La掺杂对Bi4Ti3O12薄膜铁电性能的影响

利用Sol-Gel法在Pt/Ti/SiO₂/Si衬底上制备出Bi₄Ti₃O₁₂和Bi_3.25La_0.75Ti₃O₁₂薄膜，研究了La掺杂对Bi₄Ti₃O₁₂薄膜的晶体结构、铁电性能和疲劳特性的影响，发现La掺杂没有改变Bi₄Ti₃O₁₂薄膜的基本晶体结构，并且提高了Bi₄Ti₃O₁₂铁电薄膜的剩余极化值和抗疲劳性能，对La掺杂改善Bi₄Ti₃O₁₂铁电薄膜性能的机理进行了讨论. 关键词： 铁电性能 4Ti₃O₁₂薄膜')" href="#">Bi₄Ti₃O₁₂薄膜 3.25La_0.75Ti₃O₁₂薄膜')" href="#">Bi_3.25La_0.75Ti₃O₁₂薄膜 sol-gel法 La掺杂     

Si基Bi3.25La0.75Ti3O12铁电薄膜的制备与特性研究

采用Sol-Gel工艺低温制备了Si基Bi_3.25La_0.75Ti₃O₁₂铁电薄膜.研究了退火温度对薄膜微观结构、介电特性与铁电性能的影响.500℃退火处理的Bi_3.25La_0.75Ti₃O₁₂薄膜未能充分晶化，晶粒细小且有非晶团聚，介电与铁电性能均较差.高于550℃退火处理的Bi_3.25La_{0.75 关键词： 铁电薄膜 3.25}La_0.75Ti₃O₁₂')" href="#">Bi_3.25La_0.75Ti₃O₁₂ Sol-Gel工艺     

Si基Bi4Ti3O12铁电薄膜的制备与特性研究

采用sol-gel工艺, 在分层快速退火的工艺条件下成功地制备了高质量Si基Bi_{4Ti3O12铁电薄膜. 研究了Si基Bi4Ti3O12薄膜的生长行为、铁电性能、C-V特性和疲劳特性. 研究表明: Si基Bi4Ti3O12薄膜具有随退火温度升高沿c轴择优生长的趋势; 退火温度通过影响薄膜的晶粒尺寸、生长取向和薄膜中载流子的浓度来改变Si基Bi关键词： sol-gel法 铁电薄膜 4Ti3O12')" href="#">Bi4Ti3O12 C-V特性}     

SrBi2Ta2O9/Bi4Ti3O12复合铁电薄膜的制备与特性研究

采用溶胶凝胶工艺在p-Si衬底上制备了SrBi₂Ta₂O₉/Bi₄Ti₃O₁₂复合铁电薄膜. 研究了SrBi₂Ta₂O₉/Bi₄Ti₃O₁₂复合薄膜的微观结构与生长行为、铁电性能和疲劳特性. 研究表明: Si衬底Bi₄Ti< 关键词： 2Ta₂O₉')" href="#">SrBi₂Ta₂O₉ 4Ti₃O₁₂')" href="#">Bi₄Ti₃O₁₂ 复合铁电薄膜 溶胶凝胶工艺     

Ag/Bi4Ti3O12栅n沟道铁电场效应晶体管制备及存储特性

在溶胶-凝胶工艺获得高质量Bi₄Ti₃O₁₂薄膜的基础上 ，制备了Ag/Bi₄Ti₃O₁₂栅n沟道铁电场效应晶体管. 研 究了Si基Bi₄Ti₃O₁₂薄膜的生长特性及其对铁电薄膜/ 硅的界面状态和铁电场效应晶体管存储特性的影响. 研究表明，在合理的工艺条件下可以获 得具有较高c-轴择优取向的纯钙钛矿相Si基Bi₄Ti₃O₁₂ 铁电薄膜并有利于改善Bi₄Ti₃O₁₂/Si之间的界面特性; 顺时针回滞的C-V特性曲线和C-T曲线表明Ag/Bi₄Ti₃O_{12栅n沟道铁电场效应晶体管具有极化存储效应和一定的极化电荷保持能力; 器件的转移(I< sub>sd}-V_G)特性曲线显示Ag/Bi₄Ti₃O_{12栅n沟道铁电场效应晶体管具有明显的栅极化调制效应. 关键词： 铁电场效应晶体管 4}Ti₃O₁₂')" href="#">Bi₄Ti₃O₁₂ 存储 特性 溶胶-凝胶工艺     

