锂离子电池负极材料立方相氮化铌纳米材料的制备与性能(英文)

采用固相合成方法,在反应釜中350℃下合成了氮化铌纳米材料。X射线粉末衍射图表明所得氮化铌样品为立方相(空间群:Fm3m)。高分辨透射电子显微镜与场发射扫描电子显微镜显示所制得的氮化铌样品直径分布在30~300 nm之间。热重分析表明所得材料在空气中具有良好的抗氧化性能。将氮化铌与锂片组装成纽扣电池进行充放电测试,测试结果显示其首次充电比容量可达314 mAh.g-1。经50次充放电循环后,容量保持在228 mAh.g-1,具有较好的循环稳定性。     

预处理条件对La_2O_3上过氧物种光诱导生成的影响

采用原位显微Raman光谱技术详细考察了焙烧温度和焙烧时间对La(OH)3分解制备的La2O3结构以及过氧物种光诱导生成性能的影响,结果表明,经700℃焙烧所得La2O3样品较经800℃以上长时间焙烧的样品更有利于过氧物种的生成.对La(OH)3热分解过程的原位XRD测试结果表明,焙烧温度需达到近700℃才可使La(OH)3完全转化为La2O3.在700℃焙烧的样品上,除了六方相的La2O3外,还可检出介稳态的立方相La2O3.经800℃以上长时间(≥5 h)焙烧后,介稳态的立方相La2O3将转化为稳定的六方相La2O3物种.在相同的实验条件下,立方相的稀土倍半氧化物较六方相更有利于过氧物种的光诱导生成,其原因可能源于前者含更多氧空位,因而更有利于对分子氧的吸附和活化.     

纳米晶WC-Co-Ni复合材料的制备及其电催化性能

采用喷雾干燥-气固反应法制备了具有介孔结构的纳米晶碳化钨-钴-镍(WC-Co-Ni)复合材料. 通过XRD, SEM, EDS和粒径分析等测试手段对样品的形貌、物相组成、化学成分、粒径分布进行了表征, 采用线性扫描法对WC-Co-Ni复合材料在氢析出反应中的电催化性能进行了评价. 结果表明, WC-Co-Ni复合材料由缺碳六方WC相、立方Co相和立方Ni相组成, 化学成分为W, C, Co和Ni, W与C的原子比接近1∶1; WC-Co-Ni复合材料具有空心球状或层状形貌, 其表面具有介孔结构; 样品颗粒的粒径集中分布在3～30 µm, 该区间内样品分布呈单分散性, 其中位径(d50)为10 µm; 在碱性溶液中, 复合材料对氢析出反应的电催化性能明显强于具有介孔结构的碳化钨样品.     

溶剂热法合成花朵状钴磁性粉体及表征

采用一种简单的溶剂热法成功的合成了花朵状的钴磁性粉体。通过X射线粉末衍射(XRD),扫描电子显微镜(SEM)等对样品进行物相与形貌的表征。结果表明样品为六排堆积(hcp)和面心立方结构(fcc)混合结构的钴单质,形貌为由很多个厚度约为50～150 nm的菱形花瓣构成的花朵状结构,每个花朵的尺寸约为2μm左右。采用振动样品磁强计(VSM)测试了样品的磁性能,测试表明样品在室温下表现出铁磁性,饱和磁化强度(Ms)为140 emu.g-1,剩磁(Mr)为9.4 emu.g-1,矫顽力(Hc)为280 Oe。     

多角金属纳米镍的化学液相制备、表征以及负载TiO2的光催化研究

用不同剂量的水合肼还原镍盐以制备金属镍纳米材料。通过调节添加剂(十六烷基三甲基溴化铵(CTAB),聚乙烯吡咯烷酮(PVP),聚乙二醇(PEG-20000))用量,pH值等来控制金属镍的形貌和尺寸。用X射线衍射(XRD)、扫描电子显微镜(SEM)和透射电子显微镜(TEM)对所合成样品的物相结构及形貌进行了表征,结果表明:以CTAB为添加剂,pH控制在12.4时可得到具有特殊多角结构的立方相镍纳米颗粒,其内核直径为400～600nm,分散较均匀。采用表面吸附仪测定了样品的N2吸附脱附等温线,并由BET理论模型计算出样品的比表面积。通过层层组装的方法在其表面担载TiO2,制备了镍-二氧化钛复合材料,研究了复合材料在紫外光照射下降解亚甲基兰的性能。实验结果表明,复合材料具有良好光催化性能,利用镍的磁性,还能方便地实现从催化体系中的分离,以便回收利用。     

