排序方式: 共有9条查询结果,搜索用时 15 毫秒
1
1.
2.
3.
The investigation of ZnO:Al2O3/metal composite back reflectors in amorphous silicon germanium thin film solar cells 下载免费PDF全文
Different aluminum-doped ZnO (AZO)/metal composite thin films, including AZO/Ag/Al, AZO/Ag/nickelchromium alloy (NiCr), and AZO/Ag/NiCr/Al, are utilized as the back reflectors of p-i-n amorphous silicon germanium thin film solar cells. NiCr is used as diffusion barrier layer between Ag and Al to prevent mutual diffusion, which increases the short circuit current density of solar cell. NiCr and NiCr/AI layers are used as protective layers of Ag layer against oxidation and sulfurization, the higher efficiency of solar cell is achieved. The experimental results show that the performance of a-SiGe solar cell with AZO/Ag/NiCr/Al back reflector is best. The initial conversion efficiency is achieved to be 8.05%. 相似文献
4.
采用原位的氢等离子体处理技术和微晶覆盖技术来降低单室沉积p-i-n型微晶硅薄膜太阳电池中的硼污染问题.通过对不同处理技术所制备电池的电流密度-电压和量子效率测试结果的比较发现,一定的氢处理时间和合适的覆盖层技术都可以在一定程度上提高电池的性能,但每种方法的影响程度各异、文中对此异同进行了分析.通过对电池陷光结构和氢等离子体处理时间的优化,在单室中获得了效率为6.39%的单结微晶硅太阳电池. 相似文献
5.
采用单室等离子体化学气相沉积技术沉积pin微晶硅电池时,硼污染降低了本征材料的晶化率并影响了p/i界面特性.针对该问题文中采用p种子层技术,即在沉积p层后采取高的H2/SiH4比率及适当的功率又沉积一个薄的p层,初步研究了p种子层对微晶硅i层纵向均匀性及电池性能的影响.实验结果表明:采用此方法能改善p/i界面特性,提高本征材料纵向结构的均匀性并降低硼对本征层的污染,有效地提高单结微晶硅电池的性能.最后,通过优化沉积条件,制备得到光电转换效率为881%(1 cm
关键词:
单室
甚高频等离子体增强化学气相沉积
微晶硅太阳电池
p种子层 相似文献
6.
采用甚高频等离子体增强化学气相沉积(VHF-PECVD)技术制备了不同腔室环境下的微晶硅薄膜.对单室沉积掺杂层p材料后遗留在腔室中的硼对本征微晶i材料电学特性和结构特性的影响进行了详细研究.测试结果表明:单室沉积p层后的硼降低了微晶i层材料的暗电导,增加了材料的光敏性;由于硼对i层污染程度的不同,使得材料的激活能发生了变化;腔室中残余的硼也导致微晶硅薄膜的结晶状况恶化,同时弱化了材料的(220)择优取向.而在较高功率和较强氢稀释下制备的晶化率较高,(220)晶向明显择优的材料受硼污染影响相对减小.
关键词:
单室
甚高频等离子体增强化学气相沉积
微晶硅
硼 相似文献
7.
半导体材料的纵光学声子与等离子体激元耦合模(LOPC模)能够提供材料电学方面的相关信息。本文在室温下测得了n型4H-和6H-SiC的拉曼光谱,分析了掺入的杂质对于SiC晶体拉曼光谱的影响,通过拟合n型4H-和6H-SiC晶体的LOPC模的线型得到等离子体频率,并由此从理论上计算了载流子浓度。载流子浓度的理论计算值与霍尔测量的结果符合得很好。研究结果进一步证实了对于n型4H-和6H-SiC晶体,可以通过分析LOPC模的线形来较准确地给出相关材料的载流子浓度。 相似文献
8.
Reduction of the phosphorus contamination for plasma deposition of p-i-n microcrystalline silicon solar cells in a single chamber 下载免费PDF全文
This paper investigates several pretreatment techniques used to reduce the phosphorus contamination between solar cells. They include hydrogen plasma pretreatment, deposition of a p-type doped layer, i-a-Si:H or μc-Si:H covering layer between solar cells. Their effectiveness for the pretreatment is evaluated by means of phosphorus concentration in films, the dark conductivity of p-layer properties and cell performance. 相似文献
9.
1