Droop improvement in blue InGaN light-emitting diodes with GaN/InGaN superlattice barriers

GaN/InGaN superlattice barriers are used in InGaN-based light-emitting diodes （LEDs）. The electrostatic field in the quantum wells, electron hole wavefunction overlap, carrier concentration, spontaneous emission spectrum, light-current performance curve, and internal quantum efficiency are numerically investigated using the APSYS simulation software. It is found that the structure with GaN/InGaN superlattice barriers shows improved light output power, and lower current leakage and efficiency droop. According to our numerical simulation and analysis, these improvements in the electrical and optical characteristics are mainly attributed to the alleviation of the electrostatic field in the active region.     

Anomalous disorder-related phenomena in InGaN/GaN multiple quantum well heterosystems

The influences of InGaN/GaN multiple quantum well (MQW) heterostructures with InGaN/GaN and GaN barriers on carrier confinement were investigated. The degree of disordering over a broad range of temperatures from 20 to 300 K was considered. The optical and electrical properties were strongly influenced by structural and compositional disordering of the InGaN/GaN MQW heterostructures. To compare the degree of disordering we examined the temperature dependence of the luminescence spectra and electrical conductance contingent on the Berthelot-type mechanisms in the InGaN/GaN MQW heterostructures. We further considered carrier transport in the InGaN/GaN disordered systems, probability of carrier tunneling, and activation energy of the transport mechanism for devices with InGaN/GaN and GaN barriers. The optical properties of InGaN/GaN disordered heterosystems can be interpreted from the features of the absorption spectra. The anomalous temperature-dependent characteristics of the disordered InGaN/GaN MQW structures were attributable to the enhancement of the exciton confinement.     

引入n型InGaN/GaN超晶格层提高量子阱特性研究

利用金属有机物化学气相淀积技术在蓝宝石衬底上生长了InGaN/GaN量子阱结构. 研究了引入n型InGaN薄层或InGaN/GaN超晶格层的量子阱特性,结果表明通过引入n型InGaN薄层或InGaN/GaN超晶格层缓解了量子阱有源区中的应力,改善了多量子阱表面形貌,减少了V型缺陷密度,而且提高了多量子阱的光致发光强度,从而也改进了LED的发光效率. 关键词： InGaN/GaN多量子阱 原子力显微镜 X射线双晶衍射 光致发光     

垒掺In提高InGaN/GaN多量子阱发光特性

利用金属有机物化学气相淀积技术在蓝宝石衬底上生长InGaN/GaN多量子阱结构.对多量子阱垒层掺In和非掺In进行了比较研究，结果表明，垒掺In 的样品界面质量变差，但明显增加了光致发光谱的峰值强度和积分强度，带边峰与黄光峰强度之比增大，降低了表面粗糙度.利用这两种结构制备了相应的发光二极管(LED)样品.通过电荧光测量可知，垒掺In的LED比非掺In的LED有较高的发光强度和相对均匀的波长，这主要是由于垒掺In后降低了阱与垒之间晶格失配的应力，从而降低了极化电场，提高了辐射复合效率. 关键词： InGaN/GaN多量子阱 X射线双晶衍射 原子力显微镜 光致发光     

Two dimensional electron gas in a hybrid GaN/InGaN/ZnO heterostructure with ultrathin InGaN channel layer

We investigated the influence of an ultrathin InGaN channel layer on two-dimensional electron gas (2DEG) properties in a newly proposed hybrid GaN/In_xGa_1−xN/ZnO heterostructure using numerical methods. We found that 2DEG carriers were confined at InGaN/ZnO and GaN/InGaN interfaces. Our calculations show that the probability densities of 2DEG carriers at these interfaces are highly influenced by the In mole fraction of the InGaN channel layer. Therefore, 2DEG carrier confinement can be adjustable by using the In mole fraction of the InGaN channel layer. The influence of an ultrathin InGaN channel layer on 2DEG carrier mobility is also discussed. Usage of an ultrathin InGaN channel layer with a low indium mole fraction in these heterostructures can help to reduce the short-channel effects by improvements such as providing 2DEG with higher sheet carrier density which is close to the surface and has better carrier confinement.     

