硅铝催化剂催化有机溶剂木质素的解聚

E cient conversion of lignin to fine chemicals and biofuel become more and more attractive in biorefinery. In this work, we used a series of silica-alumina catalysts (i.e., SiO₂-Al₂O₃, HY, Hβ, and HZSM-5) to degrade lignin into arenes and phenols. The relationship between the catalyst structure and lignin depolymerization performance was investigated. The results showed that both acidity and pore size of the catalyst could in uence the conversion of lignin. In the volatilizable product, phenols were identified as the main phenolic monomers via gas chromatography-mass spectrometer. SiO₂-Al₂O₃ was the most effcient catalyst, giving 90.96% degree of conversion, 12.91% yield of phenols, and 2.41% yield of arenes in ethanol at 280℃ for 4 h. The Fourier transform infrared spectroscopy and ¹H nuclear magnetic resonance spectroscopy analysis demonstrated that deoxygenation and alkylation occurred in this process. The effect of solvents was also investigated and the results showed that ethanol was the most effcient solvent.     

活性炭负载Pt/Fe3O4催化剂及其选择性转移加氢肉桂醛的催化性能

A variety of spherical and structured activated charcoal supported Pt/Fe₃O₄ composites with an average particle size of ～100 nm have been synthesized by a self-assembly method using the difference of reduction potential between Pt (IV) and Fe (Ⅱ) precursors as driving force. The formed Fe₃O₄ nanoparticles (NPs) effectively prevent the aggregation of Pt nanocrystallites and promote the dispersion of Pt NPs on the surface of catalyst, which will be favorable for the exposure of Pt active sites for high-efficient adsorption and contact of substrate and hydrogen donor. The electron-enrichment state of Pt NPs donated by Fe₃O₄ nanocrystallites is corroborated by XPS measurement, which is responsible for promoting and activating the terminal C=O bond of adsorbed substrate via a vertical configuration. The experimental results show that the activated charcoal supported Pt/Fe₃O₄ catalyst exhibits 94.8% selectivity towards cinnamyl alcohol by the transfer hydrogenation of cinnamaldehyde with Pt loading of 2.46% under the optimum conditions of 120℃ for 6 h, and 2-propanol as a hydrogen donor. Additionally, the present study demonstrates that a high-efficient and recyclable catalyst can be rapidly separated from the mixture due to its natural magnetism upon the application of magnetic field.     

Development and characteristic analysis of a field-plated Al2O3/AlInN/GaN MOS–HEMT

We present an AlInN/AlN/GaN MOS–HEMT with a 3 nm ultra-thin atomic layer deposition (ALD) Al₂O₃ dielectric layer and a 0.3 μm field-plate (FP)-MOS--HEMT. Compared with a conventional AlInN/AlN/GaN HEMT (HEMT) with the same dimensions, a FP-MOS--HEMT with a 0.6 μm gate length exhibits an improved maximum drain current of 1141 mA/mm, an improved peak extrinsic transconductance of 325 mS/mm and effective suppression of gate leakage in both the reverse direction (by about one order of magnitude) and the forward direction (by more than two orders of magnitude). Moreover, the peak extrinsic transconductance of the FP-MOS--HEMT is slightly larger than that of the HEMT, indicating an exciting improvement of transconductance performance. The sharp transition from depletion to accumulation in the capacitance--voltage (C--V) curve of the FP-MOS--HEMT demonstrates a high-quality interface of Al₂O₃/AlInN. In addition, a large off-state breakdown voltage of 133 V, a high field-plate efficiency of 170 V/μ m and a negligible double-pulse current collapse is achieved in the FP-MOS--HEMT. This is attributed to the adoption of an ultra-thin Al₂O₃ gate dielectric and also of a field-plate on the dielectric of an appropriate thickness. The results show a great potential application of the ultra-thin ALD-Al₂O₃ FP-MOS--HEMT to deliver high currents and power densities in high power microwave technologies.     

