Stereoselective synthesis of hexahydroindoles and octahydrocyclohepta[b]pyrroles via gold(I)-catalyzed intramolecular 1,4-hydroamination of cyclic 1,3-dienes

The gold(I)-catalyzed intramolecular hydroamination of cyclohexa-1,3-dienes bearing an arylsulfonamide at the C-5 position proceeds in a 1,4-addition manner to afford hexahydroindole derivatives in a diastereoselective fashion and in good yields, whereas octahydrocyclohepta[b]pyrrole derivatives can be obtained from seven-membered ring substrates under the same reaction conditions. Coordination of the gold(I) species to the 1,3-diene at the double bond adjacent to the arylsulfonamide tether gave an η²-alkene gold complex. The anti-attack of the sulfonamide to the η²-alkene gold complex at the terminal position of the 1,3-diene resulted in the formation of the fused bicyclic ring with a newly formed Au-C bond at the allylic position. Allylic rearrangement of the η¹-allylgold complex followed by protodemetalation provided the fused heterobicyclic skeletons and regenerated the catalyst.     

Intramolecular Anodic Olefin Coupling Reactions and the Use of Electron-Rich Aryl Rings(1)

The utility of intramolecular anodic olefin coupling reactions involving electron-rich aromatic rings for constructing fused, bicyclic ring skeletons has been examined. Reactions involving alkoxy-substituted phenyl rings were found to benefit strongly from a 3-methoxy substituent on the phenyl ring. Although overoxidation of the bicyclic product was observed in these reactions, this problem could be minimized with the use of controlled potential electrolysis conditions when a monomethoxy phenyl ring was used and avoided entirely with the use of a vinyl sulfide moiety as the initiator when a more electron-rich phenyl ring was used. Reactions involving 4-alkoxy-substituted phenyl rings as substrates did not lead to good yields of fused products. Furan rings were found to be excellent coupling partners for the reactions and afforded products having fused, bicyclic furan ring skeletons. Cyclizations involving furans were shown to be compatible with the formation of both six- and seven-membered rings, the generation of a quaternary carbon, and the use of a variety of electron-rich olefins as the other coupling partner. It appears that the furan can serve as either the initiating group or the terminating group for the cyclizations. Finally, the reactions were shown to be compatible with the use of a pyrrole ring as one of the participants.     

A new strategy for construction of angularly fused tricyclic ring systems. Transannular bond formation of bicyclic enones via photochemical intramolecular hydrogen abstraction

Tricyclic ketones 3a, b and 7a–c having angularly fused 5-6-5 or 5-7-5 ring system have been efficiently prepared by irradiation of bicyclic enones 1 and 2.     

Gold(I)‐Catalyzed Desymmetrization of 1,4‐Dienes by an Enantioselective Tandem Alkoxylation/Claisen Rearrangement

An enantioselective alkoxylation/Claisen rearrangement reaction was achieved by a strategic desymmetrization of 1,4‐dienes under the catalysis of (S)‐DTBM‐Segphos(AuCl)₂/AgBF₄. This reaction system was highly selective for the formation of 3,3‐rearrangement products, providing cycloheptenes with various substitutions in good yield and good to excellent enantioselectivity. This transformation was further extended to bicyclic ring substrates, providing the opportunity to easily assemble 5,6‐ and 6,7‐fused ring systems.     

Synthesis of fused multicyclic compounds containing macrocycles by dienyne ring-closing metathesis and Diels-Alder reactions

Fused bicyclic compounds comprising small and large rings were synthesised by dienyne ring-closing metathesis (RCM) using Grubbs' catalyst. By taking advantage of faster small ring cyclisation compared with macrocyclisation, single isomers were obtained rather than mixtures of two isomers with different ring sizes. Using this process, various fused bicyclic compounds comprising small rings (5-7- membered) and large rings (14-17- membered) were obtained. By increasing reaction temperature and catalyst loading, the product conversion was improved in a predicted manner. This method produced E-olefins on the macrocycles with high selectivity. Also, the selectivity issues of tandem RCM for the synthesis of fused bicyclic compounds comprising small and medium rings were investigated. Lastly, the prepared bicyclic compounds with small and large rings contained 1, 3-dienes that underwent a further modification reaction, such as Diels-Alder, to produce more complex compounds. These Diels-Alder reactions produced tri- and tetracyclic compounds containing a macrocycle with single diastereomers, suggesting that the methodology demonstrated here could be a powerful tool for rapid preparation of highly complex molecules.     

