Speckle noise reduction in digital holography with spatial light modulator and nonlocal means algorithm

An integrated method based on optical and digital image processing is presented to suppress speckle in digital holography. A spatial light modulator is adopted to introduce random phases to the illuminating beam. Multiple holograms are reconstructed and superimposed, and the intensity is averaged to smooth the noise. The adaptive algorithm based on the nonlocal means is designed to further suppress the speckle. The presented method is compared with other methods reduction is improved, and the proposed method is effective The experimental results show that speckle and feasible.     

Improvement of speckle noise suppression in digital holography by rotating linear polarization state

An improved polarization recording approach to reduce speckle noise in digital holography is proposed. Multiple off-axis holograms are obtained by rotating the linear polarization state of both illumination and reference wave simultaneously. By averaging the intensity fields, the speckle noise in the reconstructed images is well suppressed. Statistical evaluation of the experimental results shows the effectiveness and improvement of the proposed method.     

Speckle noise reduction in digital holography by use of multiple polarization holograms

A novel speckle reduction technique for digital holography is proposed. Multiple off-axis holograms are recorded using a circularly polarized illumination beam and a rotating linearly polarized reference beam. The speckle noise in the reconstructed images is suppressed by averaging these fields. We demonstrate the effectiveness of this technique experimentally and conduct additional statistical evaluation.     

基于多角度无透镜傅里叶变换数字全息的散斑噪声抑制成像研究

在数字全息成像中,散斑噪声严重影响了再现像的信噪比和成像分辨率,因此为了提高数字全息成像质量,迫切需要抑制再现像的散斑噪声.分析并给出了矩形散射光斑的强度协方差,定量计算了特定实验条件下产生退相关散斑图样的最小角度差.结合透镜的性质设计并搭建了多角度无透镜傅里叶变换数字全息成像系统,利用光纤端面在透镜焦平面的二维机械移动代替传统反射镜的旋转,使照明光束在不改变照明位置和大小的同时,可任意改变光束方向.移动光纤端面使多角度照明满足最小角度差,获取了81幅数字全息图.利用单次快速傅里叶逆变换实现数值再现,对多幅再现像的强度像求平均,实验结果表明散斑对比度降低为单幅再现像的14.6%,使图像信噪比提高了6.9倍.该抑制散斑的多角度数字全息成像方法有效的抑制了散斑噪声,且成像光路结构简单,可操作性强.     

Study on the reduction of speckle noise in the reconstructed image of digital hologram

As one of the most important 3-D display technique, reduction of speckle noise in the reconstructed image of digital holography should be grounded on the digital hologram itself. Based on the whole process of the recording and reconstruction of digital holography, the optical distributions of recorded object and reconstructed image of digital holography have been studied. It has been proposed that the root formation cause of speckle noise in its reconstructed image is the speckle noise formed on the recorded object surface when illuminated by coherent light because of its optical roughness. A novel approach has been presented to reduce speckle noise in digital holography by changing the interference structure of hologram itself. First, by reducing the speckle noise in the reconstructed image, the distribution of ideal reconstruction light with reduced speckle noise is acquired. Then in turn, taking the ideal reconstruction light with reduced speckle noise as ideal object light, a new hologram can be rebuilt, which can reconstruct the ideal object light. The experimental results are given to confirm the proposed method. Therefore, it offers a brand-new thought and practical way to reduce the speckle noise in the reconstructed image of digital holography.     

基于旋转照明光的数字全息相干噪声抑制

提出一种数字全息相干噪声抑制方法。首先在照明光方位角给定的前提下,通过在极向平面内连续旋转照明光,实现在多角度照明条件下记录离轴数字全息图。然后对所获得的全息图分别重构,同时利用倾斜相差补偿算法和数字图像自相关配准方法分别补偿再现像的相位倾斜及横向偏移。最后将重构像进行非相干叠加,从而有效抑制再现像的相干噪声。实验结果及相关统计评价数据皆验证了该方法的有效性。     

Improvement of signal-to-noise ratio in digital holography using wavelet transform

The basic problem in optical and digital holography is the presence of speckle noise in the reconstruction process, which reduces the signal-to-noise ratio (SNR). The presence of speckle noise is serious drawback in optical and digital holography since it substantially reduces the SNR in the reconstructed image. In this paper, we present wavelet filtering to improve SNR in the reconstructed images from digital holograms. Experimental results are presented.     

