L-苏糖酸锰的制备及标准生成焓

The pink powder of manganese L-threonate was obtained by extracting with alcohol the concentrated solution derived from the reaction between L-threonic acid solution prepared by double decomposition reaction of calcium L-threonate with oxalic acid and superfluous manganese oxide at 80℃ for certain time. The composition of the new compound was determined by chemical and elemental analyses and its formula fits Mn(C₄H₇O₅)₂·H₂O, the IR spectra indicated that Mn²⁺ in the compound coordinates to oxygen atom of the carboxyl group, while the proton of the carboxyl group is dissociated, it was assumed that the coordination number of Mn²⁺ was 4. The results of TG-DTG showed that the compound have fairish stability, the intermediate and final product of the thermal de-composition of the compound are Mn(C₄H₇O₅)₂ and MnO₂, respectively. The constant volume combustion energy of the compound, Δ_cE, were determined by a precise rotating-bomb calorimeter at 298.15K, it was (-3384.30±1.21)kJ·mol^-1, its standard enthalpy of Combustion,Δ_cH_m^?,and standard enthalpy of formation,Δ_fH_m^? , were calculated. They are (-3383.07±1.21)kJ·mol^-1 and (-2 571.68±1.63)kJ·mol^-1, respectively.     

复盐K2Zn(IO3)4·2H2O的热化学研究

The standard enthalpy of formation (Δ_fH^?_m［K₂Zn(IO₃)₄·2H₂O,s,298.2K］=-2210.68 kJ·mol^-1) of a double salt K₂Zn(IO₃)₄·2H相似文献   

RE(Et2dtc)3(phen)(RE=La，Pr，Nd，Sm)的恒容燃烧能测定(英)

Four ternary solid complexes were synthesized with sodium diethyldithiocarbamate (NaEt₂dtc)(b), 1,10-phenanthroline (o-phen) (c) and hydrated lanthanide chlorides in absolute ethanol by an improved reported method. The complexes were identified as the general formula of RE(Et₂dtc)₃(phen) (RE=La, Pr, Nd, Sm) by chemical and elemental analyses. IR spectra of the complexes showed that the RE³⁺ was coordinated with sulfur atoms of NaEt₂dtc and nitrogen atoms of o-phen. The constant-volume combustion energies of complexes, Δ_cU, were determined by a precise rotating-bomb calorimeter at 298.15 K. The standard enthalpies of combustion, Δ_cH_m^?, and standard enthalpies of formation, Δ_fH_m^?, were calculated for these complexes, respectively.     

MgFe2O4纳米粉体的水热合成及其表征(英)

MgFe₂O₄ nanoparticles were hydrothermally synthesized at 150 ℃ using iron nitrate [Fe(NO₃)₃·9H₂O], magnesium nitrate [Mg(NO₃)₂·6H₂O] and sodium hydroxide (NaOH) as starting materials by carefully controlling the reaction conditions. The influences of several factors such as presence or absence of Na⁺, molar ratio of Fe³⁺ / Mg²⁺, concentration of mental ions, temperature and reaction time on resultant products were investigated in the hydrothermal process. The sample was characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM), and its magnetic properties were measured using vibrating sample magnetometer (VSM).     

纳米结晶体Ni0.5Zn0.5Fe2O4对高氯酸铵热行为及分解反应动力学的影响

采用差示扫描量热法(DSC)、热重和微分热重(TG-DTG)及固相原位反应池/快速扫描傅立叶变换红外联用技术(hyphenated in situ thermolysis/RSFTIR)研究了纳米结晶体Ni_0.5Zn_0.5Fe₂O₄与高氯酸铵(AP)组成的混合物的热行为和分解反应动力学。结果表明：Ni_0.5Zn_0.5Fe₂O₄使得AP的低、高温分解放热峰温分别提前17.44 K和27.74 K,并使得对应的分解热分别增加3.7 J·g^-1和193.7 J·g^-1。Ni_0.5Zn_0.5Fe₂O₄并不影响AP的晶转温度和晶转热。Ni_0.5Zn_0.5Fe₂O₄使得AP的TG曲线出现3个阶段,并使得后2个失重阶段的初始和终止温度都有所提前。凝聚相分解产物分析表明Ni_0.5Zn_0.5Fe₂O₄加速了凝聚相AP的分解及氨气的释放。含Ni_0.5Zn_0.5Fe₂O₄的AP的高温分解反应的动力学参数E_a=238.88 kJ·mol^-1,A=1018.59 s^-1,动力学方程可表示为dα/dt=10^18.99(1-α)[-ln(1-α)]^3/5e^-2.87×104T。始点温度(T_e)和峰顶温度(T_p)计算得出AP的热爆炸临界温度值分别为:574.83 K和595.41 K。分解反应的活化熵(ΔS^≠)、活化焓(ΔH^≠)和活化能(ΔG^≠)分别为:109.61 J·mol^-1·K^-1、236.49 kJ·mol^-1及172.58 kJ·mol^-1。     

