纳米MgO催化发光检测硫化氢

研究了硫化氢在纳米Mg O表面的催化发光现象,发现纳米Mg O对硫化氢具有较好的特异性,据此设计了硫化氢催化发光传感器。通过优化设计建立了一种快速检测硫化氢的新方法,线性范围为2.00~200ppm(r=0.999 3),检出限为0.8 ppm(信噪比S/N=3)。采用此传感器进行人工合成样品中硫化氢的加标回收分析,回收率为88.4%~97.2%。此传感器具有灵敏、快速、操作简便等优点,在硫化氢快速检测领域具有潜在应用前景。该文还探讨了硫化氢的催化发光反应机理。

Detection of Hydrogen Sulfide Using a Cataluminescence Sensor Based on Nano-MgO

The cataluminescent(CTL) phenomenon in the reaction of hydrogen sulfide on nano-MgO surface was studied.It was found that nano-MgO showed a good specificity towards hydrogen sulfide,a CTL sensor for hydrogen sulfide was developed on the basis of this phenomenon,then a rapid method for the detection of hydrogen sulfide was proposed after optimal design.The linear range for this method was 2.00-200 ppm(r=0.999 3),and the detection limit was 0.8 ppm at a signal to noise ratio(S/N) of 3.The sensor was applied in the spiked analysis of the artificial samples containing hydrogen sulfide with the recoveries between 88.4% and 97.2%.With the advantages of sensitivity,rapidness and easy operation,the sensor showed an application potential in the rapid detection of hydrogen sulfide.The possible CTL reaction mechanism of hydrogen sulfide was also discussed.