热致晶化高反射率SbOx薄膜的结构分析和光学性质

利用直流磁控反应溅射法制备了SbOx薄膜,利用X射线衍射分析仪和光谱仪分别研究了这种薄膜热致晶化的微观结构和光学性质的变化,并通过非晶态薄膜粉末的示差扫描量热实验测出不同加热速度条件下结晶峰温度,研究了这种薄膜的结晶动力学。发现沉积态SbOx薄膜为非晶态,非晶态SbOx薄膜在热致晶化过程中发生了两种变化,分别对应为较低温度下Sb晶体和较高温度下立方Sb2O3相的生成。退火后晶态薄膜中出现了单质Sb和Sb2O3,300℃退火后Sb2O3相含量最大。晶态薄膜的反射率均高于沉积态,在晶态薄膜中200℃退火的薄膜反射率最大。     

新型AgInSbTe相变薄膜的光学及记录性能

利用直流磁控溅射法制备了一种新型AgInSbTe相变薄膜。示差扫描量热(DSC)实验测定的结晶峰温度为193．92℃。X射线衍射(XRD)表明未经热处理的沉积态薄膜是非晶态,而经过200℃热处理,X射线衍射图出现衍射峰,薄膜从非晶态转变到晶态。同时,研究了晶态和非晶态相变薄膜的吸收率、透射率和反射率随波长的变化。测定了650nm激光作用下的相变薄膜的记录性能,分析了记录功率、记录脉宽对薄膜反射率衬比度的影响,在同一记录脉宽条件下,记录功率越大,反射率衬比度也越大;在同一记录功率条件下,随记录脉宽的增加,反射率衬比度也增大。结果表明,新型AgInSbTe相变薄膜在激光作用下具有较高的反射率衬比度,可获得良好的记录性能。     

钛酸锶钡薄膜的室温光学性能研究

采用溶胶-凝胶法制备了(Ba0.75Sr0.25)TiO3薄膜,研究了不同退火温度下样品的物相结构、薄膜的光致发光性能和光学透过率。结果表明:室温下非晶钛酸锶钡薄膜在蓝光激发下具有明显的发光现象,发光波长范围是500～650 nm,峰值在525 nm附近。延长非晶态薄膜的退火时间能够显著提高样品的发光强度,且发光强度随薄膜厚度增加而增大。晶态薄膜有微弱的发光现象。透射谱测试结果表明,钛酸锶钡薄膜在可见光范围内具有良好的光学透过率。     

氮掺杂Ge2Sb2Te5相变存储器的多态存储功能

通过反应溅射的方法,制备了N掺杂的Ge2Sb2Te5(N-GST)薄膜,用作相变存储器的存储介质.研究表明,掺杂的N以GeN的形式存在,不仅束缚了Ge2Sb2Te5 (GST)晶粒的长大也提高了GST的晶化温度和相变温度.利用N-GST薄膜的非晶态、晶态面心立方相和晶态六方相的电阻率差异,能够在同一存储单元中存储三个状态,实现相变存储器的多态存储功能.     

磁控溅射法制备的高反Ag5In5Te47Sb33相变薄膜的光谱性质及短波长 …

研究了磁控溅射制备的Ａｇ５Ｉｎ５Ｔｅ４７Ｓｂ３３相变薄膜的光谱及短波长静态记录性能，研究结果表明，晶态薄膜反射率较高，并在６００～９００ｎｍ波长范围内，晶态与非晶态的反射率和折射率相差很大，在ＣＤ－Ｅ系统的工作波长７８０ｎｍ处，晶态反射率高达５０％，光学常数为５．３４－１．０ｉ；非晶态反射率为２３％，光学常数为２．５－１．０３ｉ，从这一角讲，Ａｇ５Ｉｎ５Ｔｅ４７Ｓｂ３３相变薄膜适于做ＣＤ－Ｅ系统的     

纳秒单脉冲激光诱导AgInSbTe薄膜的相变特性

利用磁控溅射法在K9玻璃基底上制备了Ag8In14Sb55Te23(AIST)纳米薄膜,并利用激光抽运-探测技术测量了薄膜的时间分辨反射率变化特性。研究结果表明,在合适能量密度的单脉冲纳秒激光脉冲作用下,AIST薄膜可以快速从沉积非晶态转化为晶态结构,晶化过程包含中间熔化态。在较低能量密度范围内,反射率变化量和晶化时间都随能量密度变化呈线性增加趋势。     