碳酸铝铵热分解制备纳米氧化铝粉体

Nanosized alumina powders were prepared from Al(NO₃)₃·9H₂O and (NH₄)₂CO₃ through the synthesis of ammonium aluminium carbonate hydroxide (AACH) and followed by calcination. TG-DTA， XRD， TEM and BET were employed to study the process of AACH thermal decomposition and to characterize the products obtained. The results show that high purity (99.97%) and nanosized spherical α-Al₂O₃ powders with the diameter of 40～50nm and BET surface area 32.5m²·g^-1 can be obtained by calcining AACH at 1150℃ for 1.5h， the sequence of phase transformation during calcination was AACH → amorphous Al₂O₃ → γ-Al₂O₃ → α-Al₂O₃， and the activation energy of AACH decomposition is (115±5)kJ·mol^-1.     

复盐法制备无水氯化镁的热解机理及动力学研究

The complex compound (MgCl₂·C₆H₅NH₂·HCl·6H2O) was prepared by reaction of C₆H₅NH₂·HCl with MgCl₂·6H₂O. Reaction mechanism and kinetics of the compounds decomposition were studied by means of the TG-DTA-MS coupling technique and the TG-DTA technique. The results show that there are four steps in the complex′s thermal decomposition, the first two steps correspond to the loss of six crystal waters and the last two steps loss one Aniline hydrochloride. The first three steps belong to the R2 mechanism with 2-dimentional phase boundary reaction as the control step, and the last step belongs to the D3 with 3-dimensional diffusion (sphere Jander equ.) as the control step. The apparent active energy of four steps are, 127.4 kJ·mol^-1, 124.8 kJ·mol^-1, 142.3 kJ·mol^-1 and 329.0 kJ·mol^-1, respectively and the frequency factor are 1.28 × 10¹⁸ s^-1, 7.94 × 10¹⁵ s^-1, 5.98 × 10¹⁶ s^-1 and 4.39 × 10³⁴ s^-1, respectively.     

合成大比表面γ-Mo2N的新方法

The production of high specific surface area γ-Mo₂N (up to 165 m²·g^-1, passivated) by temperature programmed reaction of MoO₃ with mixtures of N₂ and H₂ was reported. The synthetic condition of high surface area γ-Mo₂N (usually, S_BET>100 m²·g^-1) were quite difficult and the amount of starting material MoO₃ in each batch was much less than 0.5 gram. However, some synthetic conditions had been greatly improved in our experiments. The crystalline phase and specific surface area had been characterized by XRD and BET. The XRD gave some information for reaction mechanism.     

Cr2O3和CrO3/Cr2O3催化剂的2-氯-1，1，1-三氟乙烷气相氟化反应的活性物种和失活

采用沉淀法和浸渍法制备了2种铬基（Cr₂O₃和CrO₃/Cr₂O₃）催化剂,用于气相氟化2-氯-1,1,1-三氟乙烷合成1,1,1,2-四氟乙烷。研究发现含有低价铬（Cr³⁺）物种的Cr₂O₃催化剂上2-氯-1,1,1-三氟乙烷的稳态转化率为18.5%,而含有高价铬（Cr⁶⁺）物种和低价铬（Cr³⁺）物种的CrO₃/Cr₂O₃催化剂初始转化率达到30.6%,然而存在明显的失活。含有Cr⁶⁺物种的CrO₃/Cr₂O₃催化剂的2-氯-1,1,1-三氟乙烷氟化反应初始TOF值为1.71×10^-4 mol_HCFC-133a·mol_Cr(Ⅵ)^-1·s^-1,高于含有Cr³⁺物种的Cr₂O₃催化剂（4.16×10^-5 mol_HCFC-133a·mol_Cr(Ⅲ)^-1·s^-1）。Cr₂O₃催化剂在氟化反应前后催化剂的物相结构保持不变;而含有高价铬物种的CrO₃/Cr₂O₃催化剂经HF反应后生成了CrO_xF_y活性物种。然而,CrO_xF_y物种在反应中挥发或转化成稳定但无活性的CrF₃,从而导致催化剂失活。     

