Effects of the strain relaxation of an AlGaN barrier layer induced by various cap layers on the transport properties in AlGaN/GaN heterostructures

The strain relaxation of an AlGaN barrier layer may be influenced by a thin cap layer above, and affects the transport properties of AlGaN/GaN heterostructures. Compared with the slight strain relaxation found in AlGaN barrier layer without cap layer, it is found that a thin cap layer can induce considerable changes of strain state in the AlGaN barrier layer. The degree of relaxation of the AlGaN layer significantly influences the transport properties of the two-dimensional electron gas (2DEG) in AlGaN/GaN heterostructures. It is observed that electron mobility decreases with the increasing degree of relaxation of the AlGaN barrier, which is believed to be the main cause of the deterioration of crystalline quality and morphology on the AlGaN/GaN interface. On the other hand, both GaN and AlN cap layers lead to a decrease in 2DEG density. The reduction of 2DEG caused by the GaN cap layer may be attributed to the additional negative polarization charges formed at the interface between GaN and AlGaN, while the reduction of the piezoelectric effect in the AlGaN layer results in the decrease of 2DEG density in the case of AlN cap layer.     

Comparative study of different properties of GaN films grown on(0001) sapphire using high and low temperature AlN interlayers

Comparative study of high and low temperature AlN interlayers and their roles in the properties of GaN epilayers prepared by means of metal organic chemical vapour deposition on (0001) plane sapphire substrates is carried out by high resolution x-ray diffraction, photoluminescence and Raman spectroscopy. It is found that the crystalline quality of GaN epilayers is improved significantly by using the high temperature AlN interlayers, which prevent the threading dislocations from extending, especially for the edge type dislocation. The analysis results based on photoluminescence and Raman measurements demonstrate that there exist more compressive stress in GaN epilayers with high temperature AlN interlayers. The band edge emission energy increases from 3.423~eV to 3.438~eV and the frequency of Raman shift of $E_{2 }$(TO) moves from 571.3~cm$^{ - 1}$ to 572.9~cm$^{ - 1}$ when the temperature of AlN interlayers increases from 700~$^{\circ}$C to 1050~$^{\circ}$C. It is believed that the temperature of AlN interlayers effectively determines the size, the density and the coalescence rate of the islands, and the high temperature AlN interlayers provide large size and low density islands for GaN epilayer growth and the threading dislocations are bent and interactive easily. Due to the threading dislocation reduction in GaN epilayers with high temperature AlN interlayers, the approaches of strain relaxation reduce drastically, and thus the compressive stress in GaN epilayers with high temperature AlN interlayers is high compared with that in GaN epilayers with low temperature AlN interlayers.     

Analysis and finite element simulation of electromagnetic heating in the nitride MOCVD reactor

Electromagnetic field distribution in the vertical metal organic chemical vapour deposition (MOCVD) reactor is simulated by using the finite element method (FEM). The effects of alternating current frequency, intensity, coil turn number and the distance between the coil turns on the distribution of the Joule heat are analysed separately, and their relations to the value of Joule heat are also investigated. The temperature distribution on the susceptor is also obtained. It is observed that the results of the simulation are in good agreement with previous measurements.     

A two-dimensional fully analytical model with polarization effect for off-state channel potential and electric field distributions of GaN-based field-plated high electron mobility transistor

In this paper, we present a two-dimensional （2D） fully analytical model with consideration of polarization effect for the channel potential and electric field distributions of the gate field-plated high electron mobility transistor （FP-HEMT） on the basis of 2D Poisson＇s solution. The dependences of the channel potential and electric field distributions on drain bias, polarization charge density, FP structure parameters, A1GaN/GaN material parameters, etc. are investigated. A simple and convenient approach to designing high breakdown voltage FP-HEMTs is also proposed. The validity of this model is demonstrated by comparison with the numerical simulations with Silvaco-Atlas. The method in this paper can be extended to the development of other analytical models for different device structures, such as MIS-HEMTs, multiple-FP HETMs, slant-FP HEMTs, etc.     

Improved crystal quality of GaN film with the in-plane lattice-matched In_(0.17)Al_(0.83)N interlayer grown on sapphire substrate using pulsed metal organic chemical vapor deposition

We report on an improvement in the crystal quality of GaN film with an In0.17Al0.83N interlayer grown by pulsed metal–organic chemical vapor deposition, which is in-plane lattice-matched to GaN films. The indium composition of about 17% and the reductions of both screw and edge threading dislocations(TDs) in GaN film with the InAlN interlayer are estimated by high resolution X-ray diffraction. Transmission electron microscopy(TEM) measurements are employed to understand the mechanism of reduction in TD density. Raman and photoluminescence measurements indicate that the InAlN interlayer can improve the crystal quality of GaN film, and verify that there is no additional residual stress induced into the GaN film with InAlN interlayer. Atomic force microscopy measurement shows that the InAlN interlayer brings in a smooth surface morphology of GaN film. All the results show that the insertion of the InAlN interlayer is a convenient method to achieve excellent crystal quality in GaN epitaxy.     

