₀ = 1.16 M at temperature 25°C. Under these conditions, about 99% of AR37 was decolorized within 60 min. The results indicated that the Cu(II) complex with the acetate anion is a promising catalyst for wastewater treatment.     

Metal-Mediated Directional Capping of Rod-Packing Metal–Organic Frameworks

Two new rod-packing metal–organic frameworks (RPMOF) are constructed by regulating the in situ formation of the capping agent. In CPM-s7, carboxylate linkers extend 1D manganese-oxide chains in four additional directions, forming 3D RPMOF. The substitution of Mn²⁺ with a stronger Lewis acidic Co²⁺, leads to an acceleration of the hydrolysis-prone sulfonate linker, resulting in presence of sulfate ions to reduce two out of the four carboxylate-extending directions, and thus forming a new 2D rod-packing CPM-s8. Density functional theory calculations and magnetization measurements reveal ferrimagnetic ordering of CPM-s8, signifying the potential of exploring 2D RPMOF for effective low-dimensional magnetic materials.     

Synthesis and Spectral Analysis of Charge-Transfer Complexes of Triamterene Drug with 2,4,6-Trinitrophenol, 4-Nitrophenol, 4-Nitroacetophenone,and m-Dinitrobenzene Acceptors in the Solid-State Form: Experimental and DFT Studies

Journal of Applied Spectroscopy - The present work aims to focus on the synthesis and spectral studies of the charge-transfer interaction between the nitro organic acceptors molecules [e.g.,...     

Halogen‐bonded adduct of 1,2‐dibromo‐1,1,2,2‐tetrafluoroethane and 1,4‐diazabicyclo[2.2.2]octane

Halogen bonding is an intermolecular interaction capable of being used to direct extended structures. Typical halogen‐bonding systems involve a noncovalent interaction between a Lewis base, such as an amine, as an acceptor and a halogen atom of a halofluorocarbon as a donor. Vapour‐phase diffusion of 1,4‐diazabicyclo[2.2.2]octane (DABCO) with 1,2‐dibromotetrafluoroethane results in crystals of the 1:1 adduct, C₂Br₂F₄·C₆H₁₂N₂, which crystallizes as an infinite one‐dimensional polymeric structure linked by intermolecular N...Br halogen bonds [2.829 (3) Å], which are 0.57 Å shorter than the sum of the van der Waals radii.     

Geranyl Acetate Emulsions: Surfactant Association Structures and Stability

The phase diagram of fragrance oil, geranyl acetate, water, and a surfactant, Laureth 4, was used to calculate the surfactant association structures present in emulsions with constant O/W ratio for increased fractions of surfactant. The liquid crystal appeared in the emulsion at a critical value of the surfactant fraction and additional surfactant caused an approximately linear increase of it, while the fraction of the aqueous phase experienced a corresponding reduction. The result of the calculations was confirmed by optical microscopy observation with the samples between crossed polarizers. The calculations revealed the formation of vesicles from the liquid crystal to result in a drastic reduction of the “free” aqueous phase, due to the amount of the aqueous liquid forming the core of the vesicle.     

Synthesis of Tetrazoloquinoline‐Based Mono‐ and Bisphosphonate Esters as Potent Anti‐Inflammatory Agents

Several new α‐alkoxy‐ and α‐hydroxyphosphonate derivatives of tetrazole‐quinolines were synthesized from the reaction of 2‐azidoquinolines 3‐carboxaldehyde 1a,b with trialkyl phosphites and dialkyl phosphites. On the other hand, azaphospholes 12a,b were obtained by treating 1a,b with tris(dimethylamino)phosphine. Furthermore, Perkin‐type condensation of 1a,b and tetraethyl methylenebisphosphonate provided the corresponding tetrazoloquinoline‐based bisphosphonate esters 14a,b . Based on the prediction results (PASS program), the anti‐inflammatory activity of the prepared compounds was determined in vivo by the acute carrageenin‐induced paw edema in rats. Many of the new compounds exhibit considerable anti‐inflammatory properties at a dose of 50 mg/kg body weight. Especially 14a and 14b revealed remarkable activities compared with indomethacin, which was used as a reference standard in this study.     

DC Electrical Conductivity of the Direct Electrochemically Synthesized Polythiophene Metal Complexes

Electrochemical anodic oxidation of a metal anode in an acetone solution of 2,5-diamino-3,4-dicyanothiophene gave the polythiophene metal complexes of Co, Ni, Cu, Zn, Cd, and Sn. Chemical analyses, as well as FTIR and electronic spectral data, are presented to confirm the formulation of the isolated materials. DC electrical conductivity measurements of the polymer complexes were measured in the range 300–500 K in the annealed and 5% doped forms. The products gave electrical conductivity in the semi-conducting region that increased by heat.     

Facile synthesis of metal-polyphenol-formaldehyde coordination polymer colloidal nanoparticles with sub-50 nm for T_1-weighted magnetic resonance imaging

Plant polyphenol-based coordination polymers(CPs) with ultra-small particle size and tailorable compositions are highly desired in biomedical applicatio ns,but their synthesis is still challenging due to the sophisticated coordination assembly process and unavoidable self-oxidation polymerization of polyphenol. He rein,a general ligand covalent-modification mediated coordination assembly strategy is proposed for the synthesis of water-dispersible CPs with tunable metal species(e.g., Gd,Cu,Ni,Zn,Fe)and ultra-small diameter(8.6-37.8 nm) using nontoxic plant polyphenol(e.g..tannic acid,gallic acid) as a polymerizable ligand.Polyphenol molecules react with formaldehyde firstly,which can effectively retard the oxidation induced self-polymerization of polyphenol and lead to the formation of metal ions containing CPs colloidal nanoparticles.These ultrafine nanoparticles with stably chelated metal io ns are highly water dispersible and thus advantageous for bioimaging.As an example,ultra-small Gd contained CPs exhibit higher longitudinal relaxivity(r_1=25.5 L mmol ~1 s ~1) value with low r_2/r_1(1.19) than clinically used Magnevist(Gd-DTPA,r_1=3.7 L mmol ~1 s ~1).Due to the enhanced permeability and retention effect,they can be further used as a positive contrast agent for T_1-weighted MR imaging of tumour.     

Novel flame retardant paint based on Co(II) and Ni(II) metal complexes as new additives for surface coating applications

The study is focused on the synthesis of a new Co(II) and Ni(II) metal complexes, which is synthesized by the reaction of the isatin 4‐aminoantipyrine Schiff base ligand with selected divalent Co(II) and Ni(II) ions and their possible applications as flame retardant additives in paint formulations for surface coating application. The prepared metal complexes were characterized using a combination of Fourier transform infrared, elemental analysis, proton nuclear magnetic resonance, ¹³C‐NMR spectra, and mass spectroscopy. The prepared Schiff base ligand metal complexes were physically added to alkyd paint formulation to give coating formulations at a laboratory scale and then applied onto plywood and steel panels using a brush. The ignitability and oxygen index values obtained indicated that the paint which contained the prepared Co(II) and Ni(II) metal complexes as additives exhibited very good flame retardant. The physical and mechanical characteristics of the coatings were studied in order to estimate any disadvantages due to the incorporation of the additives. It was discovered that the added substances did not impact the hardness, flexibility, and adhesion of the prepared coating films. The gloss of the paint formulation film was improved due to the incorporation of the aromatic ring into the formulation and the level of the oil percent.