Cs/GaN(0001)吸附体系电子结构和光学性质研究

采用基于第一性原理的密度泛函理论平面波超软赝势方法计算了 1/4ML Cs原子吸附 (2 × 2) GaN(0001) 表面的吸附能、能带结构、电子态密度、电荷布居数、功函数和光学性质. 计算发现, 1/4ML Cs 原子在 GaN(0001) 表面最稳定吸附位为 N 桥位, 吸附后表面仍呈现为金属导电特性, Cs原子吸附GaN(0001)表面后主要与表面 Ga 原子发生作用, Cs6s 态电子向最表面 Ga 原子转移, 引起表面功函数下降. 研究光学性质发现, Cs 原子吸附 GaN(0001) 表面后, 介电函数虚部、吸收谱、反射谱向低能方向移动.     

温度对GaN(0001)表面生长吸附SrO、BaO和TiO_2影响的理论研究

采用基于第一性原理的从头计算分子动力学方法,模拟了300、400、500、600和700℃下SrO、BaO和TiO_2分子在GaN(0001)表面吸附的动力学过程,研究了温度对原子运动轨迹、吸附能、界面电荷分布、稳定吸附方位和扩散系数的影响.温度不同,O-Ga成键时间不同,SrO分子中的O原子与GaN基底成键的Ga原子不同; TiO_2分子中O原子与GaN表面Ga原子成键的顺序也不同.温度对SrO、BaO和TiO_2分子在GaN(0001)表面的最终吸附形态和吸附方位有显著的影响.温度对不同吸附体系吸附能的影响也不相同;小分子在GaN(0001)基片表面优先吸附的顺序依次为TiO_2、SrO和BaO分子.数据分析显示SrO和BaO分子的最优生长温度是600℃,TiO_2分子的最优生长温度是500℃.     

Ga2O3/GaN/蓝宝石模板上β-Ga2O3薄膜的生长

为获得高质量的β-Ga2O3薄膜,将c面蓝宝石上生长的GaN薄膜进行高温氧化制成了Ga2O3/GaN/蓝宝石模板,进而在模板上利用金属有机化学气相沉积(MOCVD)工艺进行了β-Ga2O3薄膜的同质外延。通过X射线衍射仪、原子力显微镜、场发射扫描电子显微镜等方法对样品的晶体结构、表面形貌等性质进行测试与分析。结果表明,该方法获得的β-Ga2O3薄膜晶体质量受GaN薄膜氧化效果与MOCVD工艺条件等因素影响较大。通过优化实验条件,得到了质量较高的β-Ga2O3薄膜。与蓝宝石上或GaN薄膜上异质外延得到的β-Ga2O3薄膜相比,薄膜的晶体质量明显提高。通过对比不同样品的晶体质量、表面形貌和制备过程,发现该方法成功地将β-Ga2O3薄膜在蓝宝石衬底或GaN/蓝宝石模板上异质外延转化为了Ga2O3/GaN/蓝宝石模板上的同质外延,有效地减小了β-Ga2O3薄膜和蓝宝石、GaN之间较大的晶格失配和热失配,有利于提高β-Ga2O3薄膜的晶体质量。     

TiO2分子在GaN(0001)表面吸附的理论研究

采用基于密度泛函理论的平面波超软赝势法,计算了TiO₂分子在GaN(0001)表面的吸附成键过程、吸附能量和吸附位置. 计算结果表明不同初始位置的TiO₂分子吸附后,Ti在fcc或hcp位置,两个O原子分别与表面两个Ga原子成键,Ga-O化学键表现出共价键特征,化学结合能达到7.932-7.943eV,O-O连线与GaN[1120]方向平行,与实验观测(100)[001] TiO₂//(0001)[1120]GaN一致. 通过动力学过程计算分析,TiO₂分子吸附过程经历了物理吸附、化学吸附与稳定态形成的过程,稳定吸附结构和优化结果一致. 关键词： GaN(0001)表面 2分子')" href="#">TiO₂分子 密度泛函理论 吸附     

