Influence of the broken symmetry of defect state distribution at the a-Si:H/c-Si interface on the performance of hetero-junction solar cells

Taking into account the fact that the distribution of defect states at the interface does not have strictly symmetrical shape, we present a simulation study of a-Si:H(n)/c-Si(p) and a-Si:H(p)/c-Si(n) structures with regard to the defect states at the interface, band offsets and doping concentration of the emitter. The presented results suggest for a-Si:H(n)/c-Si(p) solar cells a strong influence of the introduced broken symmetry between acceptor and donor defect states on the open-circuit voltage, whereas the a-Si:H(p)/c-Si(n) structure benefits from inherent favorable band alignment and remains unaffected.     

硅异质结太阳电池的物理机制和优化设计

硅异质结太阳电池是一种由非晶硅薄膜层沉积于晶硅吸收层构成的高效低成本的光伏器件,是一种具有大面积规模化生产潜力的光伏产品.异质结界面钝化品质、发射极的掺杂浓度和厚度以及透明导电层的功函数是影响硅异质结太阳电池性能的主要因素.针对这些影响因素已经有大量的研究工作在全世界范围内展开,并且有诸多研究小组提出了器件效率限制因素背后的物理机制.洞悉物理机制可为今后优化设计高性能的器件提供准则.因此及时总结硅异质结太阳电池的物理机制和优化设计非常必要.本文主要讨论了晶硅表面钝化、发射极掺杂层和透明导电层之间的功函数失配以及由此形成的肖特基势垒;讨论了屏蔽由功函数失配引起的能带弯曲所需的特征长度,即屏蔽长度;介绍了硅异质结太阳电池优化设计的数值模拟和实践;总结了硅异质结太阳电池的研究现状和发展前景.     

Influence of the semiconductor/metal rear contact on the performance of n(a-Si:H)/i(a-Si:H)/p(c-Si) heterojunction solar cells

The aim of this work is to analyze on the results of using of Al/Ag layer as a rear contact to improve the performance of heterojunction silicon solar cells. An analytical method is presented to extract the physical parameters of the equivalent circuit. These parameters are extracted to simulate the I(V) characteristic of heterojunction silicon solar cells, with Al and Al/Ag rear-metal contact. A good agreement between our analytical method and experimental measurement of electrical characteristics is obtained which show clearly how the Al/Ag rear contact can improve the characteristics of silicon solar cells. The influence of the rear-metal contact on the performance of the c-Si(p)-based bifacial HIT solar cell, i.e., the ZnO/Al/a-Si:H(n)/a-Si:H(i)/c-Si(p)/metal solar cell, is investigated in detail by computer simulation using the AFORS-HET software. Accordingly, the design optimization of the bifacial HIT solar cells on c-Si(p) substrates is provided. These simulation show an optimal conversion efficiency of 23% when the rear-metal contact is perfectly ohmic.     

Understanding of a-Si:H(p)/c-Si(n) heterojunction solar cell through analysis of cells with point-contacted p/n junction

We fabricated point-contacted a-Si:H(p)/c-Si(n) heterojunction solar cells using patterned SiO₂ and investigated their electrical properties using the light current–voltage (I–V) curve and Suns-V_oc measurements. The light I–V curves showed bias-dependent changes according to the applied voltage in the point-contacted cells, especially in the samples with a long distance between the point-contacted junctions. The Suns-V_oc measurements showed that the bias-dependence of the light I–V curves did not originate from the recombination in the SiO₂/Si or a-Si:H(p)/c-Si(n) interface, but from the series resistances. It is possible to explain the bias-dependent light I–V curve in terms of the conductivity of a-Si:H(p) and difference in the electrical contact properties between a-Si:H(p), ZnO and c-Si(n). These results mean that the electrical properties of the a-Si:H(p) layer and the contact properties with this layer are also critical to obtain a high J_sc and fill factor in n-type based Si heterojunction solar cells.     