InGaN/GaN多量子阱蓝色发光二极管的实验与模拟分析

分别采用量子阱模型和量子点模型对蓝色InGaN/GaN多量子阱发光二极管电学和光学特性进行模拟,并和实验测量结果进行了比对,结果发现,量子点模型的引入,很好地解决了I-V和电致发光二方面的实验与理论模型间符合程度不好的问题.同时,在I-V曲线特性模拟中发现,在量子点理论模型的基础上,只有考虑到载流子的非平衡量子传输效应,才能得到和实验相接近的I-V曲线,揭示着在InGaN/GaN 多量子阱发光二极管电输运特性中,载流子的非 关键词： InGaN/GaN 发光二极管 数值模拟 量子点模型     

垒层厚度对InGaN/GaN多量子阱电注入发光性能的影响及机理

研究了不同垒厚对InGaN/GaN多量子阱电注入发光性能的影响及机理。实验发现,当GaN垒层的厚度从6 nm增大到24 nm时,垒厚的样品发光强度更强,而且当注入电流增加时,适当增加垒厚,可以更显著增加发光强度。进一步结合发光峰位和光谱宽度的研究表明,由于应力和极化效应的存在,当垒层厚度在6~24 nm范围内时,适当增加垒层厚度不仅会使得能带的倾斜加剧,减少电子泄露,而且也会增加InGaN阱层的局域态深度,从而改善量子阱的发光性能。     

Strain Effect on Photoluminescences from InGaN MQWs with Different Barriers Grown by MOCVD

InGaN/GaN MQWs, InGaN/AlGaN MQWs and InGaN/AlInGaN MQWs are grown on （0001） sapphire substrates by MOCVD. Membrane samples are fabricated by laser lift-off technology. The photoluminescence spec-ra of membranes show a blue shift of peak positions in InGaN/GaN MQWs, a red shift of peak positions in InGaN/AlGaN MQWs and no shift of peak positions in InGaN/AIlnGaN MQWs from those of samples with substrates. Different changes in Raman scattering spectra and HR-XRD （0002） profile of InGaN/AlInGaN MQWs, from those of InGaN/GaN MQWs and InGaN/AlGaN MQWs, are observed. The fact that the strain changes differently among InGaN MQWs with different barriers is confirmed. The AIlnGaN barrier could adjust the residual stress for the least strain-induced electric field in InGaN/AIlnGaN quantum wells.     

具有超晶格应力调制结构的绿光InGaN/GaN多量子阱的发光特性

研究了具有InGaN/GaN超晶格(SL)插入结构的绿光InGaN/GaN多量子阱(MQW)的发光特性。结构测试表明,SL插入结构并没有引起MQW中平均In组份的增加,而是改变了In组份的分布,形成了高In组份的量子点和低In组份量子阱。其电致发光(EL)谱和光致发光(PL)谱均出现了双发光峰。我们认为这两个 峰分别来自于量子点和量子阱,且存在着载流子从阱向点转移的输运机制。最后变温PL积分强度的Arrhenius 拟合表明,SL插入结构并没有在MQW中引入新的缺陷,使其发光效率下降。     

Electron probe microanalysis and local cathodoluminescence studies of multilayer heterostructures based on InGaN/GaN

This paper presents the results of the study on multilayer heterostructures based on InGaN/GaN grown by MOCVD. A new procedure to measure the composition and depth of InGaN quantum wells and AlGaN barrier layers is developed. Features of luminescence from different depths of the multilayer heterostructure are analyzed.     

高效InGaN/AlInGaN发光二极管的结构设计及其理论研究

利用Advanced Physical Models of Semiconductor Devices (APSYS)理论对比研究了InGaN/AlInGaN 和 InGaN/GaN多量子阱作为有源层的InGaN基发光二极管的结构和电学特性。与InGaN/GaN 基LED 中GaN作为垒层材料相比,在AlInGaN材料体系中,通过调节AlInGaN中Al和In的组分可以优化器件的性能。当InGaN阱层材料中In组分为8%时,可以实现无应力的In_0.08Ga_0.92N/AlInGaN基 LED。在这种无应力结构中可以进一步降低大功率LED的"效率下降"(Effciency droop)问题。理论模拟结果显示,四元系AlInGaN作为垒层可以进一步减少载流子泄露,增加空穴注入效率,减少极化场对器件性能的影响。在In_0.08Ga_0.92N /AlInGaN量子阱中的载流子浓度、有源层的辐射复合率、电流特性曲线和内量子效率等方面都优于InGaN/GaN基LED。无应变AlInGaN垒层代替传统的GaN垒层后,能够得到高效的发光二极管,并且大电流注入下的"效率滚降"问题得到改善。     

