非PLL相位平均型参考线原型验证

射频相位参考线是粒子加速器的重要组成部分之一,为射频低电平控制系统(LLRF)、束流诊断系统、定时系统等提供稳定的相位锁定参考信号。为减少远距离传输过程中由环境温度变化导致的射频传输线中的射频相位漂移,多个加速器装置中已经采用射频相位参考线提供射频相位参考,这些相位参考的实现方案主要是基于恒温控制和基于光纤锁相。与这些方案相比,采用相位平均方法不仅可以保持长距离节点之间的相位稳定,而且更易于现场安装与维护。现有的带有锁相环(PLL)的终端短路方式实现相位平均参考线的方案仍有一些节点数量限制等方面的不足,本文对相位平均参考线结构进行了去除PLL的简化设计并进行了验证,以期增加更多的相位分配节点以及降低对射频器件参数的要求。对非PLL的单端输入终端短路相位平均方案与两端输入各节点间互为参考的相位平均方案分别进行了实验测试,结果表明两者的相位RMS精度可以达到0.1°~0.3°。并对不同的相位平均实现方案中相位不稳定的产生原因进行了分析,结果表明,除环境温度外,同轴线缆材质、合成相位与幅度的不平衡合成等也是重要影响因素。     

约束状态下聚能杆流对混凝土作用的实验研究

聚能杆流是多级串联战斗部次级装药的常用聚能侵彻体.基于两种典型的聚能装药结构,设计加工了有不同直径和深度预制约束孔的C35混凝土靶板,开展了(Φ60mm亚半球和K装药在不同约束状态侵彻毁伤混凝土对比实验研究.结果表明,两种聚能杆流都可在混凝土孔约束状态下形成大且深的侵彻孔;随约束孔径增大,侵彻深度先减小而后增加;随约束...     

超声场中气泡融合的影响因素分析

采用高速摄影机对不同声压和频率作用下接触气泡的融合时间进行了实验研究,运用实验和数值计算相结合的方法分析了次Bjerknes力和最大径向振动速度对气泡融合时间的影响,结果表明在不同的超声声压和频率作用下,气泡的融合时间会随着次Bjerknes力和最大径向振动速度的增大而增大,对两个因素进行对比分析得到次Bjerknes力是影响气泡融合的关键因素。      

白藜芦醇负离子与Ag+化合物的振动光谱研究

本研究采用密度泛函理论不仅对顺式和反式白藜芦醇的结构、IR和Raman光谱进行了计算模拟和分析指认,而且还考察了其负离子与Ag~+结合后的结构和相应的光谱分析。研究结果表明:(1) Ag~+结合在白藜芦醇的单酚羟基位时,会大大提高拉曼活性;(2)可以通过连接两个酚的C=C的伸缩振动(1650 cm~(-1))的拉曼活性不同鉴别顺式和反式白藜芦醇的结构。这开启了一个新的观测窗口来探测白藜芦醇的顺反转变过程;(3)Ag~+结合白藜芦醇负离子后,与Ag相连的C-O伸缩振动的拉曼活性加强,从而可以据此来确定白藜芦醇负离子是否与Ag~+相结合;(4)通过谱峰的数目可以区别顺式和反式白藜芦醇负离子与Ag~+结合的结构。本研究结果不仅对采用光谱方法区分结构,而且对理解表面增强拉曼光谱(SERS)具有重要的意义。     

含电子相影响的多功能含能结构材料冲击压缩理论计算

为了更好地描述疏松态金属材料的冲击压缩特性,基于托马斯-费米原子统计模型,研究金属晶体中电子热行为对系统内粒子数、内能、压强等参数的影响,修改了描述疏松金属材料的Wu-Jing模型中的参数R的计算方法。结合混合物的冷能叠加原理,得到考虑电子相影响的疏松态混合物物态方程。并对不同配比的密实态W/Cu合金、不同疏松度的Al/Ni合金的典型多功能含能结构材料进行计算,获得其冲击压力-比容关系及冲击波速度-粒子速度关系,计算结果与实验结果吻合较好。结果表明,本文中模型对未反应条件下的金属材料冲击压缩特性预测较好;疏松材料的冲击压力-粒子速度关系并不呈现出密实材料的近似线性关系,其冲击压缩过程分为压实前和压实后2个明显的阶段;多功能含能结构材料的冲击压缩特性受材料孔隙率、材料配比等影响明显。     