渐变带隙氢化非晶硅锗薄膜太阳能电池的优化设计

利用一维微电子-光电子结构分析软件(AMPS-1D)在AM1.5G(100 mW/cm2)、室温条件下模拟和比较了有、无渐变带隙氢化非晶硅锗(a-SiGe:H)薄膜太阳能电池的各项性能.计算结果表明:渐变带隙结构电池具有较高的开路电压(V oc)和较好的填充因子(FF),转换效率(E ff)比非渐变带隙电池提高了0.477%.研究了氢化非晶硅(a-Si:H)、氢化非晶碳化硅(a-SiC:H)和氢化纳米晶硅(nc-Si:H)三种不同材料的窗口层对a-SiGe:H薄膜太阳能电池性能的影响.结果显示:在以nc-Si:H为窗口层的电池能带中,费米能级E F已经进入价带,使得窗口层电导率及电池开路电压有所提高,又由于ITO与p-nc-Si:H的接触势垒较低,使得接触处的电场降低,更有利于载流子的收集.另一方面,窗口层与a-SiGe:H薄膜之间存在较大的带隙差,在p/i界面由于能带补偿作用形成了价带势垒(带阶)?E v,阻碍了空穴的迁移,因此我们在p/i界面引入缓冲层,使得能带补偿作用得到释放,更有利于空穴的迁移和收集,得到优化后单结渐变带隙a-SiGe:H薄膜结构太阳能电池的转换效率达到了9.104%.     

Sub-stochiometric MoOx by radio-frequency magnetron sputtering as hole-selective passivating contacts for silicon heterojunction solar cells

The silicon heterojunction (SHJ) solar cell has long been considered as one of the most promising candidates for the next-generation PV market. Transition metal oxides (TMOs) show good carrier selectivity when combined with c-Si solar cells. This has led to the rapid demonstration of the remarkable potential of TMOs (especially MoO_x) with high work function to replace the p-type a-Si:H emitting layer. MoO_x can induce a strong inversion layer on the interface of n-type c-Si, which is beneficial to the extraction and conduction of holes. In this paper, the radio-frequency (RF) magnetron sputtering is used to deposit MoO_x films. The optical, electrical and structural properties of MoO_x films are measured and analyzed, with focus on the inherent compositions and work function. Then the MoO_x films are applied into SHJ solar cells. When the MoO_x works as a buffer layer between ITO/p-a-Si:H interface in the reference SHJ solar cell, a conversion efficiency of 19.1% can be obtained. When the MoO_x is used as a hole transport layer (HTL), the device indicates a desirable conversion efficiency of 17.5%. To the best of our knowledge, this current efficiency is the highest one for the MoO_x film as HTL by RF sputtering.     

载流子选择性接触:高效硅太阳电池的选择

太阳电池可看成由光子吸收层和接触层两个基本单元组成,接触层是高复合活性金属界面和光子吸收层之间的区域.为了进一步提高硅太阳电池的转换效率,关键是降低光子吸收层和接触之间的复合损失.近年来,载流子选择性接触引起了光伏界的研究兴趣,其被认为是接近硅太阳电池效率理论极限的最后的障碍之一.本文分析了三种类型的载流子选择性接触:在光子吸收层与金属界面之间引入薄的重掺杂层,即所谓的发射极或背面场;利用两种材料之间的导带或价带对齐;利用高功函数的金属氧化物与晶硅接触从而在晶硅中感应能带弯曲.基于一维太阳电池模拟软件wx AMPS,模拟了扩散同质结硅太阳电池[结构为(p~+)c-Si/(n)c-Si/(n~+)c-Si]、非晶硅薄膜硅异质结太阳电池[结构为(p~+)a-Si/(i)a-Si/(n)c-Si/(i)a-Si/(n~+)a-Si]和氧化物薄膜硅异质结太阳电池[结构为(n)MoO_x/(n)c-Si/(n)TiO_x]暗态下的能带结构和载流子浓度的空间分布,其中c-Si为晶硅;a-Si为非晶硅;(i),(n)和(p)分别表示本征、n型掺杂和p型掺杂.模拟结果表明:载流子选择性接触的核心是在接触处晶硅表面附近形成载流子浓度空间分布的不对称进而使得电导率的不对称,形成了对电子的高阻和空穴的低阻或者对空穴的高阻和电子的低阻,从而让空穴轻松通过同时阻挡电子,或者让电子轻松通过同时阻挡空穴,形成空穴选择性接触或者电子选择性接触.     

