电化学法制备高热稳定性锐钛矿型纳米TiO2

Titanium alkoxides were prepared by anodic dissolution of metallic titanium in absolute ethanol in the presence of HN(C₂H₅)₂*HCl (electro－conductive additives).The solution was directly hydrolyzed to prepare nanocrystalline of TiO₂ (about 10nm)by a sol－gel process.The precursor gels was calcined at T=450 ℃ and 720 ℃for 30 min,and nanocrystalline of TiO₂ (anatase) with high textural and thermal stability was obtained.FTIR,XRD,TEM,were used to characterize the structure of titanium alkoxides and nanocrystalline of TiO₂.The characteristics of nanocrystalline of TiO₂ was depended on the properties of titanium alkoxides.The Ti(OEt)₄ as a source of titanium yielded the best textural and thermal stability nanocrystalline of TiO₂.     

新生态二氧化锰的性质及pH值影响除砷效果的研究

Fresh MnO₂ was prepared by oxide reduction using KMnO₄ and MnSO₄. The structure and property of the products were characterized by TEM, SEM, XRD and BET, and the effect of pH value was studied on the removal of both As(Ⅴ) and As(Ⅲ). The results show that δ-MnO₂ is spherical, its specific surface is 325 m²·g^-1 with lots of hydroxyl on the surface. Adsorption of fresh MnO₂ of As(Ⅲ) was a corporate action of both oxide reaction and electrostatic adsorption, but the adsorption of As(Ⅴ) was due to electrostatic and anion exchange adsorption.     

水热改性对NiMo/γ-Al2O3加氢脱氮催化剂结构及性能的影响

The influence of hydrothermal modification on the structure and hydrodenitrogenation (HDN) activity of NiMo/γ-Al₂O₃catalyst was studied in the range 140～180 ℃. The experimental results indicated that the hydrodenitrogenation reaction rate of pyridine was accelerated using the NiMo/γ-Al₂O₃catalyst synthesized via hydrothermal route due to the change of the structure, the increase of the amount of Mo and Ni and the rise of the specific surface area. The change of the structure of catalysts was enhanced at higher hydrothermal temperature, producing NiMo/γ-Al₂O₃catalyst with better HDN activity.     

碱土金属掺杂纳米TiO2催化剂的制备与光催化活性的评价

The nanometer TiO₂ were prepared by the hydrolyze-gel method and fellowed by doping alkaline-earth metals (Mg, Ca, Sr, Ba). XRD, SEM, diffuse reflection spectra were used to investigate their characteristices. The result indicates that the average particles size of the TiO₂ is about 80 nm and keep uniformity in distributing. The product was mainly anatase in 300～400 ℃ calcinations, the einstein shift of absorption spectrum was observed after doping the alkaline-earth metals. The best mole percentages of Mg, Ca, Sr and Ba are 0.5%, 1.0%, 1.5%, 1.5% respectively. Under the same reaction conditions, it is more effective to the UV-catalyed degradation reaction that the catalysts containing Mg and Ca were calcined at 300 ℃ for 1h or containing Sr and Ba were calcined at 400 ℃ for 1 h. The photocatalystic activity is considerably depondent on pH and the concentration of the oxidant. Using the sunlight to do the degradation experimental, the result also show that the doping catalysts has higher degradation efficiency than that of pure TiO₂.     

纳米二氧化钛粉末的溶胶-凝胶法合成及晶相转化

Nanosized TiO₂ powder with anatase and rutile structures was synthesized by a sol-gel method using TiCl₄ ethanol solution as a precursor.The grain size of TiO₂ powder was about 63nm after the precursor was calcined at 600℃ for 2 hours .The experimental techniques of XRD,TEM and Particle Distribution were used to characterize the synthesized specimens. Various special effects were investigated for their contribution to crystal structure and the size of TiO₂ powder .The formation of anatase as well as the rutile phase of TiO₂ was indicted from the XRD when the reaction temperature was above 30℃ and when the sol was irradiated by infrared rays .However, an anatase TiO₂ powder formed after the heat treatment of the dried gel in a temperature range from 300℃ to 500℃.Under the vacuum drying and with the calcined time below 3hours ,the anatase phase was gained .As well as with the increase of gelatinizing time, the anatase TiO₂ powder was obtained.     