活化气氛对钼基合成醇催化剂的结构和性能的影响

Activated carbon supported Mo-based catalysts were prepared and reduced under different activation atmospheres, including pure H₂, syngas (H₂/CO=2/1), and pure CO. The catalysts structures were characterized by X-ray diffraction, X-ray absorption fine structure, and in situ diffuse reflectance infrared Fourier transform spectroscopy. The catalytic performance for the higher alcohol synthesis from syngas was tested. The pure H₂ treatment showed a high reduction capacity. The presence of a large amount of metallic Co⁰. and low valence state Mo^φ+ (0<φ<2) on the surface suggested a super activity for the CO dissociation and hydrogenation, which promoted hydrocarbons formation and reduced the alcohol selectivity. In contrast, the pure CO-reduced catalyst had a low reduction degree. The Mo and Co species at the catalyst mainly existed in the form of Mo⁴⁺ and Co²⁺. The syngas-reduced catalyst showed the highest activity and selectivity for the higher alcohols synthesis. We suggest that the syngas treatment had an appropriate reduction capacity that is between those of pure H₂ and pure CO and led to the coexistence of multivalent Co species as well as the enrichment of Mo^δ+ on the catalyst''s surface. The synergistic effects between these active species provided a better cooperativity and equilibrium between the CO dissociation, hydrogenation and CO insertion and thus contributed beneficially to the formation of higher alcohols.     

窄带隙KNb1-xFexO3-δ的室温铁磁性

We have investigated the structure, optical and magnetic properties of ferroelectric KNb_1-xFexO_3-δ (X=0, 0.01, 0.03, 0.05, 0.10, 0.15, 0.20, 0.25) synthesized by a traditional solid-state reaction method. According to the X-ray diffraction and the results of Rietveld refinement, all the samples maintain orthorhombic distorted perovskite structures with Amm2 space group without any secondary phase, suggesting the well incorporation of Fe ions into the KNbO₃ matrix. With the increase of Fe concentration, the band gap of each sample is decreased gradually, which is much smaller than the 3.18 eV band gap of pure KNbO₃. Through X-ray photoelectron spectrum analysis, the increased density of oxygen vacancy and Fe ions may be responsible for the observed decrease in band gap. Compared with the pure KNbO₃, Fe doped samples exhibit room-temperature weak ferromagnetism. The ferromagnetism in KNb_1-xFexO_3-δ with low-concentration dopants (X=0.01-0.10) can be attributed to the bound magnetic polaron mediated exchange. The enhancement of magnetism for the high-concentration (X=0.10-0.20) doped samples may arise from the further increase of magnetic Fe ions.     

Relation between oxidation microstructure and the maximum energy product loss of a Sm2Co17 magnet oxidized at 500 ℃

The oxidation microstructure and maximum energy product (BH)_max loss of a Sm(Co_0.76, Fe_0.1, Cu_0.1, Zr_0.04)₇ magnet oxidized at 500 ℃ were systematically investigated. Three different oxidation regions were formed in the oxidized magnet: a continuous external oxide scale, an internal reaction layer, and a diffusion zone. Both room-temperature and high-temperature (BH)_max losses exhibited the same parabolic increase with oxidation time. An oxygen diffusion model was proposed to simulate the dependence of (BH)_max loss on oxidation time. It is found that the external oxide scale has little effect on the (BH)_max loss, and both the internal reaction layer and diffusion zone result in the (BH)_max loss. Moreover, the diffusion zone leads to more (BH)_max loss than the internal reaction layer. The values of the oxidation rate constant k for internal reaction layer and oxygen diffusion coefficient D for diffusion zone were obtained, which are about 1.91 × 10^-10 cm²/s and 6.54 × 10^-11 cm²/s, respectively.     