氧压对SrTiO3和SrNb0.2Ti0.8O3薄膜晶格参数的影响及激光感生热电电压效应

采用脉冲激光沉积技术制备了SrTiO₃和SrNb_0.2Ti_0.8O₃薄膜.X射线衍射分析表明在LaAlO₃(100)单晶平衬底上生长的SrTiO₃及SrNb_0.2Ti_0.8O₃薄膜是沿［001］取向的近外延生长.随着氧压在一定范围内逐渐增大,SrTiO₃薄膜的晶格参数减小,而SrNb_0.2Ti_0.8O₃薄膜的晶格参数先减小后增大.同时摸索出制备具有二维电子气超晶格(SrTiO₃/SrNb_0.2Ti_0.8O₃)_L的最佳氧压为1.0×10^-2Pa.另外在LaAlO₃(100)倾斜衬底上制备的SrNb_0.2Ti_0.8O₃薄膜中观察到激光感生热电电压效应. 关键词： 0.2Ti_0.8O₃薄膜')" href="#">SrNb_0.2Ti_0.8O₃薄膜 晶格参数 激光感生热电电压 脉冲激光沉积     

CaCu3Ti4O12块材和薄膜的巨介电常数

用固相反应法和脉冲激光沉积(PLD)制备了CaCu₃Ti₄O₁₂块材和薄膜，获得了相对介电常数ε′（1kHz,300K)高于14000的介电特性，是目前该体系最好的结果.报道了(00l)取向高质量CaCu₃Ti₄O₁₂外延薄膜及其介电性质.C aCu₃Ti₄O₁₂相对介电常数ε′在100—300K温度范围 内 关键词： 3Ti₄O₁₂')" href="#">CaCu₃Ti₄O₁₂ 巨介电常数 PLD     

(Bi,La)4Ti3O12-Sr(Bi,La)4Ti4O15共生结构铁电材料性能研究

采用固相烧结工艺，制备了不同La掺杂量(x=0.00，0.25，0.50，0.75，1.00，1.25和1.50) 的(Bi, La)₄Ti₃O₁₂-Sr(Bi, La)₄Ti4O₁₅ (SrBi_8-xLa_xT i₇O₂₇)共生结构铁电陶瓷样品.用x射线衍射对其进行微结构分析 ，并测量铁 关键词： 4Ti₃O₁₂-SrBi₄Ti₄O₁₅')" href="#">Bi₄Ti₃O₁₂-SrBi₄Ti_{4O15 La掺杂 铁电性能 居里温度 弛豫铁电}     

Yb:Y2－2xLa2xO3激光透明陶瓷的光谱性能

对一种低温易烧结的Yb:Y_2-2xLa_2xO₃激光透明陶瓷的光谱性能进行了初步研究，Yb:Y_2-2xLa_2xO₃激光透明陶瓷具有宽的吸收带和大的吸收截面，在最强的吸收峰977nm处吸收截面达4.0×10^-20cm²；其荧光发射寿命为1.1ms，发射截面在1033nm处为1.0×10^-20cm²，在1077nm处为0.7×10^-20cm².Yb:Y_2-2xLa_2xO₃陶瓷的各项光学性能指标接近或达到单晶的指标. 关键词： 氧化镧钇 激光陶瓷 低温烧结 光谱性能     

CaCu3Ti4O12陶瓷的微观结构及直流导电特性

采用传统固相反应法制备了CaCu₃Ti₄O₁₂陶瓷.XRD证实其CaCu₃Ti₄O₁₂相;SEM观察到明显的晶粒晶界结构,晶界区亦由小晶粒构成;结合EDS结果,判定晶界区小晶粒为CuO.在较宽的温度范围内,CaCu₃Ti₄O₁₂陶瓷的介电常数保持在10⁵左右;当频率为10³ Hz温度小于150 K时,介电常数迅速下降.在173—373 K温度范围内,通过其I-V特性,得到CaCu₃Ti₄O₁₂陶瓷直流电导随温度的变化：直流电导与温度的关系可分为三部分,对应的活化能分别为0.681 eV,0.155 eV和0.009 eV,这与CuO陶瓷直流电导活化能一致.可以认为晶界区的CuO小晶粒在CaCu₃Ti₄O₁₂陶瓷的直流电导中占主导,这为解释CaCu₃Ti₄O₁₂陶瓷反常的介电性能提供了新的思路. 关键词： 3Ti₄O₁₂')" href="#">CaCu₃Ti₄O₁₂ 微观结构 直流电导 介电特性     