分子内桥连有机钴配合物的合成及热稳定性研究

The intramolecularly bridged alkyl cobaltic complexes are one of important coenzyme B₁₂ model coplexes. In this paper, study on the thermolytic reaction of aqua(3-bromopropyl)cobaloximes in solution revealed that a new intramolecularly bridged alkyl cobaloximes complex was formed and the reaction is influenced by tempertature and solvent. Adding cyclodxtrin has no obvious effect to the rate of the reaction, but various products with different axial bases were obtained. The intramolecularly bridged alkyl cobaloxime complex (bromo(O-trimethylene-dimethy- lglyoxime)(dimethylglyoximate)cobalt(Ⅲ)) was characterized by EA and ESI-MS. Thermogravimetric analysis of this complex found that a carbon radical that from homolysis of the Co-C bond is retained in the proximity of Co^Ⅱ- complex, which is very similar to the behavior of coenzyme B₁₂.     

TiO2胶粒在铝合金表面的电泳沉积及所制薄膜的光催化性能研究

TiO₂ membranes were prepared on aluminum-alloy thin plates by electrophoretic deposition and dip coating in a colloid solution of TiO₂, respectively. The photocatalytic activity of TiO₂ membrane was compared using ethylene as reactant, and the crystal and morphological structure of the membrane were characterized by XRD and SEM. The results showed that a more compact membrane with high loading of TiO₂ but lower photocatalytic activity of unit TiO₂ mass was obtained by electrophoresis compared with dip coating method. The addition of polyethylene glycol (PEG) to the sol of TiO₂ could improve the specific photocatalytic activity (ethylene conversion per unit mass TiO₂ and unit area of membrane piece) of the electrophoresis-membrane prepared from the sol, but could not change the specific photocatalytic activity of the dip-coating membrane from the sol. The ethylene conversion on the electrophoresis membrane prepared from the sol containing PEG (50 g·L^-1) was 9 times of that on the dip coating membrane. The effect of PEG on the properties of electrophoresis-membrane of TiO₂ was attributed to the change of electrokinetic properties of sol. Addition of PEG decreased ζ potential value of the sol and the mobility of the sol particle, increased viscidity of the colloid, thus decreasing both the electrophoresis deposition velocity of colloid particles and the electroosmosis velocity of diffuse layer of colloid particles. These favored the formation of a low compact and porous membrane on the electrode in electric field, and thus increasing the availability of TiO₂ in photocatalytic process.     

掺钇锆酸锶-TiO2复合光催化剂的制备及性能研究

SrZrO₃ particles were prepared by a co-precipitation method and Sr(Zr_1-xY_x)O_3-δ -TiO₂ composite particles were then synthesized by Sr(Zr_1-xY_x)O_3-δ and titanium dioxide. The composite particles were characterized by XRD, SEM, FTIR and TG-DTA techniques. The photocatalytic degradation of methylene blue (MB) in aqueous solution was used as a probe reaction to evaluate the photocatalytic activity of the composite particles. The effect of the preparation method for SrZrO₃, doping content of yttrium and TiO₂ amount in the composite particles on the photocatalytic activity of composite particles was also discussed. The results show that the methylene blue solution could be completely degraded by Sr(Zr_1-xY_x)O_3-δ -TiO₂ composite particles under UV-light or visible light irradiation. The photocatalytic activity of composite particles was higher than that of pure TiO₂. The fast recombination of photogenerated electrons and holes were restrained by the heterojunction formed in composite particles. The particle of SrZrO₃ prepared by co-precipitation was small, and the photocatalytic activity of composite particles prepared from this kind of SrZrO₃ was higher than that of particles prepared by solid sintering method. The best doping content of yttrium is 5%. The optimal content of TiO₂ in composite particles is 90wt%, 70wt%, respectively under UV-light and visible light irradiation, the degradation rates of MB are 98.8% and 93.5% , respectively after 50 min irradiation.     