纯Cr2O3包覆Li4Ti5O12微球的制备及其储锂性能研究

The pure Cr₂O₃ coated Li₄Ti₅O₁₂ microspheres were prepared by a facile and cheap solutionbased method with basic chromium(III) nitrate solution (pH=11.9). And their Li-storage properties were investigated as anode materials for lithium rechargeable batteries. The pure Cr₂O₃ works as an adhesive interface to strengthen the connections between Li₄Ti₅O₁₂ particles, providing more electric conduction channels, and reduce the inter-particle resistance. Moreover, LixCr₂O₃, formed by the lithiation of Cr₂O₃, can further stabilize Li₇Ti₅O₁₂ with high electric conductivity on the surface of particles. While in the acid chromium solution (pH=3.2) modification, besides Cr₂O₃, Li₂CrO₄ and TiO₂ phases were also found in the final product. Li₂CrO₄ is toxic and the presence of TiO₂ is not welcome to improve the electrochemical performance of Li₄Ti₅O₁₂ microspheres. The reversible capacity of 1% Cr₂O₃-coated sample with the basic chromium solution modification was 180 mAh/g at 0.1 C, and 134 mAh/g at 10 C. Moreover, it was even as high as 127 mAh/g at 5 C after 600 cycles. At-20℃, its reversible specific capacity was still as high as 118 mAh/g.     

Reactions at the interface La0.5Ca0.5MnO3-YSZ/Al2O3 under anodic current

The reaction at the interface of a solid electrolyte cell between air electrode (La_0.5Ca_0.5MnO₃) and YSZ-electrolyte with different Al₂O₃-contents was investigated by electron microscopy (SEM) and x-ray diffraction (XRD). Formation of MnAl₂O₄ was detected in a 5 μm diffusion zone within the electrolyte. MnAl₂O₄ formation can be explained by diffusion of Mn-ions into the electrolyte and subsequent reaction with the α-Al₂O₃ grains during sintering. Cell performance and long-term stability in SOFC operation are not negatively affected by MnAl₂O₄ formation. However a rise in electrode resistance and slow delamination of perovskite oxide electrode were observed after some hours of electrolysis. This reaction is the consequence of oxygen gas pressure at the electrolyte in the MnAl₂O₄ diffusion zone. It is caused by local increase of electronic conductivity by MnAl₂O₄ formation. Long-term stability also for electrolysis conditions has been achieved by an additional intermediate YSZ-layer between air electrode and electrolyte. Paper presented at the 3rd Euroconference on Solid State Ionics, Teulada, Sardinia, Italy, Sept. 15–22, 1996     

利用原位傅里叶变换红外光谱诊断催化剂的特性和催化活性

The present work establishes a systematic approach based on the application of in-situ Fourier transform infrared spectroscopy (FTIR) for the investigation of the crystal structure, thermal stability, redox behavior (temperature-programmed reduction/temperatureprogrammed re-oxidation) as well as the catalytic properties of Co₃O₄ thin films. The syntheses of Co₃O₄ were achieved by chemical vapor deposition in the temperature range of 400-500℃. The structure analysis of the as-prepared material revealed the presence of two prominent IR bands peaking at 544 cm^-1 (υ₁) and 650 cm^-1 (υ₂) respectively, which originate from the stretching vibrations of the Co-O bond, characteristic of the Co₃O₄ spinel. The lattice stability limit of Co₃O₄ was estimated to be above 650℃. The redox properties of the spinel structure were determined by integrating the area under the emission bands υ₁ and υ₂ as a function of the temperature. Moreover, Co₃O₄ has been successfully tested as a catalyst towards complete oxidation of dimethyl ether below 340 ℃. The exhaust gas analysis during the catalytic process by in situ absorption FTIR revealed that only CO₂ and H₂O were detected as the final products in the catalytic reaction. The redox behavior suggests that the oxidation of dimethyl ether over Co₃O₄ follows a Mars-van Krevelen type mechanism. The comprehensive application of in situ FTIR provides a novel diagnostic tool in characterization and performance test of catalysts.     