Ferroelectric Properties of Bi3.25La0.75Ti3O12 Thin Films Crystallized inDifferent N2/O2 Ambients

Bi3.25La0.75 Ti3O12 （BLT） ferroelectric thin films are deposited by sol-gel method and annealed for crystallizaion in total l eccm N2/02 mixed gas with various ratio at 750℃ for 30rain. The effect of crystallization ambient on the structural and ferroelectric properties of the BLT films is studied. The growth direction and grain size of BLT film are revealed to affect ferroeleetric properties. Alter the BLT film is annealed in 20%O2, the largest P~ value is obtained, which is ascribed to an increase of random orientation and large grain size. The fatigue property is improved with the concentration of oxygen in the ambient increasing, which is ascribed to annealing in the ambient with high concentrated oxygen adequately decreasing the defects related to lack of oxygen.     

Preparation of WO3 nanoparticles and application to NO2 sensor

WO₃ nanoparticles were prepared by evaporating tungsten filament under a low pressure of oxygen gas, namely, by a gas evaporation method. The crystal structure, morphology, and NO₂ gas sensing properties of WO₃ nanoparticles deposited under various oxygen pressures and annealed at different temperatures were investigated. The particles obtained were identified as monoclinic WO₃. The particle size increased with increasing oxygen pressure and with increasing annealing temperature. The sensitivity increased with decreasing particle size, irrespective of the oxygen pressure during deposition and annealing temperature. The highest sensitivity of 4700 to NO₂ at 1 ppm observed in this study was measured at a relatively low operating temperature of 50 °C; this sensitivity was observed for a sensor made of particles as small as 36 nm.     

退火氧压对YBa2Cu3O7-x薄膜中的激光感生热电电压效应的影响

测量了在不同氧压下退火生长的YBa₂Cu₃O_7-x(YBCO)薄膜中的激光感生热电电压(LITV)信号,发现随退火氧压的增大可使LITV信号的峰值有2—4倍的增强,并且变化趋势与薄膜热电势的各向异性随氧含量的变化规律相同.波长在473—808nm范围内的连续激光辐照,在5000Pa的氧压下退火生长的YBCO薄膜中探测到的LITV信号最大;而紫外脉冲激光辐照时,LITV信号的最大值出现在退火氧压为10⁵Pa 关键词： 2Cu₃O_7-x薄膜')" href="#">YBa₂Cu₃O_7-x薄膜 激光感生热电电压 各向异性的Seebeck系数 氧含量     

电沉积－退火工艺制备铜铟硒太阳能电池薄膜及表征

利用电沉积硒气氛下后续退火的工艺制备出了高结晶质量的铜铟硒薄膜．通过X射线衍射、扫描电子显微镜、拉曼光谱、紫外-可见-近红外光谱和阻抗谱技术对退火后的铜铟硒薄膜进行表征,结果表明530 oC硒化退火后的铜铟硒薄膜具有四方的黄铜矿晶体结构,晶粒尺寸达到微米量级,光学带隙为0.98 eV,经过KCN溶液去除表面高导电性的铜硒化合物后铜铟硒薄膜的载流子浓度在10¹⁶ cm^-3量级．利用硒化退火的铜铟硒薄膜作为光吸收层制备了结构为AZO/i-ZnO/CdS/CIS/Mo/glass的太阳能电池,在AM1.5光照条件下对其电流-电压特性测试后发现面积为0.2 cm²的电池可以达到0.96％的能量转换效率,并对限制电池效率的原因做出了初步的分析和讨论.     

Characteristics of electron beam evaporated nanocrystalline SnO2 thin films annealed in air

Tin oxide (SnO₂) thin films (about 200 nm thick) have been deposited by electron beam evaporation followed by annealing in air at 350-550 °C for two hours. Optical, electrical and structural properties were studied as a function of annealing temperature. The as-deposited film is amorphous, while all other annealed films are crystalline (having tetragonal structure). XRD suggest that the films are composed of nanoparticles of 5-10 nm. Raman analysis and optical measurements suggest quantum confinement effects that are enhanced with annealing temperature. For instance, Raman peaks of the as-deposited films are blue-shifted as compared to those for bulk SnO₂. Blue shift becomes more pronounced with annealing temperature. Optical band gap energy of amorphous SnO₂ film is 3.61 eV, which increases to about 4.22 eV after crystallization. Two orders of magnitude decrease in resistivity is observed after annealing at 350-400 °C due to structural ordering and crystallization. The resistivity, however, increases slightly with annealing temperature above 400 °C, possibly due to improvement in stoichiometry and associated decrease in charge carrier density.     

