醋酸纤维素/PET接枝共聚物的制备及性能

以低数均分子量的聚对苯二甲酸乙二醇酯(PET)、二醋酸纤维素(CDA)为原料,异孚尔酮二异氰酸酯(IPDI)为接枝剂,二月桂酸二丁基锡(DBTDL)和离子液体1-丁基-3-甲基咪唑氯盐为催化剂制备得到新型的接枝共聚物CDA-g-PET。对接枝过程进行了优化,研究了催化剂种类与接枝剂用量对接枝过程的影响,利用红外分析和广角X射线衍射分析探究了接枝机理。同时对CDA-g-PET膜进行力学性能测试,探讨了PET的加入量对CDA-g-PET膜力学性能的影响。结果表明:PET通过化学键连接接枝到CDA上,接入的PET降低了CDA的结晶性;采用DBTDL与离子液体作为联合催化剂,接枝时间由7d缩短至8h;当接枝剂IPDI的加入量,即n(IPDI)/n(PET)为1.05~1.10时CDA-g-PET无交联;随着PET含量的增加,CDA-g-PET膜与CDA膜相比拉伸强度仅降低6.55%~27.24%,断裂伸长率增加149.89%~177.81%。     

高频燃烧红外吸收法测定铅精矿中的硫

利用高频燃烧红外吸收碳硫仪测定铅精矿中的硫含量。低硫含量(S<5%)铅精矿样品直接称样测定;高硫含量(S>5%)铅精矿样品添加稀释剂后称样测定。对样品称样量、助熔剂类型及用量等条件进行了研究,获得最佳分析条件。通过空白实验测得方法检出限为0.0010%,利用铅精矿有证标准物质进行精密度和准确度验证,方法的标准偏差在0.295%~1.3%之间,结果表明该方法精密度高、准确度好,能够满足铅精矿中硫含量的快速准确测定。     

高核Ag/S纳米团簇合成的研究进展

硫醇配体保护的高核银纳米团簇具有丰富的结构和性能, 在光致发光、 生物传感、 纳米材料等方面具有广阔的应用前景. 然而, 精确控制高核Ag/S纳米团簇的尺寸和结构面临着巨大的挑战, 构建高核Ag/S纳米团簇的可行策略也一直是人们关注的焦点. 近年来, 随着合成方法和表征技术的不断发展, 高核Ag/S纳米团簇的合成和性能研究方面均取得了显著的成就. 本文总结了含20个或以上Ag原子的Ag/S纳米团簇的合成方法(直接还原法、 阴离子模板法及配体交换法), 对部分高核Ag/S纳米团簇的结构进行了探讨, 并展望了未来研究的趋势.     

Study of the beam loading effect in the CSNS/RCS

The China Spallation Neutron Source/Rapid Cycling Synchrotron (CSNS/RCS) accelerates a high-intensity proton beam from 80 MeV to 1.6 GeV. Since the beam current and beam power is high, the beam loading is a severe problem for the stability of the circulating beam in the RCS. To study the beam loading effect in the CSNS/RCS theoretically, the RLC circuit model of the rf cavity, the method of Fast Fourier Transform and the method of Laplace transform have been employed to obtain the impedance of the rf system, the beam spectrum and the beam-induced voltage, respectively. Based on these physical models, the beam dynamics equations have been revised and a beam loading model has been constructed in the simulation code ORIENT. By using the code, the beam loading effect on the rf system of the CSNS/RCS has been investigated. Some simulation results have been obtained and conclusions have been drawn.     

Mode error analysis of impedance measurement using twin wires

Both longitudinal and transverse coupling impedance for some critical components need to be measured for accelerator design. The twin wires method is widely used to measure longitudinal and transverse impedance on the bench. A mode error is induced when the twin wires method is used with a two-port network analyzer. Here, the mode error is analyzed theoretically and an example analysis is given. Moreover, the mode error in the measurement is a few percent when a hybrid with no less than 25 dB isolation and a splitter with no less than 20 dB magnitude error are used.     

成都市绿地系统土壤总汞的测定

拟定了成都市绿地系统各土壤功能区总汞含量的测定方法。样品经湿法消解后,用氢化物发生-原子荧光光谱法测定绿地土壤中的总汞。在选定的条件下,仪器检出限可达0.01ng/mL。相对标准偏差（RSD）为1.7%。样品回收率在91.0%—94.0%之间;成都市绿地土壤中公共绿地总汞含量在0.1491—9.719mg/kg之间;交通干道绿地总汞含量在0.1841—2.879mg/kg之间;居住绿地总汞含量在0.3111—2.861mg/kg之间。     

聚己内酯-b-聚丙烯酸胶束溶液对碳酸钙结晶的研究

以CaCl₂和Na₂CO₃为原料, 研究CaCO₃在聚己内酯-b-聚丙烯酸(PCL-b-PAA)胶束溶液中的结晶行为, 并探讨胶束溶液浓度对CaCO₃晶体组成及其形貌的影响. 采用氢核磁共振谱(¹H NMR)、透射电子显微镜(TEM), 傅里叶变换红外吸收光谱(FTIR)、X射线粉末衍射分析(XRD)、扫描电子显微镜(SEM)和电导率等测试手段对聚合物结构、胶束形貌和CaCO₃晶型及形貌进行表征. 结果表明, PCL-b-PAA胶束影响了CaCO₃的结晶过程, 得到了不易在水中存在的处于亚稳态的球霰石型CaCO₃晶体. 随胶束浓度的增加, 球霰石型CaCO₃的含量先增加而后减少|CaCO₃晶体的主要形貌由无规则形转变为球形.     

Advanced high-pressure plasma diagnostics with hairpin resonator probe surrounded by film and sheath

The hairpin probe using microwave resonance in plasma is applicable to high pressure 1.33×10 3-1.01×10 5 Pa)) as developed recently.In this work,an analytic model of the hairpin resonator probe surrounded by a thin dielectric layer and a sheath layer is proposed.The correction factor due to these surroundings is analytically found and confirmed by electromagnetic field finite difference time domain simulation,thus enabling the accurate measurement of electron density in a high-pressure non-equilibrium uniform discharge.     

炮体表面瞬态温度分布的散斑干涉测试研究

为了可以实现对炮体表面瞬态温度分布变化的实时监测,同时克服传统瞬态高温测试仪器单点探测以及热惯性大等局限性,设计了基于散斑干涉与光谱频域分析相结合的瞬态温度分布测试系统。系统采用散斑干涉技术将炮体瞬态温度变化引发的微小形变转换成散斑干涉条纹,再由傅氏变换完成干涉条纹形变到光谱分布的函数转换,从而通过光谱分布函数反演任意采样时刻上的温度分布。实验采用ZX-FB1型光纤测温仪测试单点位置上瞬态温度作为标准值,再由555 nm激光器与面阵CCD采集散斑干涉条纹,分别使用图像识别法与傅氏变换法完成干涉条纹与瞬态温度的算法匹配,从而反演瞬态温度。实验结果显示,两种方法均能实现瞬态温度检测,但基于傅氏变换频谱分析的散斑干涉法精度更高,并且可以有效地克服由表面瑕疵、漆面磨损等问题造成的粗大误差。