InGaN/GaN多量子阱的组分确定和晶格常数计算

采用金属有机化学气相沉积(MOCVD)技术以蓝宝石为衬底在n型GaN单晶层上生长了InGaN/GaN多量子阱结构外延薄膜，利用高分辨X射线衍射(HRXRD)，卢瑟福背散射/沟道(RBS/channeling)，以及光致发光(PL)技术对InGaN/GaN多量子阱结构薄膜分别进行了平均晶格常数计算、In原子替位率计算和In组分的定量分析.研究表明：InGaN/GaN多量子阱的水平和垂直方向平均晶格常数分别为a_epi=0.3195nm，c_epi=0.5198nm，In原子的替位率为99.3%，利用HRXRD和RBS/channeling两种分析技术计算In的组分分别是0.023和0.026，并与样品生长时设定的预期目标相符合，验证了两种实验方法的准确性；而用室温条件下的光致发光谱(PL)来计算InGaN/GaN多量子阱中In的组分是与HRXRD和RBS/channeling的实验结果相差很大，说明用PL测试In组分的方法是不适宜的. 关键词： InGaN/GaN多量子阱 高分辨X射线衍射 卢瑟福背散射/沟道 光致发光     

Correlation between pit formation and phase separation in thick InGaN film on a Si substrate

We demonstrate improved surface pit and phase separation in thick InGaN grown on a GaN/Si (111) substrate, using plasma-assisted molecular beam epitaxy with an indium modulation technique. The formation of surface pit and compositional inhomogeneity in the InGaN epilayer are investigated using atomic force microscopy, scanning electron microscopy and temperature-dependent photoluminescence. Indium elemental mapping directly reveals that poor compositional homogeneity occurs near the pits. The indium-modulation epitaxy of InGaN minimizes the surface indium segregation, leading to the reduction in pit density and size. The phase separation in InGaN with a higher pit density is significantly suppressed, suggesting that the pit formation and the phase separation are correlated. We propose an indium migration model for the correlation between surface pit and phase separation in InGaN.     

Performance improvement of blue InGaN light-emitting diodes with a specially designed n-AIGaN hole blocking layer

Blue InGaN light-emitting diodes （LEDs） with a conventional electron blocking layer （EBL）, a common n-A1GaN hole blocking layer （HBL）, and an n-A1GaN HBL with gradual A1 composition are investigated numerically, which involves analyses of the carrier concentration in the active region, energy band diagram, electrostatic field, and internal quantum efficiency （IQE）. The results indicate that LEDs with an n-AIGaN HBL with gradual AI composition exhibit better hole injection efficiency, lower electron leakage, and a smaller electrostatic field in the active region than LEDs with a conven tional p-A1GaN EBL or a common n-A1GaN HBL. Meanwhile, the efficiency droop is alleviated when an n-A1GaN HBL with gradual A1 composition is used.     

Growth and characterization of InGaN nanodots hybrid with InGaN/GaN quantum wells

Uniform InGaN nanodots were successfully grown on SiO₂ pretreated GaN surface. It was found that the InGaN nanodots were 20?nm in diameter and 5?nm in height, approximately. After the growth of two periods of InGaN/GaN quantum wells on the surface of InGaN nanodots, nanodot structure still formed in the InGaN well layer caused by the enhanced phase separation phenomenon. Dual-color emissions with different behavior were observed from photoluminescence (PL) spectrum of InGaN nanodots hybrid with InGaN/GaN quantum wells. A significant blueshift and a linewidth broadening were measured for the low-energy peak as the increase of PL excitation power, while a slight blueshift and a linewidth narrowing occurred for the high-energy peak. Accordingly, these two peaks were assigned to be from the In-rich nanodots and quantized state transition from the InGaN/GaN quantum wells with indium content, respectively.     

Evaluation of polarization field in InGaN/GaN multiple quantum well structures by using electroluminescence spectra shift

In order to investigate the inherent polarization intensity in InGaN/GaN multiple quantum well(MQW) structures,the electroluminescence(EL) spectra of three samples with different GaN barrier thicknesses of 21.3 nm, 11.4 nm, and 6.5 nm are experimentally studied. All of the EL spectra present a similar blue-shift under the low-level current injection,and then turns to a red-shift tendency when the current increases to a specific value, which is defined as the turning point.The value of this turning point differs from one another for the three InGaN/GaN MQW samples. Sample A, which has the GaN barrier thickness of 21.3 nm, shows the highest current injection level at the turning point as well as the largest value of blue-shift. It indicates that sample A has the maximum intensity of the polarization field. The red-shift of the EL spectra results from the vertical electron leakage in InGaN/GaN MQWs and the corresponding self-heating effect under the high-level current injection. As a result, it is an effective approach to evaluate the polarization field in the InGaN/GaN MQW structures by using the injection current level at the turning point and the blue-shift of the EL spectra profiles.     