α-Acyliminium ion-acetylene cyclisations

Cyclisation of acetylenic ethoxylactams 1b-12b leads to bridgehead nitrogen bicyclic ketones in excellent yields. The reaction is weakly acid-catalysed and proceeds at ambient temperature. The observed regioselectivity effect is discussed in terms of stability of exo vs endo vinyl cations and ring strain effects. The high yield conversion of N-(5-hexynyl)-ethoxy lactams 7b and 8b in the 5/8 and 6/8 fused bicyclic ketolactams 7c and 8c deserves special attention.     

Molybdenum-mediated cleavage reactions of isoxazoline rings fused in bicyclic frameworks

The molybdenum-mediated cleavage reactions of isoxazoline rings fused in bicyclic frameworks were investigated. A tandem N-O bond cleavage-retro aldol reaction of an isoxazoline ring fused in a bicyclic framework led to the cleavage of the bicyclic framework. These reactions provide a novel stereoselective synthesis of substituted cyclopentene rings, cyclopentane rings, and attached-ring systems. [reaction: see text]     

Synthesis of some novel 2-phenylpyridazino[4,5-b][1,5]thiazepines

Synthesis of some derivatives of the pyridazino[4,5-b][1,5]thiazepine ring system is reported. Thus, 5-benzyl-8-methyl-2-phenyl-2,3.4,5-tetrahydro-5H-pyridazino[4,5-b][1,5]thiazepin-9(8H)-one ( 5 ) was prepared by an intramolecular S-alkylation reaction, whereas the thiazepine ring of sulfone analogue 21 , and that of the novel tricyclic pyrrolidino fused ring system 22 was elaborated by an intramolecular C-alkylation reaction. Unexpected formation of bicyclic pyrido- and thiazine fused pyridazine systems are also discussed.     

A stable silicon congener of highly strained bicyclo[3.2.0]hepta-1,3,6-triene

A silicon-containing fused bicyclic compound with a highly strained bridgehead double bond, 2,3,6,7-tetra-tert-butyl-4-(tert-butyldimethylsilyl)-5-(tert-butyldimethylsiloxy)-5-silabicyclo[3.2.0]hepta-1,3,6-triene (2), was synthesized quantitatively by the reaction of 1,2-bis-tert-butyl-4,4-bis(tert-butyldimethylsilyl)-4-silatriafulvene (3) with di-tert-butylcyclopropenone (4) at 80 degrees C. An X-ray crystallographic analysis for 2 not only confirmed a bicyclic structure having a silacyclopentadiene (silole) ring fused with a silacyclobutene ring but also the remarkable deformation around the double bonds; the sum of the bond angles around the unsaturated bridgehead carbon was 333 degrees . The strain energy of a model 5-silabicyclo[3.2.0]hepta-1,3,6-triene was calculated at the MP2/6-31+G(d,p)//B3LYP/6-31+G(d) level (30.2 kcal/mol) to be comparable to that for parent bicyclo[3.2.0]hepta-1,3,6-triene (30.7 kcal/mol). Despite the high steric strain, 2 was stable enough to be kept intact for several months in the air. The high stability is ascribed to the effective steric protection of the ring system by the bulky substituents.     

Etude dans la série des pyrrolidinones: Dérivés de l'acide N-méthylol pyroglutamique; synthèse d'un nouveau système bicyclique,la dioxo-(1,5) pyrrolidino[2,1-c]oxazolidine

1-Hydroxymethyl-5-oxopyrrolidine-2-carboxylic acid and its methyl ester have been synthesized and the reactivity of their N CH₂ O H group has been studied. Depending upon the reactant, they react by breaking their N C or C O or O H bond. A new simple bicyclic system, an azlactone fused to a lactam ring, has been obtained. Some of these new molecules display antifungal properites.     

Allenyl azide cycloaddition chemistry. synthesis of pyrrolidine-containing bicycles and tricycles via the possible intermediacy of azatrimethylenemethane species

Thermolysis of 5-azidoallenes bearing a C(1) methyl group and either an aryl ring or an alkene on C(1) furnishes tricyclic (from the aryl substrates) or bicyclic (from the alkenyl substrates) pyrrolidine products following formal H-CN addition across an intermediate imine. High levels of diastereoselectivity are observed in all cases studied. This reaction cascade presumably passes through unobserved triazoline and azatrimethylenemethane diyl intermediates en route to product.     

