零气耗空气除湿实验研究

针对有热再生式压缩空气除湿装置在再生及冷吹过程中产生气耗的缺点,运用喷射器及恒压变温吸附再生原理设计了一种零气耗空气除湿工艺流程。在搭建小型实验台的基础上,通过改变喷射器引射率进行实验研究三种工况条件下活性氧化铝的吸附再生性能。实验结果表明:实验全过程能够保持一个相对稳定且有效的恒压变温吸附再生条件,且出口空气露点达到生产要求;随着喷射率的降低,吸附剂再生效果逐渐下降,而吸附效果逐渐上升。引射率为0.5时的再生时间约为引射率0.75的1.85倍,再生速率约为0.51倍。而引射率0.33,引射率0.5的吸附效率分别为引射率0.75的1.04倍,1.11倍,吸附稳定时间1.11倍,2.22倍。     

均值-方差准则下具有利率和通胀双重风险的资产负债管理问题

在均值-方差准则下研究具有利率风险和通胀风险的资产负债管理问题.首先,利用Lagrange乘子技术将这个资产负债管理问题转化为一个标准的均值-方差有效问题.然后,利用Hamilton-Jacobi-Bellman方法、偏微分方程方法和Lagrange对偶定理得到原问题有效的投资策略和有效前沿的解析表达式.最后,在解析表达式的基础上,通过数值算例分析了模型主要参数对投资策略和有效前沿的影响.     

基于分子信标探针RT-qPCR快速检测坚果中的霉菌EI北大核心CSCD

霉菌污染是坚果质检不合格的主要原因,实现其快速检测对于坚果行业发展具有重要意义。曲霉属、青霉属和镰刀菌属是坚果霉菌污染的主要污染菌群,根据其内转录间隔区(ITS)基因序列设计引物及3对特异性分子信标探针,建立了一种同时检测坚果中曲霉属、青霉属和镰刀菌属的多重实时荧光定量聚合酶链式反应(qPCR)检测方法。通过对qPCR反应体系进行优化,得到良好的扩增曲线和标准曲线,该方法的检出限分别为:曲霉属2.5×10^(-2)ng/mL(约741 CFU/g),青霉属8.7×10^(-3)ng/mL(约500 CFU/g),镰刀菌属5.6×10^(-3)ng/mL(约454 CFU/g)。本研究为坚果中霉菌的检测提供了一种快速准确的方法,相对于国标检测方法需要耗时7 d,本方法用于检测坚果中的霉菌,用时仅为3 d。     

High throughput N-modular redundancy for error correction design of memristive stateful logic

Memristive stateful logic is one of the most promising candidates to implement an in-memory computing system that computes within the storage unit. It can eliminate the costs for the data movement in the traditional von Neumann system. However, the instability in the memristors is inevitable due to the limitation of the current fabrication technology, which incurs a great challenge for the reliability of the memristive stateful logic. In this paper, the implication of device instability on the reliability of the logic event is simulated. The mathematical relationship between logic reliability and redundancy has been deduced. By combining the mathematical relationship with the vector-matrix multiplication in a memristive crossbar array, the logic error correction scheme with high throughput has been proposed. Moreover, a universal design paradigm has been put forward for complex logic. And the circuit schematic and the flow of the scheme have been raised. Finally, a 1-bit full adder (FA) based on the NOR logic and NOT logic is simulated and the mathematical evaluation is performed. It demonstrates the scheme can improve the reliability of the logic significantly. And compared with other four error corrections, the scheme which can be suitable for all kinds of R-R logics and V-R logics has the best universality and throughput. Compared with the other two approaches which also need additional complementary metal-oxide semiconductor (CMOS) circuits, it needs fewer transistors and cycles for the error correction.     