1.3 GHz单cell超导射频腔等离子体清洗放电研究(英文)

场致发射限制超导射频腔加速梯度增长。为了减少超导射频腔场致发射,在室温条件下,设计搭建了1.3GHz单cell超导射频腔等离子体清洗实验装置,开展等离子体清洗放电研究。使用CST软件模拟腔中的电磁场分布并且优化外部品质因数得到合适的放电条件。随着压强、前向功率和含氧量的变化,实验探讨了Ar/Ar-O₂放电的物理特征和电子激发温度的变化趋势。残余气体分析结果表明,Ar/O₂等离子体清洗能够消除腔体内表面的碳化物。Field emission limits the accelerating gradient increase in SRF cavities. In order to reduce field emission of SRF cavities, the plasma processing experimental setup of a 1.3 GHz single-cell SRF cavity is designed and built to carry out plasma processing discharge research at room temperature. The electromagnetic field distribution is simulated and the external quality factor is optimized to provide a suitable discharge condition using CST software. It is explored that the physical property of Ar/Ar-O₂ discharge and the variation trend of electron excitation temperature with the changes of pressure, forward power and O₂ content in experiment. The result of residual gas analysis indicates that Ar/O₂ plasma processing can eliminate the carbide of the inner surface of cavity.     

CSR切割磁铁设计

兰州重离子加速器冷却储存环(HIRFL CSR)由一个主环(CSRm)和实验环(CSRe)构成.两个储存环的束流注入与引出都需要借助于切割磁铁的导向来完成.介绍了CSR的切割磁铁的物理设计和二维场计算. In order to satisfy the requirement of beam injection and extraction of CSR, four magnetic septums will be used in the accelerator. In the design, the shape of the lamination is optimized by 2-D magnetic field calculation. Also, in order to decrease the leakage field and obtain a satisfied field distribution, a special auxiliary coil and a shield iron plate are considered and as well as the construction of the septum leg is treated in a special way. As a result, the leakage field is almost...     

A vertical test system for China-ADS project injector Ⅱ superconducting cavities

To test superconducting cavities, a vertical test system has been designed and set up at the Institute of Modern Physics (IMP). The system design is based on VCO-PLL hardware and the NI Labview software. The test of the HWR010#2 superconducting cavity shows that the function of this test system is satisfactory for testing the low frequency cavity.     

Study of influence of radial matcher section end shape on RFQ cavity frequency

To investigate the feasibility of using a form cutter to machine the Radial Matcher Section (RMS) of the Radio Frequency Quadrupole (RFQ) for the Accelerator Driven System (ADS) project at Institute of Modern Physics, Chinese Academy of Sciences (IMP, CAS), the influence of RMS end shape on the RFQ cavity frequency is studied. The results indicate that using a form cutter to machine the RMS of an RFQ will indeed influence the cavity frequency. The RMS end shape will give more influence to a shorter RFQ cavity. For the 4.2 m ADS RFQ, the influence is negligible, which means that a form cutter can be used to machine the RMS.     

Full period superconducting section physics design for injector Ⅱ of China-ADS

The China Accelerator Driven Subcritical System (China-ADS) project, which is a strategic plan and aims to design and build an ADS demonstration facility, has been proposed and launched actively in China. Injector Ⅱ as one of the parallel injectors of China-ADS, and is prompted by the Institute of Modern Physics (IMP). In this paper, a new scheme with full period lattice structure for the SC section is proposed. In the new scheme, there are sixteen periods, with one superconducting solenoid and one superconducting cavity included in each period. All of the elements are contained in four cryomodules. The dreadful influence of the mismatch caused by period structural change can be avoided, and the beam quality is favorable. In addition, this new scheme has certain advantages in reducing the project's difficulty and construction risk. The details of the design and beam dynamic simulation for the full period lattice structure are given in this paper.