镨掺杂对无钴钙钛矿型氧化物BaFeO3-δ电导率和透氧性能的影响

Among the perovskite-type oxides with symmetrical structure applied in oxygen permeable membranes,cubic phase structure is the most favorable for oxygen permeation.In order to stabilize the cubic perovskite structure of BaFeO_3-δ material at room temperature,iron was partially substituted by praseodymium.BaFe_1-yPr_yO_3-δ powders were synthesized by a solid state reaction method,and sintered samples were prepared from the synthesized BaFe_1-yPr_yO_3-δ powders.X-ray diffraction results reveal that the BaFe_1-yPr_yO_3-δ samples remain cubic structure at praseodymium substitution amount of y=0.05,0.075,0.1.Scanning electron microscope observation indicates that the sintered samples contain only a small amount of enclosed pores and the grain size of BaFe_1-yPr_yO_3-δ increase monotonically with the increase of the praseodymium doping amount,praseodymium doping promotes the grain size growth.Tests of electrical conductivity and oxygen permeation flux show that praseodymium doping improves the conduction properties of BaFe_1-yPr_yO_3-δ and BaFe_0.9Pr_0.1O_3-δ composition has an electrical conductivity of 6.5 S/cm and an oxygen permeation of 1.112 mL/(cm²·min) at 900 ℃,respectively.High temperature XRD investigation shows that the crystal structure of BaFe_0.975Pr_0.025O_3-δ membrane completely transform to cubic phase at 700 ℃.The present test results have shown that partially substitution of Fe by praseodymium in BaFeO₃ can stabilize the cubic structure and improve the properties.     

一种新型Ag3PO4/Ag/Ag2Mo2O7纳米线光催化剂：三元纳米复合物的光催化活性

Ag₃PO₄/Ag/Ag₂Mo₂O₇ composite photocatalyst was successfully prepared via an in situ precipitation method. The as-prepared Ag₃PO₄/Ag/Ag₂Mo₂O₇ nanocomposite included Ag₃PO₄ nanoparticles (NPs) as well as Ag NPs assembling on the surface of Ag₂Mo₂O₇ nanowires. Under visible light irradiation (λ>420 nm), the Ag₃PO₄/Ag/Ag₂Mo₂O₇ composite degraded rhodamine B (Rh B) efficiently and showed much higher photocatalytic efficiency than pure Ag₃PO₄, Ag₂Mo₂O₇, or Ag₃PO₄/Ag₂Mo₂O₇. It was elucidated that the excellent photocatalytic performance of Ag₃PO₄/Ag/Ag₂Mo₂O₇ for the degradation of Rh B under visible light could be ascribed to the high specific surface area, the extended absorption in the visible light region resulting from the Ag₃PO₄/Ag loading, and the efficient separation of photogenerated electrons and holes through the ternary heterostrucure composed of Ag₃PO₄, Ag and Ag₂Mo₂O₇.     

丙烷与O(3P)反应机理和动力学的理论研究

The reaction of C₃H₈+O(³P)→C₃H₇+OH is investigated using ab initio calculation and dynamical methods. Electronic structure calculations for all stationary points are obtained using a dual-level strategy. The geometry optimization is performed using the unrestricted second-order Møller-Plesset perturbation method and the single-point energy is computed using the coupled-cluster singles and doubles augmented by a perturbative treatment of triple excitations method. Results indicate that the main reaction channel is C₃H₈+O(³P)→i-C₃H₇+OH. Based upon the ab initio data, thermal rate constants are calculated using the variational transition state theory method with the temperature ranging from 298 K to 1000 K. These calculated rate constants are in better agreement with experiments than those reported in previous theoretical studies, and the branching ratios of the reaction are also calculated in the present work. Furthermore, the isotope effects of the title reaction are calculated and discussed. The present work reveals the reaction mechanism of hydrogen-abstraction from propane involving reaction channel competitions is helpful for the under-standing of propane combustion.     

Spectroscopic investigations on NO+(x1∑+,a3∑+,A1Ⅱ) ion using multi-reference configuration interaction method and correlation-consistent sextuple b