α-Ti(HPO4)2微球负载型催化剂的合成及其烯烃聚合催化性能

2种茂金属催化剂及1种后过渡金属催化剂分别被固载于经过甲基铝氧烷处理后的α-Ti（HPO₄）₂微球表面,制备得到3种微球负载型催化剂。在烯烃聚合反应过程中,3种负载型催化剂均表现出比硅胶负载型催化剂更高的催化活性。2种茂金属负载型催化剂在乙烯、丙烯聚合反应中的活性分别高达6.8×10⁷ g_PE·（mol_Zr·h）^-1和5.0×10⁷ g_PP·（mol_Zr·h）^-1,所产生的烯烃聚合产物分子量分布较窄（M_w/M_n<2.3）,表现出良好的单中心催化特性,而且丙烯聚合产物的等规度高达96.5%。负载型后过渡金属催化剂在乙烯聚合反应中的活性稍低,但也能够达到8.3×10⁶ g_PE·（mol_Fe·h）^-1。3种负载型催化剂催化烯烃聚合产物均成微球型,能够很好地复制载体的形貌。     

三元配合物Tb(Et2dtc)3(phen)的热化学性质

以铜试剂(NaEt2dtc•3H2O)和邻菲咯啉(o-phen•H2O) 与水合氯化铽(TbCl3•3.75H2O)在无水乙醇中制得了三元固态配合物.化学分析和元素分析确定其组成为Tb(Et2dtc)3(phen).IR光谱研究表明配合物中Tb3＋与NaEt2dtc中的硫原子双齿配位,同时与phen的氮原子双齿配位.用Calvet微热量计测定了298.15 K下液相生成反应的焓变ΔrHmθ(l),为(－21.819±0.055) kJ•mol－1,通过热化学循环计算了固相生成反应焓变ΔrHmθ(s),为(128.476±0.675) kJ•mol－1.改变反应温度,研究了液相生成反应的热动力学.用精密转动弹热量计测得配合物的恒容燃烧能ΔcU为(－17646.95±8.64) kJ•mol－1,经计算其标准燃烧焓ΔcHHmθ和标准生成焓ΔfHmθ分别为(－17666.16±8.64) kJ•mol－1和(－1084.04±9.49) kJ•mol－1.     

Zn(Thr)Ac2•2H2O固态配合物的制备及标准生成焓

在水-丙酮混合溶剂中合成了未见文献报导的Zn(Thr)Ac2•2H2O固态配合物,通过化学分析、元素分析、IR、XRD和TG-DTG等对其组成、结构及热稳定性进行了研究.用微量热法测定了配合物在298.15 K时在纯水中的溶解焓,计算了Zn(Thr)2＋(aq,∞)和Zn(Thr)Ac2•2H2O(s) 的标准摩尔生成焓分别为(955.24±5.70) kJ•mol－1和(-570.92±5.71) kJ•mol－1.     

Thermokinetics on the reaction of formation of Dy[(C5H8NS2)3(C12H8N2)]

The enthalpy change of formation of the reaction of hydrous dysprosium chloride with ammonium pyrrolidinedithiocarbamate (APDC) and 1,10-phenanthroline (o-phen•H₂O) in absolute ethanol at 298.15 K has been determined as (-16.12 ± 0.05) kJ•mol^-1 by a microcalormeter. Thermodynamic parameters (the activation enthalpy, the activation entropy and the activation free energy), rate constant and kinetics parameters (the apparent activation energy, the pre-exponential constant and the reaction order) of the reaction have also been calculated. The enthalpy change of the solid-phase reaction at 298.15 K has been obtained as (53.59 ± 0.29) kJ•mol^t-1 by a thermochemistry cycle. The values of the enthalpy change of formation both in liquid-phase and solid-phase reaction indicated that the complex could only be synthesized in liquid-phase reaction.

     

Thermokinetics on the reaction of formation of Dy[(C<Subscript>5</Subscript>H<Subscript>8</Subscript>NS<Subscript>2</Subscript>)<Subscript>3</Subscript>(C<Subscript>12</Subscript>H<Subscript>8</Subscript>N<Subscript>2</Subscript>)]

The enthalpy change of formation of the reaction of hydrous dysprosium chloride with ammonium pyrrolidinedithiocarbamate (APDC) and 1,10-phenanthroline (o-phen?H₂O) in absolute ethanol at 298.15 K has been determined as (-16.12 ± 0.05) kJ?mol^-1 by a microcalormeter. Thermodynamic parameters (the activation enthalpy, the activation entropy and the activation free energy), rate constant and kinetics parameters (the apparent activation energy, the pre-exponential constant and the reaction order) of the reaction have also been calculated. The enthalpy change of the solid-phase reaction at 298.15 K has been obtained as (53.59 ± 0.29) kJ?mol^t-1 by a thermochemistry cycle. The values of the enthalpy change of formation both in liquid-phase and solid-phase reaction indicated that the complex could only be synthesized in liquid-phase reaction.     

