基于{PMo_(12)O_(40)(VO)_(0.5)}的Cu(Ⅰ)配合物的合成及荧光性质研究

利用磷钼十二酸、偏钒酸铵、CuCl_2·2H_2O和3,3′,5,5′-四甲基-4,4′-联邻二氮杂茂(H_2X)在水热条件下反应,合成出了1个新的多酸基杂化化合物Cu_4(H_2X)_4[(PMo_(12)O_(40)(VO)_(0.5))].通过X射线单晶衍射、红外光谱和热重分析等测试手段对该化合物进行了结构表征.单晶结构解析表明该化合物为2D层状化合物,属于单斜晶系,C2/c空间群,晶胞参数a=2.637 6(5)nm,b=1.542 2(5)nm,c=2.057 0(5)nm,α=90.000(5)°,β=112.677(5)°,γ=90.000(5)°,V=7.720(3)nm~3,Z=4,R_1=0.061 5,wR_2=0.164 6.     

纳米MgO催化发光检测硫化氢

研究了硫化氢在纳米Mg O表面的催化发光现象,发现纳米Mg O对硫化氢具有较好的特异性,据此设计了硫化氢催化发光传感器。通过优化设计建立了一种快速检测硫化氢的新方法,线性范围为2.00~200ppm(r=0.999 3),检出限为0.8 ppm(信噪比S/N=3)。采用此传感器进行人工合成样品中硫化氢的加标回收分析,回收率为88.4%~97.2%。此传感器具有灵敏、快速、操作简便等优点,在硫化氢快速检测领域具有潜在应用前景。该文还探讨了硫化氢的催化发光反应机理。     

MOVPE生长GaN的表面反应机理

利用量子化学的 DFT 理论,对 MOVPE 生长 GaN 薄膜的表面初始反应机理进行研究。通过计算GaCH3和NH3在GaN(0001)-Ga面的4种吸附位的能量曲线发现,GaCH3在各吸附位的吸附能差值不大,因此容易在表面迁移;而NH3在各吸附位的吸附能差值较大,最稳定吸附位为Top位,迁移到其他位置需要克服较大能垒。在此基础上,提出了以NH3和 GaCH3为表面生长基元,在GaN(0001)-Ga面连续生长,最终形成环状核心的二维生长机理：在环状核心形成过程中,第1个GaN核生长需要3个NH3和1个GaCH3,可表示为Ga( NH2)3。第2个GaN核生长可利用已有的1个N作为配位原子,故只需2个NH3和1个GaCH3。2个GaN核可表示为( NH2)2 Ga-NH-Ga( NH2)2。第3个GaN核生长可利用已有的2个N作为配位原子,故只需要1个NH3和1个GaCH3。3个GaN核构成环状核心,可表示为Ga3( NH)3( NH2)3。后续的生长将重复第2个核和第3个核的生长过程,从而实现GaN薄膜的连续台阶生长。     

Nonpolar a-plane light-emitting diode with an in-situ SiNx interlayer on r-plane sapphire grown by metal-organic chemical vapour deposition

We report on the growth and fabrication of nonpolar a-plane light emitting diodes with an in-situ SiN_x interlayer grown between the undoped a-plane GaN buffer and Si-doped GaN layer. X-ray diffraction shows that the crystalline quality of the GaN buffer layer is greatly improved with the introduction of the SiN_x interlayer. The electrical properties are also improved. For example, electron mobility and sheet resistance are reduced from high resistance to 31.6 cm²/(V·s) and 460 Ω/口 respectively. Owing to the significant effect of the SiN_x interlayer, a-plane LEDs are realized. Electroluminescence of a nonpolar a-plane light-emitting diode with a wavelength of 488nm is demonstrated. The emission peak remains constant when the injection current increases to over 20 mA.     

GaN基p-i-n型雪崩探测器的制备与表征

制备和表征了p-i-n型的GaN基雪崩探测器.器件在-5V下的暗电流约为0.05 nA,-20 V下的暗电流小于0.5 nA.响应增益-偏压曲线显示,可重复的雪崩增益起始于80 V附近,在85 V左右增益达到最大为120,表明所制备的器件具有较好的质量.C-V测量用来确定载流子的分布和耗尽信息,结果显示,P型层在15 ...     