Stereo‐ and Regioselective Synthesis of Tricyclic Spirolactones by Diastereoisomeric Differentiation of a Collective Key Precursor

A general, parallel, and collective synthesis of 5/5/5‐ and 5/5/6‐ring fusion topologies of tricyclic spiranoid lactones through the controlled cyclizations of easily accessible, common key precursors is described. The rapid composition of key cycloalkyl methylene precursors yielded an assembly of bicyclic diastereoisomeric iodolactones, which were individually converted into a wide range of tricyclic, angularly fused spiranoid lactones in a regioselective and stereodirected fashion through the diastereoisomeric differentiation of a collective key precursor. The critical stereochemical assignment of the bicyclic starting materials, as well as the tricyclic targets, was confirmed by X‐ray crystal structure determination.     

Cyclooctatrienes from pyran-2-ones via a tandem [4+4]-photocycloaddition/decarboxylation process

Irradiation of pyran-2-ones bearing pendent furans in aqueous MeOH followed by heating furnished fused bicyclic products containing a cyclooctatriene ring.     

Synthesis of tetrahydrothiopyrano[3,2-c]pyrazole derivatives from 3-thianones

The synthesis of bicyclic pyrazoles and pyrazolones in which the fused ring contains a sulfur atom in different oxidation states is reported.     

Palladium-catalyzed synthesis of 2,1'-disubstituted tetrahydrofurans from gamma-hydroxy internal alkenes. Evidence for alkene insertion into a Pd-O bond and stereochemical scrambling via beta-hydride elimination

Palladium-catalyzed reactions of gamma-hydroxy internal acyclic alkenes with aryl bromides afford 2,1'-disubstituted tetrahydrofurans in good yields with diastereoselectivities of 3-5:1. The analogous transformations of substrates bearing internal cyclic alkenes afford fused bicyclic and spirocyclic tetrahydrofuran derivatives in good yields with excellent diastereoselectivities (>20:1). A series of deuterium labeling experiments indicate that the origin of the modest diastereoselectivity in reactions of acyclic internal alkene substrates likely derives from a series of reversible beta-hydride elimination and sigma-bond rotation processes that occur following a rare intramolecular alkene syn-insertion into an intermediate Pd(Ar)(OR) complex. In addition, these studies shed light on the chemoselectivity of insertion, suggesting that the alkene inserts into the Pd-O bond in preference to the Pd-C bond.     

Synthesis and biological evaluation of new bicyclic fluorinated uracils through ring-closing metathesis

Two families of bicyclic fluorinated uracils have been prepared starting from a gem-difluorinated unsaturated nitrile, by means of a ring-closing metathesis reaction to form the new ring, which is fused at the C-5/C-6 or N-1/C-6 positions of the uracil moiety. The selective formation of olefin regioisomers in the metathesis process can be controlled according to the reaction conditions (catalyst, solvent, and temperature). The acaricidal activities of the resulting compounds have also been investigated.     

Rapid synthesis of medium-ring fused polycarbocyclic systems by rearrangement of carbenoid-derived oxonium ylides

Tandem carbenoid generation, ylide formation and [2,3]-rearrangement is a powerful method for the construction of bicyclic and linearly fused tricyclic systems containing a seven-membered ring.     

A Stepwise Annulation for the Transformation of Cyclic Ketones to Fused 6 and 7‐Membered Cyclic Enimines and Enones

The efficient construction of functionalized polycyclic structures is an important objective in organic synthesis. Herein, we disclose a three‐step “[2 + n]” annulation method for the transformation of cyclic ketones to fused enimines and enones. The method relies on the Suzuki coupling reaction and the amide reductive alkenylation reaction. A series of fused bicyclic (6/6, 6/7, 8/7) and tricyclic (6/6/6; 6/6/7, 6/5/7) ring systems bearing an α,β‐enimine or an α,β‐enone functionality have been synthetized in good overall yields.     

Practical synthesis of 3-bromo-5,6-dihydropyridin-2-ones via β,γ-unsaturated α-bromo-ketene/imine cycloaddition

An approach to 3-bromo-4-alkyl-6-aryl-5,6-dihydropyridin-2-ones and 3-bromo-5-ethyl-6-aryl-5,6-dihydropyridin-2-ones starting from β,γ-unsaturated α-bromoketenes and imines is reported. The presence of a bromine atom on the double bond allows performing aziridination or bromine displacement with an amine. The reaction gave fused bicyclic N-allyl-aziridines or 3-amino-substituted 5,6-dihydropyridin-2-ones, depending on the substituents on the six-membered ring.