High power and high reliability GaN/InGaN flip-chip light-emitting diodes

High-power and high-reliability GaN/InGaN flip-chip light-emitting diodes (FCLEDs) have been demonstrated by employing a flip-chip design, and its fabrication process is developed. FCLED is composed of a LED die and a submount which is integrated with circuits to protect the LED from electrostatic discharge (ESD) damage. The LED die is flip-chip soldered to the submount, and light is extracted through the transparent sapphire substrate instead of an absorbing Ni/Au contact layer as in conventional GaN/InGaN LED epitaxial designs. The optical and electrical characteristics of the FCLED are presented. According to ESD IEC61000-4-2 standard (human body model), the FCLEDs tolerated at least 10\,kV ESD shock have ten times more capacity than conventional GaN/InGaN LEDs. It is shown that the light output from the FCLEDs at forward current 350mA with a forward voltage of 3.3\,V is 144.68\,mW, and 236.59\,mW at 1.0\,A of forward current. With employing an optimized contact scheme the FCLEDs can easily operate up to 1.0\,A without significant power degradation or failure. The life test of FCLEDs is performed at forward current of 200\,mA at room temperature. The degradation of the light output power is no more than 9\% after 1010.75\,h of life test, indicating the excellent reliability. FCLEDs can be used in practice where high power and high reliability are necessary, and allow designs with a reduced number of LEDs.     

Effects of InGaN barriers with low indium content on internal quantum efficiency of blue InGaN multiple quantum wells

Blue In_0.2Ga_0.8N multiple quantum wells (MQWs) with In_xGa_{1 - x}N (x=0.01-0.04) barriers are grown by metal organic vapour phase epitaxy. The internal quantum efficiencies (IQEs) of these MQWs are studied in a way of temperature-dependent photoluminescence spectra. Furthermore, a 2-channel Arrhenius model is used to analyse the nonradiative recombination centres (NRCs). It is found that by adopting the InGaN barrier beneath the lowest well, it is possible to reduce the strain hence the NRCs in InGaN MQWs. By optimizing the thickness and the indium content of the InGaN barriers, the IQEs of InGaN/InGaN MQWs can be increased by about 2.5 times compared with conventional InGaN/GaN MQWs. On the other hand, the incorporation of indium atoms into the intermediate barriers between adjacent wells does not improve IQE obviously. In addition, the indium content of the intermediate barriers should match with that of the lowest barrier to avoid relaxation.     

利用选择性外延法生长单芯片双波长白光InGaN/GaN多量子阱结构

为了制备单芯片无荧光粉白光InGaN/GaN多量子阱发光结构,利用选择性外延生长法在SiO2条纹掩膜板上生长出具有梯形形貌的GaN微面结构,并在该GaN微面结构上生长InGaN/GaN多量子阱结构,最终在单芯片上获得了双波长发光.结果表明:梯形GaN微面由(0001)和(11-22)面组成,两者的表面能和极性不同,并且在InGaN/GaN多量子阱生长过程中,In原子和Ga原子迁移速率不同,从而使得(0001)和(11-22)面上的多量子阱具有不同的发光波长;该性质可以使(11-22)面的微面量子阱发出蓝光(峰值波长为420nm),而(0001)面的量子阱发出黄光(峰值波长为525nm),最终形成双波长的复合白光外延结构.     

Advantages of InGaN/GaN multiple quantum well solar cells with stepped-thickness quantum wells

InGaN/GaN multiple quantum well (MQW) solar cells with stepped-thickness quantum wells (SQW) are designed and grown by metal-organic chemical vapor deposition. The stepped-thickness quantum wells structure, in which the well thickness becomes smaller and smaller along the growth direction, reveals better crystalline quality and better spectral overlap with the solar spectrum. Consequently, the short-circuit current density (Jsc) and conversion efficiency of the solar cell are enhanced by 27.12% and 56.41% compared with the conventional structure under illumination of AM1.5G (100 mW/cm2). In addition, approaches to further promote the performance of InGaN/GaN multiple quantum well solar cells are discussed and presented.