Quantitative assessment of lateral resolution improvement in digital holography

Controllable experimental features such as wavelength, camera’s specifications and reconstruction distance, determine the theoretical limit for lateral resolution in digital holography; however, due to the speckle noise associated to any coherent imaging system it is not possible to reach this theoretical limit. In this paper, a quantitative study the lateral resolution for digital holography under the effect the speckle noise is carried out. It is shown that by reducing the contrast of the speckle noise the resolution capabilities of digital holography are improved; the signal-to-noise ratio of the reconstructed holograms is the metric use to quantitatively assess the reached resolution in the holographic experiments.     

Speckle reduction by selective spatial-domain mask in digital holography

An improved method of using a selective spatial-domain mask to reduce speckle noise in digital holography is proposed.The sub-holograms are obtained from the original hologram filtered by the binary masks including a shifting aperture for being reconstructed. Normally, the speckle patterns of these sub-reconstructed images are different. The speckle intensity of the final reconstructed image is suppressed by averaging the favorable sub-reconstructed images which are selected based on the most optimal pixel intensity sub-range in the sub-holograms. Compared with the conventional spatial-domain mask method, the proposed method not only reduces the speckle noise more effectively with fewer sub-reconstructed images,but also reduces the redundant information used in the reconstruction process.     

长工作距离显微成像数字全息合成孔径方法(英文)

提出了一种用于长工作距离下显微成像的数字全息合成孔径方法。首先,在不同斜入射照明条件下记录多幅包含不同物光频谱范围的数字全息图。然后,利用每一幅全息图通过数字方法重构并放大物体强度像。最后,通过非相干叠加这些强度像得到分辨力提高且散斑噪声减小的合成物体强度像。理论分析和实验结果表明,此方法可应用于长工作距离下的原位显微观测。     

物光复合调制的数字全息散斑去噪方法

为了克服在数字全息术中激光源高相干度造成的散斑噪声降低成像质量问题,论文提出将石英退偏器与电控液晶散射片相结合用于数字全息术中。通过在物光路中加入一个石英退偏器,利用退偏器的退偏性能使物光光路中的线偏光变成随机偏振光,降低与参考光的相干程度,实现对散斑噪声的抑制;通过给液晶散射片外加电场可以引起液晶分子的运动和光轴取向改变,调整液晶驱动电压大小来改变入射光的不同散射效果,有效地降低了光源的相干性;分别将单独采用石英退偏器和电控液晶散射片的重建图像与组合装置的重建图像进行对比分析,通过实验验证了所提方法的有效性。实验结果表明：两种实验对象在组合装置下的重建像峰值信噪比分别达到16.91和18.30,结构相似度为0.47和0.43,等效视数较原始重建像提高了42%和30%,散斑指数为1.52和1.29。论文提出的方法可较好地去除散斑噪声,保留更多的图像细节部分。     

Increment of lateral resolution in digital holography by speckle noise removal

Experimental features such as wavelength, camera specifications and reconstruction distance determine the theoretical limit for lateral resolution in digital holography. However, the actual experimental resolution limit is about 50% below such theoretical limit due to the high-contrast speckle noise presented in the reconstructed holograms. Recently, a technique has been introduced to reduce the contrast of speckle noise that is based on the superposition of uncorrelated hologram reconstructions of the same static object [5] (Garcia-Sucerquia et al., 2006). By this approach of reducing the contrast of the speckle noise, it is experimentally shown that an improvement of the order of 50% can be reached when 100 reconstructed images are superimposed.     

基于数学形态学的数字全息再现像融合方法

针对数字全息中不同再现距离获得的携带不同聚焦信息的再现像, 提出了一种基于数学形态学的多聚焦再现像融合方法, 以有效扩展成像景深。首先通过小波-Controulet变换获得源图像的高频和低频分量;然后, 针对数字全息中含散斑噪声的特点, 对高频分量采用基于数学形态学区域能量的方法进行融合, 对低频分量采用加权对比度法进行融合;最后, 将融合系数反变换得到融合图像。通过对算法的有效性分析和实验验证, 将本文提出的方法与不加入数学形态学的融合方法进行了对比研究。结果表明, 基于数学形态学的融合方法能充分抑制散斑噪声的影响, 保留更多细节信息, 有效扩展了成像景深范围达11.5 cm。其中, 对于表面粗糙且信息量较少的骰子, 基于数学形态学方法的空间梯度算子提高了11.8%, 熵值提高了2.7%;对于表面光滑且信息量较多的硬币, 其空间梯度算子提高了13.6%, 熵值提高了2.8%。     

Reduction of speckle noise in digital holography by using digital image processing

A fundamental problem in optical and digital holography is the presence of speckle noise in the reconstruction process. Many approaches have been carried out in order to overcome such a problem ranging from modifying the spatial coherence of the illumination (optical techniques) to image processing techniques (digital techniques). This work shows the merged use of digital image processing techniques in order to reduce the speckle noise in digital reconstruction of optically recorded Fresnel's holograms. The proposed filtering techniques are illustrated with experimental results.     

