1.3 GHz单cell超导射频腔等离子体清洗放电研究(英文)

场致发射限制超导射频腔加速梯度增长。为了减少超导射频腔场致发射,在室温条件下,设计搭建了1.3GHz单cell超导射频腔等离子体清洗实验装置,开展等离子体清洗放电研究。使用CST软件模拟腔中的电磁场分布并且优化外部品质因数得到合适的放电条件。随着压强、前向功率和含氧量的变化,实验探讨了Ar/Ar-O₂放电的物理特征和电子激发温度的变化趋势。残余气体分析结果表明,Ar/O₂等离子体清洗能够消除腔体内表面的碳化物。Field emission limits the accelerating gradient increase in SRF cavities. In order to reduce field emission of SRF cavities, the plasma processing experimental setup of a 1.3 GHz single-cell SRF cavity is designed and built to carry out plasma processing discharge research at room temperature. The electromagnetic field distribution is simulated and the external quality factor is optimized to provide a suitable discharge condition using CST software. It is explored that the physical property of Ar/Ar-O₂ discharge and the variation trend of electron excitation temperature with the changes of pressure, forward power and O₂ content in experiment. The result of residual gas analysis indicates that Ar/O₂ plasma processing can eliminate the carbide of the inner surface of cavity.     

强流RFQ的固态功率源模块故障分析（英文）

用于中科院近代物理研究所的ADS项目中的射频四极加速器(RFQ)的新RF系统在2017年初升级,原来的电子四极放大器被两个新的固态功放(SSA)所替换,它们是两台相同的额定功率为80kW的功率源,通过两个相同的耦合器在腔内合成至少100kW的功率。但是对于SSA来说,为了功率组合,太多的功率模块的振幅和相位进行了调整和优化,一个或几个损坏的环形器(包括吸收负载)可能导致整个射频系统的失效。特别是,根据实验和仿真,发生失配问题后,如果两级合成器之间的传输线电长度满足某一特定条件时,系统的散射参数会有很大的波动,甚至切断。详细介绍了北京北广科技股份有限公司用于模拟多级合成放大的模拟方法、放大链路的故障分析及相关实验情况。     

Design of the new couplers for C-ADS RFQ

A new special coupler with a kind of bowl-shaped ceramic window for a proton linear accelerator named the Chinese Accelerator Driven System (C-ADS) at the Institute of Modern Physics (IMP) has been simulated and constructed and a continuous wave (CW) beam commissioning through a four-meter long radio frequency quadruple (RFQ) was completed by the end of July 2014. In the experiments of conditioning and beam, some problems were promoted gradually such as sparking and thermal issues. Finally, two new couplers were passed with almost 110 kW CW power and 120 kW pulsed mode, respectively. The 10 mA intensity beam experiments have now been completed, and the couplers during the operation had no thermal or electro-magnetic problems. The detailed design and results are presented in the paper.     

Beam dynamics study of RFQ for CADS with a 3D space-charge-effect

The ADS (accelerator driven subcritical system) project was proposed by the Chinese Academy of Sciences. The initial proton beams delivered from an electron cyclotron resonance ion source can be effectively accelerated by 162.5 MHz 4.2 m long room temperature radio-frequency-quadrupoles (RFQ) operating in CW mode. To test the feasibility of this physical design, a new Fortran code for RFQ beam dynamics study, which is space charge dominated, was developed. This program is based on Particle-In-Cell (PIC) technique in the time domain. Using the RFQ structure designed for the CADS project, the beam dynamics behavior is performed. The well-known simulation code TRACK is used for benchmarks. The results given by these two codes show good agreements. Numerical techniques as well as the results of beam dynamics studies are presented in this paper.     

End-to-end simulation of the C-ADS Injector Ⅱ with a 3-D field map

The InjectorⅡ, one of the two parallel injectors of the high-current superconducting proton driver linac for the China Accelerator-Driven System (C-ADS) project, is being designed and constructed by the Institute of Modern Physics. At present, the design work for the injector is almost finished. End-to-end simulation has been carried out using the TRACK multiparticle simulation code to check the match between each acceleration section and the performance of the injector as a whole. Moreover, multiparticle simulations with all kinds of errors and misalignments have been performed to define the requirements of each device. The simulation results indicate that the lattice design is robust. In this paper, the results of end-to-end simulation and error simulation with a 3-D field map are presented.     

C-ADS注入器Ⅱ项目RFQ射频系统介绍（英）

C-ADS注入器Ⅱ的RFQ射频系统是该强流加速器的关键一环,它通过两台完全一样的耦合器为一台四边形四翼型RFQ提供和传送功率。该射频系统在设计之初就考虑为10 mA连续束流而进行特殊优化,从功率源、耦合器和功率传输系统几个方面对其进行详细介绍,尤其是针对CW模式下的系统稳定运行以及设备可靠性等方面进行的特殊考虑和模拟方法。该系统已经在2015年通过了10 mA连续束的测试,证实了该射频系统的设计和调试符合物理的实验需求。特别阐述了该系统中一种新的碗型陶瓷窗耦合器的设计思路和一种无环形器情况下的特殊的耦合系数调谐方法,同时推导了双端口耦合的计算方法的具体设置过程。     

基于窗耦合结构的HIAF RFQ高频腔体研究

作为直线加速器的前级聚焦加速部分,RFQ(射频四极场) 在束流动力学和运行稳定性上都应表现良好,需要保持电场平整和电磁强耦合。为实现这两个目标,提出并研究了窗耦合结构。针对工作频率为81.25 MHz 的1 m长模型腔,利用三维电磁仿真软件CST MWS微波工作室对传统的四翼型、四杆型高频结构进行了仿真,并重点研究了窗耦合型结构。对开窗的对称方式、开窗的个数和大小等进行了分析,发现合适的窗耦合结构能保持较为紧凑的横向尺寸同时能耗适中,同四翼型结构相比二极模频率也远离了运行频率。为验证模拟结果,建造了一个铝模型腔,并对模型腔进行了冷模测试,实测频率为81.41 MHz,相邻模频率差为10.74 MHz,与模拟结果接近。仿真模拟和模型腔测试的结果表明,窗耦合四翼型结构可作为较低频率RFQ的一种设计。As a focusing and acceleration element in front part of the linear accelerator RFQ, should have ahigh performance in both beam dynamic and operation stability. It requires the electro-magnetic field of RFQ to keep uniform and strongly coupled. In this paper the window coupled structure is proposed and investigated to meet the requirements of RFQ design. Different structures have been compared and analyzed, including four-vane type and four-rod type, and the four-vane type with windows. It was concluded that window-coupled structure is more compact in the transverse dimension with modest power loss and the dipole frequency is far from the operation frequency compare to the normal four-vane structure. A one-meter long and frequency of 81.25 MHz model-cavity of alumimum was employed as a sample and simulated by using the microwave studio of CST. The low power RF test results show that the operating frequecy is 81.41 MHz and the nearest mode frequency separation is 10.74 MHz, which is in good agreement with the simulated values. It is concluded that the window-coupled structure is a candidate for low frequency RFQ.