太阳电池用本征微晶硅材料的制备及其结构研究

采用VHF-PECVD技术制备了系列不同硅烷浓度和反应气压的微晶硅薄膜.运用拉曼散射光谱和 x射线衍射对制备的材料进行了结构分析.在实验研究的范围内，制备材料的晶化程度随硅烷 浓度的增加而降低.XRD的测试结果表明：制备的微晶硅材料均体现了(220)方向择优.应用在 电池的有源层中，制备出了效率达7.1%的单结微晶硅太阳电池，电池的结构是glass/ZnO/p( μc-Si:H)/i(μc-Si:H)/n(a-Si:H/Al)，没有ZnO背反射电极，有源层的厚度仅为1.2μm. 关键词： 本征微晶硅薄膜 拉曼光谱 x射线衍射     

纳米硅(nc-Si:H )/晶体硅(c-Si)异质结太阳电池的数值模拟分析

运用美国宾州大学发展的AMPS程序模拟分析了n-型纳米硅（n+-nc-Si:H）/p-型晶体硅(p-c-Si)异质结太阳电池的光伏特性.分析表明，界面缺陷态是决定电池性能的关键因素，显著影响电池的开路电压（VOC）和填充因子（FF），而电池的光谱响应或短路电流密度（JSC）对缓冲层的厚度较为敏感.对不同能带补偿（bandgap offset）的情况所进行的模拟分析表明，随着ΔEc的增大，由于界面态所带来的开路电压和填充因子的减小逐渐被消除，当ΔEc达到05eV左右时界面态的影响几乎完全被掩盖.界面层的其他能带结构特征对器件性能的影响还有待进一步研究.最后计算得到了这种电池理想情况下（无界面态、有背面场、正背面反射率分别为0和1）的理论极限效率ηmax=3117% (AM15，100mW/cm2，040—110μm波段).     

梯度掺杂对n型异质结太阳能电池性能的影响

通过仿真软件AFORS-HET对a-Si:H(p)/i-a-Si:H/c-Si(n)异质结太阳能电池的光伏特性进行分析及优化,主要对比了a-Si:H(p)层的均匀掺杂和表面掺杂浓度D₁=1×10²⁰ cm^-3>界面掺杂浓度D₂=4×10¹⁹ cm^-3的梯度掺杂情况时的光伏特性,实现了在梯度掺杂时22.32%的光电转换效率。与均匀梯度掺杂相比,发射层的梯度掺杂除了引入一个附加电场,还优化了能带结构、光谱响应、表面复合速率。结果表明,梯度掺杂可以有效地改善电池的光电转换性能。     

Superstrate p-i-n a-Si:H solar cells on textured ZnO:Al front transparent conduction oxide

Superstrate p-i-n amorphous silicon thin-film (a-Si:H) solar cells are prepared on SnO₂:F and ZnO:Al transparent conducting oxides (TCOs) in order to see the effect of TCO/p-layers on a-Si:H solar cell operation. The solar cells prepared on textured ZnO:Al have higher open circuit voltage V_oc than cells prepared on SnO₂:F. The presence of a thin microcrystalline p-type silicon layer (μc-Si:H) between ZnO:Al and p a-SiC:H plays a major role by causing an improvement in the fill factor as well as in V_oc of a-Si:H solar cells prepared on ZnO:Al TCO. Without any treatment of the p-i interface, we could obtain a high V_oc of 994 mV while keeping the fill factor (72.7%) and short circuit current density J_sc at the same level as for the cells on SnO₂:F TCO. This high V_oc value can be attributed to modification in the current transport in this region due to creation of a potential barrier.     

a-Si:H/c-Si 异质结太阳电池 J-V 曲线的 S-Shape 现象

通过异质结界面分析与 AMPS 模拟计算研究了 a-Si:H/c-Si 异质结太阳电池在低温工作、a-Si:H 层低掺杂、高价带补偿以及高界面态时光态 J-V 曲线出现 S-Shape 现象的物理过程,总结了 S-Shape 现象的物理原因.分析结果表明,当空穴输运受到界面势垒的限制时,空穴在 c-Si 界面附近聚集,能带重新分配,c-Si 耗尽区的电场减小,更多的电子从 c-Si 准中性区反转至 c-Si 界面及耗尽区与空穴复合,复合速率显著增大,光电流的损失显著增大,光态 J-V< 关键词： 模拟 异质结太阳电池 a-Si:H/c-Si 异质结     

Microstructure evolution and passivation quality of hydrogenated amorphous silicon oxide(a-SiOx:H) on〈100〉- and 〈111〉-orientated c-Si wafers