Reduction of speckle noise in the reconstructed image of digital holography

Based on the whole process of recording and reconstruction of digital holography, we study the formation causes of speckle noise in the reconstructed image and its characteristics. And we reach the conclusions that the little hologram aperture diffraction aggravates the speckle noise and the speckle noise in the reconstructed image is a kind of multiplicative noise. Serving as the basis of these features, we propose the reduction technique for speckle noise. Firstly, we set an appropriate aperture function matching the recording parameter and an aperture size of hologram and deconvolve the reconstructed image of the hologram with it. Secondly, we converted the multiplicative noise into additive noise by means of homomorphic transform and realize the separation of signal and noise. Thirdly, we applied the Wiener filtering to reduce the additive noise. Finally, we carried out the inverse transformation. The proposed reduction technique is illustrated with experimental results. Therefore, the paper offers a brand-new thought and practical way of reducing the speckle noise in the reconstructed image of digital holography.     

Speckle noise reduction by division and digital processing of a hologram

One of the common problems in classical and digital holography is presence of speckle in reconstructed images. Some methods have been predicted for speckle reduction. Speckle has a statistical distribution in size and intensity. Thus complete elimination of them is impossible. But, one can use this statistical characters to reduce its effects.In this paper a method is proposed for reduction of speckle effect by recording a hologram and then dividing it to several sub-holograms. Each sub-hologram is used to produce an image. Final image is constructed by superposition of these images. The final image has a smaller amount of speckle noise. Experimental results verify effectiveness of this technique.     

Automatic focusing in digital holography and its application to stretched holograms

The searching and recovering of the correct reconstruction distance in digital holography (DH) can be a cumbersome and subjective procedure. Here we report on an algorithm for automatically estimating the in-focus image and recovering the correct reconstruction distance for speckle holograms. We have tested the approach in determining the reconstruction distances of stretched digital holograms. Stretching a hologram with a variable elongation parameter makes it possible to change the in-focus distance of the reconstructed image. In this way, the proposed algorithm can be verified at different distances by dispensing the recording of different holograms. Experimental results are shown with the aim of demonstrating the usefulness of the proposed method, and a comparative analysis has been performed with respect to other existing algorithms developed for DH.     

The influence of hologram aperture on speckle noise in the reconstructed image of digital holography and its reduction

Based on the whole process of the recording and reconstruction of digital holography, we study the formation cause of speckle noise in its reconstructed image and acquire the conclusion that the small size of hologram aperture diffraction aggravates the speckle noise of reconstructed image and the speckle noise has been one of primary noise sources in the reconstruction process. In order to reduce the speckle noise resulting from little hologram aperture diffraction, we set an appropriate aperture function matching the recording parameter and aperture size of hologram and deconvolve the reconstructed image with it. The validity has been proved in theory and experiment. Therefore, it offers a brand-new thought and practical way to reduce the speckle noise in the reconstructed image of digital holography.     

一种在二步相移数字全息中实现准确相移的方法

相移数字全息中的相移准确性决定了重建结果的质量,本文提出了在二步相移数字全息中实现准确相移的方法.该方法使用数字电压源开环控制普通的压电陶瓷微位移器,通过连续以微小的间隔来改变施加在压电陶瓷微位移器上的电压,可以获得一系列对应于不同相移角的全息图像,进而可以利用这些全息图像重建出来物光波在全息面上的强度分布.实验中采用已被CCD直接记录的物光波在全息面上的强度分布作为标准来评价前面重建结果的质量,计算了这些重建结果和评价标准之间的相关系数,结果表明相关系数达到最大时对应的全息图具有准确的相移角π/2.实验中比较了使用所确定准确相移角和理论相移角分别重建出来物光波的质量,计算机模拟和实验的结果证实了该方法的有效性.     

基于两步正交相移干涉的振幅图像光学加密技术

提出一种基于两步正交相移干涉的光学图像加密技术.这种相移干涉数字全息只要记录两幅干涉图,不需要记录物光波和参考光波的强度信息,就可以再现没有零级像和共轭像的再现像.物光波对应的光路经过两次菲涅尔变换,并结合双随机相位编码.参考光分别引入0和π/2相位,用数字化记录介质记录两幅数字全息图作为加密图像.解密时只要获得正确的密钥,经过简单的计算就可以重建清晰的原始图像.模拟实验验证了它的可行性和有效性,分析了抗裁剪和噪音的鲁棒性.