Annealing effects on the optical and structural properties of Al2O3/SiO2 films as UV antireflection coatings on 4H-SiC substrates

Al₂O₃/SiO₂ films have been prepared by electron-beam evaporation as ultraviolet (UV) antireflection coatings on 4H-SiC substrates and annealed at different temperatures. The films were characterized by reflection spectra, ellipsometer system, atomic force microscopy (AFM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS), respectively. As the annealing temperature increased, the minimum reflectance of the films moved to the shorter wavelength for the variation of refractive indices and the reduction of film thicknesses. The surface grains appeared to get larger in size and the root mean square (RMS) roughness of the annealed films increased with the annealing temperature but was less than that of the as-deposited. The Al₂O₃/SiO₂ films maintained amorphous in microstructure with the increase of the temperature. Meanwhile, the transition and diffusion in film component were found in XPS measurement. These results provided the important references for Al₂O₃/SiO₂ films annealed at reasonable temperatures and prepared as fine antireflection coatings on 4H-SiC-based UV optoelectronic devices.     

Effect of grain size on the magnetic properties of superparamagnetic Ni0.5Zn0.5Fe2O4 nanoparticles by co-precipitation process

Ni_0.5Zn_0.5Fe₂O₄ (NZFO) spinel-type nanoparticles were directly fabricated by the chemical co-precipitation process using metal nitrate and acetate as precursors since nitrogen and carbon would be taken away in the forms of oxynitride and oxycarbide, respectively, after the precursors were annealed and then investigated in detail by employing X-ray diffraction (XRD), magnetic measurement and Raman spectroscopy. XRD analysis indicates that the as-prepared nanocrystals are all of a pure cubic spinel structure with their sizes ranging from 20.8 to 53.3 nm, as well as peaks of some samples shifting to lower angles due to lattice expansion. Calculations from the derived XRD data indicate that the activation energy is 30.83 kJ/mol. The magnetic measurements show that these samples are superparamagnetic. The saturation magnetization increases with annealing temperature, which may be explained by super-exchange interactions of Fe ions occurring at A- and B-sites. The variation of coercivity with particle size is interpreted on the basis of domain structure and crystal anisotropy. Furthermore, these nanoparticles exhibit a redshift phenomenon at lower temperatures seen in the Raman spectra, which could be related to ionic substitution.     

Cathode luminescence characteristics of ZnGa2O4 phosphor thin films with the doped activator

The zincgallate (ZnGa₂O₄) phosphor thin film was grown using RF magnetron sputtering system at various process parameters. A ZnGa₂O₄ phosphor thin film was deposited on Si(1 0 0) substrate and annealed by a rapid thermal processor (RTP). The X-ray diffractometer (XRD) patterns indicate that the Mn-doped ZnGa₂O₄ phosphor thin film shows a (3 1 1) main peak and a spinel phase. A ZnGa₂O₄ phosphor thin film has better crystallization due to increased substrate, annealing temperature and deposition time. Also the ZnGa₂O₄:Mn phosphor thin film shows green emission (510 nm, ⁴T₁→⁶A₁), and the ZnGa₂O₄:Cr phosphor thin film shows red emission (705 nm, ⁴A₂→⁴T₂).     

Annealing effects on the structure and electrical characteristics of amorphous Er2O3 films

Amorphous Er 2 O 3 films are deposited on Si (001) substrates by using reactive evaporation.This paper reports the evolution of the structure,morphology and electrical characteristics with annealing temperatures in an oxygen ambience.X-ray diffraction and high resolution transimission electron microscopy measurement show that the films remain amorphous even after annealing at 700 C.The capacitance in the accumulation region of Er 2 O 3 films annealed at 450 C is higher than that of as-deposited films and films annealed at other temperatures.An Er 2 O 3 /ErO x /SiO x /Si structure model is proposed to explain the results.The annealed films also exhibit a low leakage current density (around 1.38 × 10 4 A/cm 2 at a bias of 1 V) due to the evolution of morphology and composition of the films after they are annealed.