N530-OT-煤油-HCl反萃分散组合液膜体系迁移和分离铜的研究

The transport and separation of copper(Ⅱ) from waste water by a N₅₃₀-OT-kerosene-HCl strip dispersion hybrid liquid membrane system was studied. The influence of penetrant OT, N₅₃₀ concentration, pH in feed phase, membrane area, HCl concentration in stripping phase, and volume ratio of membrane phase to stripping phase on transport and separation were also investigated. The experiments demonstrate that Cu(Ⅱ) can be transported selectively from the binary Cu(Ⅱ) and Fe(Ⅲ) solution to stripping phase and that the transport percentage of Cu(Ⅱ) exceeds 93.8% and Fe(Ⅲ) is only 1.8% after transport of 6 hours.     

锐钛矿型TiO2水溶胶的低温制备及其表征

Anatase titanium dioxide hydrosol was prepared at low temperature by a simple method. The title material was characterized by TEM, XRD, FTIR and BET, respectively. The photocatalytic activity of the as-prepared TiO₂ was evaluated by the degradation of methyl orange solution under sunlight and the photocatalytic oxidation of acetone in air. The results showed that the titanium dioxide hydrosol was composed of anatase phase with average grain size of about 7 nm, and the crystallinity became more perfect with the increase of temperature. The BET surface areas were more than 220 m²·g^-1 for these samples. It is found that the photocatalytic activity was much better for the higher heat processing temperature. Especially, the photocatalytic activity of the sample with a heat treatment of 110 ℃ was better than that of P25. In addition, TiO₂ hydrosol also possessed good photocatalytic activity under the sunlight illumination.     

纳米TiO2-ZnO复合材料的合成、结构与光催化性能

Using ZnSO₄ and TiCl₄ as raw materials， nanometric TiO₂-ZnO (ZnTiO₃) is prepared at 180℃，0.8MPa by hydrothermal method. The effects of the reaction temperature and time on the nanometric TiO₂-ZnO are also dis-cussed. XRD shows that the product is TiO₂-ZnO (ZnTiO₃) with noncrystal phase， and it changes to rhombic form above 870℃. TEM measurement indicates that the TiO₂-ZnO is spherical particles， and the average diameter of the particles is 20nm. The UV light absorption properties are detected by UV spectrophotometer. The results show that the nanometric TiO₂-ZnO has strong absorption at 200～370nm and at visible region. Photodegradation of dyes in an aqueous solution is investigated using nanometric TiO₂-ZnO as a photocatalyst. The results show that after 60min illumination， the decolorization rate of the acidic red B and acidic black 234 dye can be arrived at 100%.     

电沉积HA/TiO2复合涂层的结合强度和热稳定性研究

HA/TiO₂ composite coating were fabricated via adding TiO₂ powder in the electrolyte by electrodeposition. The influence of current density and deposition time on the content of TiO₂ in the coating, the influence of the content of TiO₂ in the coating on the bonding strength of coating and the influence of sintering temperature on the structure and the bonding strength of coating were investigated. The experiment results show that the content of TiO₂ in the coating increase with reducing the current density and prolonging the deposition time, the bonding strength improve with increasing the content of TiO₂ in the coating, which can obtain 18.7 MPa when the weight percent TiO₂ in the coating attain 72.2 %. The addition of TiO₂ in the coating reduces the thermal expansion coefficient of the coating, improves the bonding strength of coating and changes the fracture mechanism of the coating from adhesion failure to cohesive failure. HA in the composite coatings is decomposed by the catalysis reaction of TiO₂ at the temperature of sinter 850 ℃. Differential scanning calorimetry and X-ray diffractometry analyses showed that the chemical reaction between HA and TiO₂ lead to the product are α-TCP and CaTiO₃ at the temperature of sinter 1200 ℃. In order to prevent the coating from decomposing and attain hign bonding strength, the sintering temperature should be less than 820 ℃.     

混合溶剂前体法制备纳米CuO粉体及其性能表征

Nano-CuO was prepared by heating nano-Cu₂(OH)₂CO₃ precursors in different calcination temperatures. The precursor was synthesized from water-alcohol mixed solution of Cu(Ac)₂ using mixed solution of NaOH and Na₂CO₃as precipitants. XRD, FT-IR, TEM, TG-DTA and surface area measurement techniques were used to investigate the properties of the CuO powder. The results show that the spherical, well dispersed nano-CuO powder with the average size of 15 nm and higher catalytic activity for H₂O₂ decomposition was obtained at 300 ℃. With the increasing of calcination temperature, crystal of CuO grows up, agglomeration of the powder becomes heavier and catalytic activity decreases. FT-IR patterns revealed that the vibration fine structure of Cu-O bond in nano-CuO powder disappears and main absorption is red-shifted with the average size of nano-CuO reducing.     