高选择性高效液相色谱-电化学检测法测定丹参中5种酚类物质

发展了一种高灵敏度的高效液相色谱-电化学检测（HPLC-ECD）方法,用于丹参中5种酚类物质的定量分析。为了获得较高的检测灵敏度,对流动相的pH、缓冲溶液类型和浓度、有机相种类和梯度以及流速做了系统研究。在较低的pH（2.8）、较低的缓冲盐浓度（20 mmol/L NaH₂PO₄）和较缓的乙腈梯度下,以0.2 mL/min流速可为5种酚类的分离检测提供较好的分离度和较高的检测灵敏度。在获得优化的分离参数后,将其用于14批丹参药材中5种酚类物质的定量分析。结果表明,该方法可获得较好的回收率（>95%）、较宽的线性范围（高达4个数量级）、较好的重复性（RSD<4.01%）和较高的灵敏度（咖啡酸的LOQ低至1.5μg/L）。与紫外检测方法相比,ECD检测方法具有更高的选择性,可减少非抗氧化活性的物质的干扰。     

SiCp尺寸对SiCp／Cu基复合材料抗磨性能的影响

以纳米级(30nm)、亚微米级(130nm)、微米级(14μm)3种粒径的SiCp和微米级(10μm)铜粉为原料，用冷压烧结和热挤压方法制备了纳米、亚微米和微米级SiCp／Cu复合材料，考察了SiCp尺寸对SiCp／Cu复合材料抗磨性能的影响．结果表明，不同尺寸的SiCp颗粒作为增强相均能显著改善铜基复合材料的抗磨性能；随着SiCp尺寸的增大，SiCp／Cu复合材料的抗磨性能提高幅度显著增大，但偶件磨损表面的犁削加剧；以微米级SiCp为原料制备的SiCp／Cu复合材料的抗磨性能最佳，但其导致偶件40Cr钢犁削作用显著加剧．从摩擦副整体的摩擦磨损性能角度而言，宜采用SiCp尺寸为130nm的SiCp／Cu复合材料同40Cr钢组成摩擦副．     

改进的 Morse 势和冲击压缩

用分子动力学方法模拟凝聚介质中一维分子链上的激波传播，以得到与冲击压缩实验相一致的结果。通过比较分子链上的孤立波解与激波的实验结果，提出对分子间Ｍｏｒｓｅ作用势进行与考虑量子效应相一致的修正，从而使分子动力学模拟得到的激波Ｕｓ－Ｕｐ关系与实验结果在波后粒子速度达到声速的范围内一致。     

只是发现权之争吗？—也谈最小作用量原理之争

只是发现权之争吗？—也谈最小作用量原理之争潘轺湘（中国科学院岩土力学研究所，武汉４３００７１）近代力学史上，有一场争论曾引起过许多学者的关注，这就是１８世纪发生在欧洲的最小作用量原理之争。因为争论的参战者大多是声名赫赫的大学者，甚至还有一位封建君主，...     

玻璃纤维带隙间环氧胶渗流特性的试验研究

 对环氧胶在含有玻璃纤维带的间隙中的渗流进行了试验研究. 通 过试验确定纤维的松紧度、输胶压力、抽口真空度和输胶温度等不同参 数对渗流流速的影响，为环氧胶的VPI(真空压力浸渍或浇铸)工艺提供 工艺参数.     

Mechanically tunable broadband terahertz modulator based on high-aligned Ni nanowire arrays

We present a mechanically tunable broadband terahertz(THz) modulator based on the high-aligned Ni nanowire(NW)arrays. The modulator is a sandwich structure consisting of two polydimethylsiloxane layers and a central layer of highaligned Ni NW arrays. Our experimental measurements reveal the transmittance of THz wave can be effectively modulated by mechanical stretching. The NW density in arrays increases with the strain increasing, which induced an enhancement in the absorption of THz wave. When the strain increases from 0 to 6.5%, a linear relationship is observed for the variation of modulation depth(MD) of THz wave regarding the strain, and the modulated range is from 0 to 85% in a frequency range from 0.3 THz to 1.8 THz. Moreover, the detectable MD is about 15% regarding the 1% strain change resolution. This flexible Ni NW-based modulator can be promised many applications, such as remote strain sensing, and wearable devices.