AlGaN-Based Solar-Blind Schottky Photodetectors Fabricated on AlN/Sapphire Template

We report AlGaN-based back-illuminated solar-blind Schottky-type ultraviolet photodetectors with the cutoff- wavelength from 280nm to 292nm without bias. The devices show low dark current of 2.1× 10^-6A/cm^2 at the reverse bias of 5 V. The specific detectivity D＊ is estimated to be 3.3 × 10^12cmHz^1/2 W^-1 . To guarantee the performance of the photodetectors, the optimization of AlGaN growth and annealing condition for Schottky contacts were performed. The results show that high-temperature annealing method for Ni/Pt Schottky contacts is effective for the reduction of leakage current.     

Optical Defect in GaN-Based Laser Diodes Detected by Cathodoluminescence

GaN-based laser diodes （LDs） with 399 nm wavelength are grown on sapphire substrates by metal organic chemical vapour deposition （MOCVD）. Electroluminescence spectra of the fabricated LDs show that the LDs from some grown wafers failed to emit laser. The SEM and XRD results show the similar surface morphology and interface qualities of multi quantum wells （MQWs） and super-lattices between LDs that succeed and fail to emit laser. However, the cathodoluminescence （CL） measurements reveal a kind of optical defect rather than structural defect in un-emitted LDs. Further depth-dependent CL imaging observation indicates that such optical defects originate from the MQWs to the surface of LDs as a non-irradiative recombination centre that should cause the failure of laser emitting of LDs.     

固态照明光源的基石--氮化镓基白光发光二极管

首先回顾了照明光源的简单历史 ,然后介绍了发光二极管 (LED)发展到大功率白光LED的历史 ,接着简述了国内外发展现状 ,主要技术路线及其特点 .最后阐述了作者在这方面的研究工作进展状况 ,对其发展趋势提出了一些看法 .     

大尺寸HVPE反应器寄生沉积的数值模拟研究

在氢化物气相外延(HVPE)生长GaN厚膜中,反应腔壁面总会产生大量的寄生沉积,严重影响薄膜生长速率及质量.本文针对自制的大尺寸垂直式HVPE反应器,通过数值模拟与实验对比,研究了反应腔壁面沉积以及GaN生长速率的分布规律,特别是寄生沉积分布与载气流量的关系.研究发现:在基准条件下,顶壁寄生沉积速率由中心向边缘逐渐降低,与实验结果吻合;侧壁沉积出现8个高寄生沉积区域,对应喷头边缘处排布的GaCl管,说明沉积主要取决于GaCl的浓度输运;模拟得出的石墨托表面生长速率低于实验速率,但趋势一致.保持其他条件不变,增大NH3管载气N2流量,顶壁和侧壁的寄生沉积速率及分布区域均随之增大,石墨托表面生长速率随之减小而均匀性却随之提高;增大GaCl管载气N2流量,顶壁和侧壁的寄生沉积速率及分布区域均随之减小,石墨托表面生长速率随之增大而均匀性却随之降低.研究结果为大尺寸HVPE反应器生长GaN的工艺优化提供了理论依据.     

Comparative Characterization of InGaN/GaN Multiple Quantum Wells by Transmission Electron Microscopy, X-Ray Diffraction and Rutherford Backscattering

The composition, elastic strain and structural defects of InCaN/CaN multiple quantum wells （MQWs） are comparatively investigated by using x-ray diffraction （XRD）, transmission electron microscopy and Rutherford backscattering/channelling. The InGaN well layers are fully strained on CaN, i.e. the degree of relaxation is zero. The multilayered structure has a clear defined periodic thickness and abrupt interfaces. The In composition is deduced by XRD simulation. We show how the periodic structure, the In composition, the strain status and the crystalline quality of the InGaN/GaN MQ, Ws can be determined and cross-checked by various techniques.