碳包覆LiFePO4的一步固相法制备及高温电化学性能

Carbon coated LiFePO₄ cathode material was synthesized by one-step solid-state reaction and characterized by X-ray diffraction (XRD), field-emission-scanning electron microscope (FESEM). Electrochemical performances of the material as cathode in lithium-ion battery were investigated at medium and elevated temperature (30 and 55 ℃) by galvanostatic charge-discharge and A.C. impedance tests. The results show that carbon coated LiFePO₄ powder exhibits a well-crystallized olivine structure and spherical morphology with an average particle size of about 500 nm. Galvanostatic charge-discharge tests show that the reversible discharge capacity at 1 C and 1.5 C rates was improved from 121 and 105 mAh·g^-1 at 30 ℃ to 136 and 123 mAh·g^-1 at 55℃, respectively, while the enhancement of high temperature on electrochemical performance is less obvious at a rate lower than 0.5 C. Impedance spectra analyses indicate that the cathode material has a remarkably higher lithium-ion diffusivity at 55 ℃ than that at 30 ℃, which improves the electrochemical performance at high temperature.     

湿法水解制备可见光催化剂N/TiO2

The N/TiO₂ was prepared by wet hydrolyzation method. The photocatalytic decomposition of benzoic acid solution was carried out under simulated sun light; the photocatalytic activity was 2.47 times of TiO₂. The products were characterized by XRD, SPS, EFISPS and XPS, respectively. The results of XRD showed that the N could restrain the crystallization transformation of TiO₂ from anatase to rutile. The N/TiO₂ was still n-type semiconductor, and the absorbance wavelength appeared red-shifted by N-doping. The band gap of N/TiO₂ was decreased to 2.7 eV. The amount of doped-N is about 0.94at.%. The binding energy of N1s are 396.62 eV (Ti-N bonds, β-N) and 400.87 eV (N-N bonds, γ-N₂), respectively, and the photocatalytic activity of N/TiO₂ under visible light is related to the β-N. The N atoms replace the O of the TiO₂ and form the Ti-N bonding.     

正钛酸胶溶法制纳米TiO2薄膜及性能表征

The Nanometer TiO₂ thin film was prepared by sol method with titanic acid precursor from industrial TiOSO₄ solution. The characters of the sol and the factors affecting sol formation were investigated by ζ electricity potential. The crystalline structure, particle size, appearance shape and photo-catalytic activity were characterized by XRD, SEM, TEM and spectrophotometer. The study show: (1) pH value and HNO₃concentration effected importantly on the forming process and stability of the sol. The thermodynamic condition for forming sol is pH=0.5～1.5. The lower the HNO₃concentration,the more stable the sol. The ζ electricity potential of the sol, with 5% HNO₃as gluing reagent, was up to 48 mV, and shelf life of the sol could more than 10 months. (2) The film, made from the sol and crystallized at 400 ℃, had the characters of anatase structure and crystal size of 18.5 nm by XRD analysis. The SEM imagines show that TiO₂ film was with the characteristics of tight surface structure, The TEM imagine showed the mean particle size is about 20 nm. The photo-degrading test data indicate that the photo-degrading rate to methyl orange solution of 20 mg·L^-1 was more than 84% in 5 hours.     

高透光p型CuSCN薄膜的电沉积制备及机理研究

A stable aqueous electrolyte solution containing Cu(Ⅱ) cations and (SCN) anions was prepared by adding EDTA(ethylenediamine tetraacetic acid disodium salt, C₁₀H₁₄N₂O₈Na₂·2H₂O) to chelate with Cu(Ⅱ) cations. CuSCN films were electrodeposited on transparent ITO conducting substrates from as-prepared electrolyte solution. Deposition mechanisms of CuSCN at varied temperatures have been studied. The results indicate that electron quantum tunnel through CuSCN film plays a role and the dense thin film with nanocrystals was obtained at or below room temperature. However, at higher temperature, a thermally activated process was involved and a thick film was obtained. It has been calculated that the activation energy of the growth for crystals is 0.5 eV. XPS pattern shows that the electrodeposited film is (SCN) in stoichiometric excess, indicating a p-type film. As-prepared CuSCN film was with high transmittance (≥85%) in the visible optical range and the direct transition band gap was 3.7 eV.     