Hydrogenated amorphous silicon oxide(a-SiOx:H) is an attractive passivation material to suppress epitaxial growth and reduce the parasitic absorption loss in silicon heterojunction(SHJ) solar cells. In this paper, a-SiOx:H layers on different orientated c-Si substrates are fabricated. An optimal effective lifetime(τ(eff)) of 4743 μs and corresponding implied opencircuit voltage(iV(oc)) of 724 mV are obtained on〈100〉-orientated c-Si wafers. While τ(eff) of 2429 μs and iV_oc of 699 mV are achieved on 111-orientated substrate. The FTIR and XPS results indicate that the a-SiOx:H network consists of SiOx(Si-rich), Si–OH, Si–O–SiHx, SiO2 ≡ Si–Si, and O3 ≡ Si–Si. A passivation evolution mechanism is proposed to explain the different passivation results on different c-Si wafers. By modulating the a-SiOx:H layer, the planar silicon heterojunction solar cell can achieve an efficiency of 18.15%.     

Theoretical investigation on the passivation layer with linearly graded bandgap for the amorphous/crystalline silicon heterojunction solar cell

Passivation layer with linearly graded bandgap (LGB) was proposed to improve the performance of amorphous/crystalline silicon heterojunction (SHJ) solar cell by eliminating the large abrupt energy band uncontinuity at the a‐Si:H/c‐Si interface. Theoretical investigation on the a‐Si:H(p)/the LGB passivation layer(i)/c‐Si(n)/a‐Si:H(i)/a‐Si:H(n⁺) solar cell via AFORS‐HET simulation show that such LGB passivation layer could improve the solar cell efficiency (η) by enhancing the fill factor (FF) greatly, especially when the a‐Si:H(p) emitter was not efficiently doped and the passivation layer was relatively thick. But gap defects in the LGB passivation layer could make the improvement discounted due to the open‐circuit voltage (V_OC) decrease induced by recombination. To overcome this, it was quite effective to keep the gap defects away from the middle of the bandgap by widening the minimum bandgap of the LGB passivation layer to be a little larger than that of the c‐Si base. The underlying mechanisms were analysed in detail. How to achieve the LGB passivation layer experimentally was also discussed. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Generation of Terahertz Radiation under the Femtosecond Laser Excitation of a Multilayer Structure Based on a-Si:H/a-SiC:H/c-Si

JETP Letters - Coherent terahertz radiation has been generated in p–n heterostructures based on a-Si:H/a-SiC:H/c-Si excited by 800-nm femtosecond laser pulses at room temperature. Terahertz...     

钙钛矿/硅叠层太阳电池中平面a-Si:H/c-Si异质结底电池的钝化优化及性能提高

最近,旋涂法制备的钙钛矿/平面硅异质结高效叠层太阳电池引起人们广泛关注,主要原因是相比于绒面硅衬底制备的钙钛矿/硅叠层太阳电池,其制备工艺简单、制备成本低且效率高.对于平面a-Si:H/c-Si异质结电池, a-Si:H/c-Si界面的良好钝化是获得高转换效率的关键,进而决定了钙钛矿/硅异质结叠层太阳电池的性能.本文主要从硅片表面处理、a-Si:H钝化层和P型发射极等方面展开研究,通过对硅片表面的氢氟酸(HF)浸泡时间和氢等离子体预处理气体流量、a-Si:H钝化层沉积参数、钝化层与P型发射极(I/P)界面富氢等离子体处理的综合调控,获得了相应的优化工艺参数.对比研究了p-a-Si:H和p-nc-Si:H两种缓冲层材料对I/P界面的影响,其中高电导、宽带隙的p-nc-Si:H缓冲层既能够降低I/P界面的缺陷态,又可以增强P型发射层的暗电导率,提高了前表面场效应钝化效果.通过上述优化,制备出最佳的P-type emitter layer/aSi:H(i)/c-Si/a-Si:H(i)/N-type layer (inip)结构样品的少子寿命与implied-Voc分别达到2855μs和709 mV,表现出良好的钝化效果.应用于平面a-Si:H/c-Si异质结太阳电池,转换效率达到18.76%,其中开路电压达到681.5 mV,相对于未优化的电池提升了34.3 mV.将上述平面a-Si:H/c-Si异质结太阳电池作为底电池,对应的钙钛矿/硅异质结叠层太阳电池的开路电压达到1780 mV,转换效率达到21.24%,证明了上述工艺优化能够有效地改善叠层太阳电池中的硅异质结底电池的钝化及电池性能.     