室温固相反应制备纳米四水磷酸锌的热化学研究

Nanocrystalline zinc phosphate tetrahydrate was synthesized by solid-state reaction at ambient temperature using Na3PO4·12H2O and ZnSO4·7H2O as regents. The enthalpy of reaction and the standard enthalpy of formation of zinc phosphate tetrahydrate were studied by microcalorimeter. According to Hess s law, a new thermochemical cycle was designed. The dissolution enthalpies of reactant (△H1) and product (△H2) were performed by a RD496 microcalorimeter at 298.15 K using aqueous solution of hydrochloric acid (4mol/L) as a calorimetric solvent. Ultraviolet spectrum, conductivity and refractive index were measured respectively. The results show as follows: △H1=(-47.180±0.084) kJ/mol, △H2=(-7.617±0.096 )kJ/mol. The ultraviolet spectra of the above solution are the same. Conductivity values after 500 times diluted are 2180 and 2181μs/cm respectively. Refractive indexes are 1.3679 and 1.3678 respectively. The standard enthalpy value of the reaction was calculated: △rHm=-39.530 kJ/mol. The standard enthalpy of formation for zinc phosphate tetrahydrate are recommended -4354.004 kJ/mol.     

稀土脯氨酸配合物[RE2(L-Pro)6(H2O)4](ClO4)6的标准生成焓测定

合成了两种稀土高氯酸盐与L 脯氨酸配合物的晶体.经热重、差热、化学分析及对比有关文献,知其组成是[Pr2(L Pro)6(H2O)4](ClO4)6和[Er2(L Pro)6(H2O)4](ClO4)6,质量分数为99.24％和98.20％.选用RE(NO3)3•6H2O(RE=Pr,Er)、L Pro、NaClO4•H2O和NaNO3作辅助物,使用具有恒温环境的反应热量计,以2 mol•L－1 HCl作溶剂,分别测定了[2RE(NO3)3•6H2O＋6L Pro＋6NaClO4•H2O]和{[RE2(L PrO)6(H2O)4](ClO4)6＋6NaNO3}在298.15 K时的溶解热.设计一热化学循环求得化学反应的反应焓ΔrHm分别是：63.904 kJ•mol－1和91.017 kJ•mol－1,经计算得配合物[RE2(L Pro)6(H2O)4](ClO4)6(s)在298.15 K时的标准生成焓ΔfHm(298.15 K)分别是－6 594.78 kJ•mol－1和－6 532.87 kJ•mol－1.     

Thermokinetics on the reaction of formation of Dy[(C_5H_8NS_2)_3(C_(12)H_8N_2)]

The enthalpy change of formation of the reaction of hydrous dysprosium chloride with ammonium pyrrolidinedithiocarbamate (APDC) and 1,10-phenanthroline (o-phen·H2O) in absolute ethanol at 298.15 K has been determined as (-16.12±0.05) kJ·mol-1 by a microcalor-meter. Thermodynamic parameters (the activation enthalpy, the activation entropy and the activation free energy), rate constant and kinetics parameters (the apparent activation energy, the pre-exponential constant and the reaction order) of the reaction have also been calculated. The enthalpy change of the solid-phase reaction at 298.15 K has been obtained as (53.59±0.29) kJ·mol-1 by a thermochemistry cycle. The values of the enthalpy change of formation both in liquid-phase and solid-phase reaction indicated that the complex could only be synthesized in liquid-phase reaction.     

Thermochemical Study of Coordination of Holmium Chloride Hydrate with Diethylammonium Diethyldithiocarbamate

The complex of holmium chloride hydrate with diethylammonium diethyldithiocarbamate (D-DDC) was synthesized via mixing their solutions in absolute alcohol under a dry N2 atmosphere. The elemental and chemical analyses show that the complex has the general formula Et2NH2[Ho(S2CNEt2)4]. It was also characterized by IR spectroscopy. The enthalpies of the dissolution of holmium chloride hydrate and D-DDC in absolute alcohol at 298.15 K o and the enthalpy changes of liquid-phase reactions of the formation of Et2NH2[Ho(S2CNEt2)4] at different temperatures were determined by microcalorimetry. On the basis of experimental and calculated results, three thermodynamic parameters (the activation enthalpy, the activation entropy and the activation free energy), the rate constant and three kinetic parameters (the apparent activation energy, the pre-exponential constant and the reaction order) of the liquid-phase reaction of the complex formation were obtained, The enthalpy change of the solid-phase complex formation reaction at 298.15 K was calculated by means of a thermochemical cycle.