Three low-lying electronic states (x¹∑⁺,a³∑⁺,and A¹Ⅱ) of NO⁺ ion are studied using the complete active space self-consistent-field (CASSCF) method followed by highly accurate valence internally contracted multi-reference configuration interaction (MRCI) approach in combination of the correlation-consistent sextuple basis set augmented with diffuse functions, aug-cc-pV6Z. The potential energy curves (PECs) of the NO⁺(x¹∑⁺,a³∑⁺,A¹Ⅱ) are calculated. Based on the PECs, the spectroscopic parameters R_e, D_e, ω_e, ω_eχ_e, α _e, B_e, and D₀ are reproduced, which are in excellent agreement with the available measurements. By numerically solving the radial Schrödinger equation of nuclear motion using the Numerov method, the first 20 vibrational levels, inertial rotation and centrifugal distortion constants of NO⁺(x¹∑⁺,a³∑⁺,A¹Ⅱ) ion are derived when the rotational quantum number J is equal to zero (J = 0) for the first time, which accord well with the available measurements. Finally, the analytical potential energy functions of these states are fitted, which are used to accurately derive the first 20 classical turning points when J = 0. These results are compared in detail with those of previous investigations reported in the literature.     

Investigations of spectroscopic parameters and molecular constants for X1Σg+, w3Δu, and W1Δu electronic states of P2 molecule

The potential energy curves (PECs) of three low-lying electronic states (X¹Σ_g⁺, w³Δ_u, and W¹Δ_u)of P₂ molecule are investigated using the full valence complete active space self-consistent field (CASSCF) method followed by the highly accurate valence internally contracted multireference configuration interaction (MRCI) approach in conjunction with the correlation-consistent basis set in the valence range. The PECs of the electronic states involved are modified by the Davidson correction and extrapolated to the complete basis set (CBS) limit. With these PECs, the spectroscopic parameters of the three electronic states are determined and compared in detail with the experimental data. The comparison shows that excellent agreement exists between the present results and the available experimental data. The complete vibrational states are computed for the w³Δ_u, and W¹Δ_u electronic states when the rotational quantum number J equals zero and the vibrational level G(v), the inertial rotation constant B_v, and the centrifugal distortion constant D_v of the first 30 vibrational states are reported, which accord well with the experimental data. The present results show that the two-point extrapolation scheme can obviously improve the quality of spectroscopic parameters and molecular constants.     

基于Co3O4修饰SnO2纳米纤维的高响应和高选择性乙醇气体传感器

SnO₂ nanofibers were synthesized by electrospinning and modified with Co₃O₄ via impregnation in this work. Chemical composition and morphology of the nanofibers were systematically characterized, and their gas sensing properties were investigated. Results showed that Co₃O₄ modification significantly enhanced the sensing performance of SnO₂ nanofibers to ethanol gas. For a sample with 1.2 mol% Co₃O₄, the response to 100 ppm ethanol was 38.0 at 300℃, about 6.7 times larger than that of SnO₂ nanofibers. In addition, the response/recovery time was also greatly reduced. A power-law dependence of the sensor response on the ethanol concentration as well as excellent ethanol selectivity was observed for the Co₃O₄/SnO₂ sensor. The enhanced ethanol sensing performance may be attributed to the formation of p-n heterojunctions between the two oxides.     

Investigation of 4H—SiC metal—insulation—semiconductor structure with Al2O3/SiO2 stacked dielectric

Atomic layer deposited (ALD) Al₂O₃/dry-oxidized ultrathin SiO₂ films as high-k gate dielectric grown on the 8° off-axis 4H-SiC (0001) epitaxial wafers are investigated in this paper. The metal-insulation-semiconductor (MIS) capacitors, respectively with different gate dielectric stacks (Al₂O₃/SiO₂, Al₂O₃, and SiO₂) are fabricated and compared with each other. The I-V measurements show that the Al₂O₃/SiO₂ stack has a high breakdown field ( ≥ 12 MV/cm) comparable to SiO₂, and a relatively low gate leakage current of 1× 10^-7 A/cm² at electric field of 4 MV/cm comparable to Al₂O₃. The 1-MHz high frequency C-V measurements exhibit that the Al₂O₃/SiO₂ stack has a smaller positive flat-band voltage shift and hysteresis voltage, indicating less effective charge and slow-trap density near the interface.     