Wet-chemical passivation of atomically flat and structured silicon substrates for solar cell application

Special sequences of wet-chemical oxidation and etching steps were optimised with respect to the etching behaviour of differently oriented silicon to prepare very smooth silicon interfaces with excellent electronic properties on mono- and poly-crystalline substrates. Surface photovoltage (SPV) and photoluminescence (PL) measurements, atomic force microscopy (AFM) and scanning electron microscopy (SEM) investigations were utilised to develop wet-chemical smoothing procedures for atomically flat and structured surfaces, respectively. Hydrogen-termination as well as passivation by wet-chemical oxides were used to inhibit surface contamination and native oxidation during the technological processing. Compared to conventional pre-treatments, significantly lower micro-roughness and densities of surface states were achieved on mono-crystalline Si(100), on evenly distributed atomic steps, such as on vicinal Si(111), on silicon wafers with randomly distributed upside pyramids, and on poly-crystalline EFG (Edge-defined Film-fed-Growth) silicon substrates.The recombination loss at a-Si:H/c-Si interfaces prepared on c-Si substrates with randomly distributed upside pyramids was markedly reduced by an optimised wet-chemical smoothing procedure, as determined by PL measurements. For amorphous-crystalline hetero-junction solar cells (ZnO/a-Si:H(n)/c-Si(p)/Al) with textured c-Si substrates the smoothening procedure results in a significant increase of short circuit current I_sc, fill factor and efficiency η. The scatter in the cell parameters for measurements on different cells is much narrower, as compared to conventional pre-treatments, indicating more well-defined and reproducible surface conditions prior to a-Si:H emitter deposition and/or a higher stability of the c-Si surface against variations in the a-Si:H deposition conditions.     

非晶硅太阳电池光照J-V特性的AMPS模拟

运用AMPS(Analysis of Microelectronic and Photonic Structures)模拟分析了TCO/p_a_SiC:H/i_a_Si:H/n_a_Si:H/metal结构的异质结非晶硅太阳电池中的p/i界面的价带失配以及TCO/p,n/metal界面接触势垒对电池光电特性的影响.分析总结了非晶硅基薄膜太阳电池中J-V曲线异常拐弯现象的种类和可能原因.     

p种子层对单室制备微晶硅电池性能的影响

采用单室等离子体化学气相沉积技术沉积pin微晶硅电池时,硼污染降低了本征材料的晶化率并影响了p/i界面特性.针对该问题文中采用p种子层技术,即在沉积p层后采取高的H₂/SiH₄比率及适当的功率又沉积一个薄的p层,初步研究了p种子层对微晶硅i层纵向均匀性及电池性能的影响.实验结果表明：采用此方法能改善p/i界面特性,提高本征材料纵向结构的均匀性并降低硼对本征层的污染,有效地提高单结微晶硅电池的性能.最后,通过优化沉积条件,制备得到光电转换效率为881%（1 cm 关键词： 单室 甚高频等离子体增强化学气相沉积 微晶硅太阳电池 p种子层     

硅锗量子阱结构在硅异质结太阳电池中应用的数值模拟

利用半导体工艺和器件仿真软件silvaco TCAD(Technology Computer Aided Design),模拟研究了采用硅/硅锗合金(silicon/silicon germanium alloy,Si/Si_(1-x)Ge_x)量子阱结构作为吸收层的薄膜晶体硅异质结太阳电池各项性能.模拟结果显示,长波波段光学吸收随锗含量的增加而增加,而开路电压则因Si_(1-x)Ge_x)层带隙的降低而下降.锗含量为0.25时,短路电流密度的增加补偿了开路电压的衰减,效率提升0.2%.氢化非晶硅/晶体硅(a-Si:H/c-Si)界面空穴密度以及Si_(1-x)Ge_x)量子阱的体空穴载流子浓度制约着空穴费米能级的位置,进而影响到开路电压的大小.随着锗含量增加,a-Si:H/c-Si界面缺陷对开压的影响降低,Si_(1-x)Ge_x)量子阱的体缺陷对开压的影响则相应增加.高效率含Si_(1-x)Ge_x)量子阱结构的硅异质结太阳电池的制备需要a-Si:H/c-Si界面缺陷的良好钝化以及高质量Si_(1-x)Ge_x)量子阱的生长.