固相反应法合成掺铝的α型氢氧化镍及其电化学性能

Ni(OH)₂ including 20% Al was synthesized by solid-state reaction. The result of XRD indicated that the sample thus prepared was α-Ni(OH)₂， and its size and crystalline form were much poorer than those of the sample prepared by solution-state reaction. TG and DTA curves showed that α-Ni(OH)₂ began to decompose at higher temperature than β-Ni(OH)₂. The electrochemical behaviors of the sample were studied by cyclic voltammetry and constant current charge-discharge experiment. It was found that the sample by solid-state reaction had more ex-cellent electrode reversibility， higher discharge potential and higher discharge capacity.     

微乳法制备纳米TiO2 /SiO2的结构及光催化研究

Nanosized TiO₂ and TiO₂/SiO₂ particles were prepared by hydrolysis of tetrabutyl titanate (TBOT) and tetraethyl orthosilicate (TEOS) in the TX-100 reverse microemulsion. These particles were characterized by TG-DSC, XRD, FTIR, TEM，N₂ adsorption-desorption. Their photocatalytic activity was tested by degradation of methyl orange. The result shows that TiO₂/SiO₂ nanoparticles are with a monodispersed spherical phase and a uniform size distribution，and TiO₂ particles are dispersed on the surface of SiO₂. The band for Ti-O-Si vibration in FTIR was observed, the Ti-O-Si bond increased the stability of anatase TiO₂, suppressed the phase transformation of titania from anatase to rutile. And due to the addition of SiO₂, the average size of titania decreased from 38 nm in pure TiO₂ to 5 nm in TiO₂/SiO₂. It was found, under UV light irradiation, TiO₂/SiO₂ particles showed higher activity than pure TiO₂, and TiO₂/SiO₂(1/1) particles showed the highest photocatalytic activity on the photocatalytic decomposition of methyl orange, which was influenced by crystal structure, particle size, crystallinity and Surface area Characteristics.     

Lu(Et2dtc)3(phen)的生成反应焓变、摩尔热容和恒容燃烧能测定

A ternary solid complex Lu(Et₂dtc)₃(phen) has been obtained from the reaction of hydrated lutetium chloride with sodium diethyldithiocarbamate (NaEt₂dtc), and 1,10-phenanthroline (o-phen·H₂O) in absolute ethanol. IR spectrum of the complex indicates that Lu³⁺ binds with sulfur atom in the Na(Et₂dtc)₃ and nitrogen atom in the o-phen. The enthalpy change of liquid-phase reaction of formation of the complex, Δ_rH_m^Ө (l), was determined to be (-32.821 ± 0.147 ) kJ·mol^-1 at 298.15 K by an RD-496 Ⅲ type heat conduction microcalormeter. The enthalpy change of the solid-phase reaction of formation of the complex, Δ_rH_m^Ө (s), was calculated to be (104.160 ± 0.168) kJ · mol^-1 on the basis of an appropriate thermochemistry cycle. The thermodynamics of liquid-phase reaction of formation of the complex was investigated by changing the temperature of liquid-phase reaction. Fundamental parameters, such as the activation enthalpy (ΔH_≠^Ө), the activation entropy (ΔS_≠^Ө), the activation free energy (ΔG_≠^Ө), the apparent reaction rate constant (k), the apparent activation energy (E), the pre-exponential constant (A) and the reaction order (n), were obtained by combination the reaction thermodynamic and kinetic equations with the data of thermokinetic experiments. The molar heat capacity of the complex, c_m, was determined to be (82.23 ± 1.47) J·mol^-1·K^-1 by the same microcalormeter. The constant-volume combustion energy of the complex, Δ_cU, was determined as (-17 898.228 ± 8.59) kJ·mol^-1 by an RBC-Ⅱtype rotating-bomb calorimeter at 298.15 K. Its standard enthalpy of combustion, Δ_cH_m^Ө, and standard enthalpy of formation, Δ_fH_m^Ө, were calculated to be (-17 917.43 ± 8.11) kJ·mol^-1 and (-859.95 ±10.12) kJ·mol^-1, respectively.