MgO/NaY催化剂上葡萄糖水中异构制取果糖的研究

The MgO/NaY catalysts prepared by impregnation method were used for the conversion of glucose to fructose in water medium.The effects of MgO loading,reaction temperature,glucose concentration and reaction time on the catalytic performance for the reaction were studied.The activity testing results indicated that fructose could be generated effectively by controlling the components of the catalyst and reaction conditions.The maximal fructose yield of 33.8% with the selectivity of 67.3% was achieved over the 10% MgO/NaY catalyst at 100 ℃ for 2 h.Moreover,the catalysts were characterized by XRD,BET,and CO₂-TPD techniques.The structural property of NaY with higher surface area facilitated glucose conversion,and the modulated basicity of the catalyst with MgO addition contributed to the formation of fructose in the tautomerization of aldose to ketose.     

Extended triplet set C343 of DNA sequences and its application to the p53 gene

Recently, much research has indicated that more and more cancers pose a threat to human life. Cancers are caused by oncogenes. Many human oncogenes have been found and most of them are located on chromosomes. The discovery of the oncogene plays a significant role in the treatment of cancer. The p53 tumor suppressor gene has received much attention because it frequently mutates or deletes in tumor cells of most people. Thus, the study of oncogenes is significant. In order to establish the Galois field (GF(7)), the indefinite gene is introduced as D and oncogene is introduced as O, and P. Taking the polynomial coefficients a₀, a₁, a₂ ∈ GF(7) and the bijective function f:GF(7) → {D,A,C,O,G,T,P}, where f(0) = D, f(1) = A, f(2) = C, f(3) = O, f(4) = G, f(5) = T, and f(6) = P, the bijective φ may be written as φ(a₀ + a₁x + a₂x²). Based on the algebraic structure, we can not only analyse the DNA sequence of oncogenes, but also predict possible new cancers.     

大气中硫酸生成反应势能面的量子化学研究

A new potential energy surface (PES) for the atmospheric formation of sulfuric acid from OH+SO₂ is investigated using density functional theory and high-level ab initio molecular orbital theory. A pathway focused on the new PES assumes the reaction to take place between the radical complex SO₃·HO₂ and H₂O. The unusual stability of SO₃·HO₂ is the principal basis of the new pathway, which has the same final outcome as the current reaction mechanism in the literature but it avoids the production and complete release of SO₃. The entire reaction pathway is composed of three consecutive elementary steps:(1) HOSO₂+O₂→SO₃·HO₂, (2) SO₃·HO₂+H₂O→SO₃·H₂O·HO₂, (3) SO₃·H₂O·HO₂→H₂SO₄+HO₂. All three steps have small energy barriers, under 10 kcal/mol, and are exothermic, and the new pathway is therefore favorable both kinetically and thermodynamically. As a key step of the reactions, step (3), HO₂ serves as a bridge molecule for low-barrier hydrogen transfer in the hydrolysis of SO₃. Two significant atmospheric implications are expected from the present study. First, SO₃ is not released from the oxidation of SO₂ by OH radical in the atmosphere. Second, the conversion of SO₂ into sulfuric acid is weakly dependent on the humidity of air.     

虚晶近似法研究AlN-Al2O3固溶体系的力学性能和电子结构

基于密度泛函理论的第一性原理平面波赝势方法, 运用虚晶近似方法计算了AlN-Al₂O₃固溶区内尖晶石相氮氧化铝(Al₂₄O₂₄N₈, Al₂₃O₂₇N₅和Al₂₂O₃₀N₂)和α-Al₂O₃, AlN的力学性能和电子结构. 结果证明虚晶近似法应用到氮氧化铝结构计算中是可行的. 力学常数计算结果和弹性模量B, 剪切模量G, 杨氏模量E反映的材料硬度变化趋势与实验基本一致;Al₂O₃-AlN固 溶区内五种结构均为脆性性质且Al₂₃O₂₇N₅脆性最低, 硬度高、脆性低的特性反映了Al₂₃O₂₇N₅优异的抗弯强度性能. 五种结构满足力学结构上的稳定性, 立方尖晶石相氮氧化铝表现为弹性各向异性. 能带和态密度的计算分析表明这五种结构均为直接宽带隙结构. 在费米能级附近, 氮氧化铝结构中阴离子的2p态和阳离子的3s, 3p态发生了轨道杂化. 理论结果与实验数据基本符合, 为进一步研究提供了一定的理论方法和依据.