Mechanism of improving forward and reverse blocking voltages in AlGaN/GaN HEMTs by using Schottky drain

In this paper, we demonstrate that a Schottky drain can improve the forward and reverse blocking voltages(BVs)simultaneously in AlGaN/GaN high-electron mobility transistors(HEMTs). The mechanism of improving the two BVs is investigated by analysing the leakage current components and by software simulation. The forward BV increases from72 V to 149 V due to the good Schottky contact morphology. During the reverse bias, the buffer leakage in the Ohmicdrain HEMT increases significantly with the increase of the negative drain bias. For the Schottky-drain HEMT, the buffer leakage is suppressed effectively by the formation of the depletion region at the drain terminal. As a result, the reverse BV is enhanced from-5 V to-49 V by using a Schottky drain. Experiments and the simulation indicate that a Schottky drain is desirable for power electronic applications.     

Effect of Si doping in wells of A1GaN/GaN superlattice on the characteristics of epitaxial layer

An A1GaN/GaN superlattice grown on the top of a GaN buffer induces the broadening of the full width at half maximum of （102） and （002） X-ray diffraction rocking curves. With an increase in the Si-doped concentration in the GaN wells, the full width at half maximum of the （102） rocking curves decreases, while that of the （002） rocking curves increases. A significant increase of the full width at the half maximum of the （002） rocking curves when the doping concentration reaches 2.5 × 10^19 cm-3 indicates the substantial increase of the inclined threading dislocation. High level doping in the A1GaN/GaN superlattice can greatly reduce the biaxial stress and optimize the surface roughness of the structures grown on the top of it.     

Depth-dependent mosaic tilt and twist in GaN epilayer:An approximate evaluation

An approach based on depth-sensitive skew-angle x-ray diffraction （SAXRD） is presented for approximately evalu- ating the depth-dependent mosaic tilt and twist in wurtzite c-plane GaN epilayers. It is found that （103） plane and （101） plane, among the lattice planes not perpendicular to the sample surface, are the best choices to measure the depth profiles of tilt and twist for a GaN epilayer with a thickness of less than 2 μm according to the diffraction geometry of SAXRD. As an illustration, the depth-sensitive （103）/（101） ω-scans of a 1.4-μm GaN film grown by metal-organic chemical vapor deposition on sapphire substrate are measured and analyzed to show the feasibility of this approach.     

Reverse blocking enhancement of drain field plate in Schottky-drain AlGaN/GaN high-electron mobility transistors

In this paper, we present the combination of drain field plate(FP) and Schottky drain to improve the reverse blocking capability, and investigate the reverse blocking enhancement of drain FP in Schottky-drain AlGaN/GaN high-electron mobility transistors(HEMTs). Drain FP and gate FP were employed in a two-dimensional simulation to improve the reverse blocking voltage(VRB) and the forward blocking voltage(VFB). The drain-FP length, the gate-FP length and the passivation layer thickness were optimized. VRBand VFBwere improved from-67 V and 134 V to-653 V and 868 V respectively after optimization. Simulation results suggest that the combination of drain FP and Schottky drain can enhance the reverse blocking capability significantly.     

晶格匹配InAlN/GaN和InAlN/AlN/GaN材料二维电子气输运特性研究

文章研究了InAlN/GaN和引入AlN界面插入层形成的InAlN/AlN/GaN材料的输运性质. 样品均在蓝宝石上以脉冲金属有机物化学气相淀积法生长,霍尔迁移率变温特性具有典型的二维电子气(2DEG)特征. 综合各种散射机理包括声学形变势散射、压电散射、极性光学声子散射、位错散射、合金无序散射和界面粗糙度散射,理论分析了温度对迁移率的影响,发现室温下两种材料中2DEG支配性的散射机理都是极性光学波散射和界面粗糙度散射;AlN插入层对InAlN/GaN材料迁移率的改善作用一方面是免除2DEG的合金无序散射,另外还显著改善异质界面,抑制了界面粗糙度散射. 考虑到2DEG密度也是影响其迁移率的重要因素,结合实验数据给出了晶格匹配InAlN/GaN和InAlN/AlN/GaN材料的2DEG迁移率随电子密度变化的理论上限. 关键词： InAlN/GaN 二维电子气 迁移率