正极材料LiNi0.5Mn1.5O4的合成及性能

采用低温固相法制备镍锰复合草酸盐，煅烧后生成的镍锰复合氧化物与Li₃CO₃混合，在空气中于700 ℃反应12 h，得到LiNi_0.5Mn_1.5O₄。通过XRD，SEM和恒电流充放电测试对样品进行了表征。XRD结果表明：复合草酸盐经390 ℃煅烧3 h，生成了多相氧化物；合成的LiNi_0.5Mn_1.5O₄为纯相，具有立方尖晶石结构。电化学测试结果表明，合成的样品在室温和高温(55 ℃)下，具有较好的电化学性能；大电流充放电时，具有良好的循环性能。     

(ZrO2)0.86(Sm2O3)0.14纳米粉体的水热法合成及其烧结体的电性能

以湿化学法制得Zr(OH)4和Sm(OH)3的共沉淀为前驱体,在碱性介质中用水热法合成了(ZrO2)0.86(sm2O3)014及(ZrO2)0.88(Sm2O3)0.12纳米粉体.将纳米粉体在较低温度(1450℃)下烧结制得了致密的固体电解质陶瓷样品,比通常高温固相反应法采用的烧结温度(＞1600℃)降低了150℃以上.XRD测定结果表明,(ZrO2)0.86(Sm2O3)0.14纳米粉体及其烧结体均为立方相,但(ZrO2)0.88(Sm2O3)0.12纳米粉体为立方相,它的烧结体为立方相和单斜相的混合相.用交流阻抗谱法、氧浓差电池法及氧泵(氧的电化学透过)法研究了(ZrO2)0.86(Sm2O3)0.14陶瓷样品在600～1000℃下的离子导电特性.结果表明,该陶瓷样品在600～1000℃下氧离子迁移数为1,氧离子电导率的最大值为3.2×10-2 S·cm-1,是一个优良的氧离子导体;它的氧泵性能明显地优于YSZ.     

新型等离子光催化剂纳米金-钛酸锌复合物的制备与光解水制氢性能

利用溶胶-凝胶法及光沉积法制备纳米金-钛酸锌(Nano Au-ZnTiO₃)复合等离子光催化剂。 采用X射线衍射(XRD)、场发射扫描电子显微镜(FE-SEM)、紫外可见漫反射光谱、荧光光谱、光电流密度、光催化制氢性能等技术手段和测试表征了样品的结构及性能。 结果表明,ZnTiO₃在900 ℃煅烧下呈立方相和六角相的混合相,其形貌呈近似球形,粒径约为50~100 nm。 由于纳米金(Nano Au)的表面等离子共振效应,Nano Au-ZnTiO₃复合材料在可见光区有较强的吸收,吸收峰位于525 nm处。 Nano Au-ZnTiO₃复合等离子光催化剂在可见光激发下呈现出优良的光催化分解水制氢活性。     

低温合成超导体Ba1-xKxBiO3

先以BaCO3和Bi2O3为原料由传统的固相反应制备纯BaBiO3,然后在低温下将用KOH-KF熔盐处理这样的拓扑反应合成了Ba1-xKxBiO3超导体.所有样品均进行了粉末X射线衍射(XRD)和磁性表征.XRD结果表明,所得Ba1-xKxBiO3样品均为纯相,且均可用赝立方晶胞指标化.磁性测量表明所有样品具有超导电性,最高超导转变温度(Tc)为30.6 K.讨论了反应时间、前驱体与熔盐质量比对超导转变温度的影响.最佳的反应条件为:反应温度450℃,反应时间4h,BaBiO3∶KOH∶KF质量比1∶5∶2.5.     

利用牛血清蛋白合成CdS纳米棒和网状纳米线

采用简单易控、对环境友好的矿化方法, 利用牛血清蛋白(BSA)做模板, 通过Cd2+与硫代乙酰胺(TAA)反应制备了形貌均一的CdS纳米棒和网状纳米线. 分别采用透射电子显微镜(TEM)、X射线能谱(EDS)、X射线衍射(XRD)、荧光(PL)发射谱和导电原子力显微镜(C-AFM)等方法对不同实验温度下制备的CdS样品的结构形貌、成分组成和光学性质及微区电子传输行为进行了表征. 结果表明: 在实验反应温度为20 ℃时, 得到的产物为单分散性好的CdS 纳米棒, 长度为250 nm, 直径为30 nm; 在50 ℃时, 得到网状CdS纳米线, 其长度为2-3 μm; CdS纳米棒和网状纳米线均为立方相闪锌矿结构. 荧光性质的测试表明, CdS纳米棒和网状纳米线具有优良的荧光性能, 电流-电压(I-V)特性的表征表明CdS纳米线具有很好的电导特性.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.