退火对磁控溅射HfSi_xO_y薄膜光学性质的影响

采用射频反应磁控溅射方法在硅衬底制备了HfSixOy薄膜,用X射线光电子能谱(XPS)分析了HfSixOy薄膜的成分,用X射线衍射(XRD)检测了薄膜的结构,并用椭圆偏振光谱仪研究了退火处理对薄膜光学性质的影响。XRD谱显示,HfSixOy薄膜经700℃高温退火处理后仍为非晶态,而在900℃高温退火处理后出现晶化。采用Tauc-Lorentz(TL)色散模型对测试得到的曲线进行拟合并分析得出薄膜的光学常数,结果表明,薄膜的折射率随退火温度的升高而增加,而消光系数随退火温度的升高呈降低趋势。薄膜的光学带隙随着退火温度的升高增加,采用外推法得到薄膜沉积态和经500℃,700℃,900℃退火后的带隙分别为5.62,5.65,5.68,5.98eV。     

Ge2 Sb2 Te5相变薄膜光学及擦除性能研究

利用蓝绿激光对非晶态Ge2Sb2Te5 相变薄膜进行擦除性能的研究,分别用1000 ns,500 ns,100 ns,60 ns脉宽的蓝绿激光进行实验.结果表明,一定脉宽下,反射率对比度随擦除功率的增加而增大.并且,在1000 ns,500 ns,100 ns,60 ns的激光作用时间范围内,非晶态薄膜均可转变成晶态.对于脉宽为60 ns的蓝绿激光,擦除功率大于4.49 mW以后,薄膜的反射率对比度高于15％,这表明Ge2Sb2Te5相变薄膜在短脉宽、低擦除功率条件下,可具有较高的晶化速度.同时,分析了非晶态和晶态Ge2Sb2Te5相变薄膜的光谱特性,对比研究了780 nm,650 nm,514 nm和405 nm波长处的反射率和反射率对比度,提出了Ge2Sb2Te5相变薄膜用于蓝光光盘的改进方法.     

磁控溅射法制备的高反Ag_5In_5Te_(47)Sb_(33)相变薄膜的光谱性质及短波长静态记录性能

研究了磁控溅射制备的Ａｇ５Ｉｎ５Ｔｅ４７Ｓｂ３３相变薄膜的光谱及短波长静态记录性能。研究结果表明，晶态薄膜反射率较高，并在６００～９００ｎｍ波长范围内，晶态与非晶态的反射率和折射率相差很大。在ＣＤ－Ｅ系统的工作波长７８０ｎｍ处，晶态反射率高达５０％，光学常数为５．３４－１．０ｉ；非晶态反射率为２３％，光学常数为２．５－１．０３ｉ。从这一角度讲，Ａｇ５Ｉｎ５Ｔｅ４７Ｓｂ３３相变薄膜适于做ＣＤ－Ｅ系统的记录介质。另外，采用波长为５１４．４ｎｍ的短波长光学静态记录测试仪对Ａｇ５Ｉｎ５Ｔｅ４７Ｓｂ３３薄膜的记录性能进行了测试，结果表明，这种薄膜短波长记录性能较好，它在较低功率和短脉宽的激光束作用下就可得到较高的反射率对比度。     

Pulsed Laser Deposition ZnS Buffer Layers for CIGS Solar Cells

采用脉冲激光沉积(PLD)技术,在20、200、400和600 oC下制备出了高质量的ZnS薄膜．XRD分析结果表明,PLD法制备的ZnS多晶薄膜为立方闪锌矿结构而并非Murali报道的六方的纤锌矿结构,并沿(111)方向择优取向生长．Raman光谱进一步证明了在350 cm-1出现了立方相ZnS薄膜的A1振动模式．通过ZnS薄膜的SEM平面和断面图可观察到采用PLD技术生长出了非常密实、光滑、均匀的薄膜．PLD生长的ZnS薄膜的颗粒远小于化学浴沉积的CdS颗粒,这也是影响其电池效率的主要原因．XRF化学组成分析结果表明ZnS薄膜符合化学计量比,但略微富S．最后通过光吸收谱测得不同温度下的ZnS薄膜的光学带隙在3.2～3.7 eV,并随薄膜沉积温度的升高,光学带隙反而增加．采用宽带隙的ZnS缓冲层材料,与CdS(2.4 eV)相比,可以增加电池蓝波段的响应．     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.