GaN表面极性的光电子衍射研究

利用x射线光电子衍射的极角扫描模式,采集了GaN（0001）表面由(1010)和(1120)晶面产生的光电子衍射实验曲线,并运用光电子衍射的前向聚焦效应确定了GaN(0001)表面是Ga在最外层的极性面.利用与能量有关的光电子衍射即角分辨光电发射精细结构谱技术并结合多重散射团簇模型计算对GaN(0001)表面的极化性质进行了研究,进一步证实了GaN表面是Ga在最外层的极性面. 关键词： GaN 表面极性 光电子衍射     

GaN(0001)表面电子结构和光学性质的第一性原理研究

采用基于第一性原理的密度泛函理论平面波超软赝势方法计算了(2×2)GaN(0001)清洁表面的能带结构、态密度、表面能、功函数和光学性质.发现弛豫后GaN(0001)表面的能带结构发生较大变化,表面呈现金属导电特性,导带底附近存在明显的表面态,在偶极矩的作用下表面电荷发生转移,Ga端面为正极性表面;计算获得了GaN(0001)表面的表面能和功函数分别为2.1J.m^-2和4.2eV;比较分析了GaN(0001)表面和体相GaN的光学性质,发现两者存在较大差异.     

利用选择性外延法生长单芯片双波长白光InGaN/GaN多量子阱结构

为了制备单芯片无荧光粉白光InGaN/GaN多量子阱发光结构,利用选择性外延生长法在SiO2条纹掩膜板上生长出具有梯形形貌的GaN微面结构,并在该GaN微面结构上生长InGaN/GaN多量子阱结构,最终在单芯片上获得了双波长发光.结果表明:梯形GaN微面由(0001)和(11-22)面组成,两者的表面能和极性不同,并且在InGaN/GaN多量子阱生长过程中,In原子和Ga原子迁移速率不同,从而使得(0001)和(11-22)面上的多量子阱具有不同的发光波长;该性质可以使(11-22)面的微面量子阱发出蓝光(峰值波长为420nm),而(0001)面的量子阱发出黄光(峰值波长为525nm),最终形成双波长的复合白光外延结构.     

Nitrogen Adatom Diffusion on a Ga－Rich GaN （0001） Surface

The diffusion of N adatoms on a Ga-rich GaN(O001) surface has been studied using density-functional theory.The configuration of Ga adatoms on a Ga-rich GaN surface has been identified. The first adlayer Ga adatoms are on top of the terminating substrate Ga atoms, and the outmost adlayer Ga adatoms exist randomly at the T4 or H3 sites. A very different diffusivity of N adatoms on a Ga-rich GaN(0001) surface has been found. The excess Ga adatoms on a GaN(0001) surface reduce the diffusion barrier by 0.75eV and influence the migration path. It seems that bilayer Ga adatoms are helpful for N atom diffusion.     

Ba和Sr原子在ZnO(0001)表面吸附的密度泛函理论研究

我们采用密度泛函理论下的平面波赝势方法研究Ba和Sr原子在ZnO(0001)表面的吸附结构和性质,仔细研究了三个吸附位（T4, H3 and Top）。发现Ba和Sr吸附在表面的H3和T4位时,他们之间的结合能相差很小,且这两种金属更易于吸附在表面的T4位,我们把计算的结果与贵金属在ZnO(0001)表面的吸附行为及前人的实验结果进行了比较,理论上发现Ag和Au易于吸附在ZnO(0001)表面的H3位,而实验上观察到即使在很小吸附比的条件下ZnO(0001)表面上也能形成Cu的团簇结构,这主要是由于Cu和ZnO(0001)表面衬底强的相互作用所致。     

Ba和Sr原子在ZnO(0001)表面吸附的密度泛函理论研究

我们采用密度泛函理论下的平面波赝势方法研究Ba和Sr原子在ZnO(0001)表面的吸附结构和性质,仔细研究了三个吸附位（T4, H3 and Top）。发现Ba和Sr吸附在表面的H3和T4位时,他们之间的结合能相差很小,且这两种金属更易于吸附在表面的T4位,我们把计算的结果与贵金属在ZnO(0001)表面的吸附行为及前人的实验结果进行了比较,理论上发现Ag和Au易于吸附在ZnO(0001)表面的H3位,而实验上观察到即使在很小吸附比的条件下ZnO(0001)表面上也能形成Cu的团簇结构,这主要是由于Cu和ZnO(0001)表面衬底强的相互作用所致。     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.