Study of the beam loading effect in the CSNS/RCS

The China Spallation Neutron Source/Rapid Cycling Synchrotron (CSNS/RCS) accelerates a high-intensity proton beam from 80 MeV to 1.6 GeV. Since the beam current and beam power is high, the beam loading is a severe problem for the stability of the circulating beam in the RCS. To study the beam loading effect in the CSNS/RCS theoretically, the RLC circuit model of the rf cavity, the method of Fast Fourier Transform and the method of Laplace transform have been employed to obtain the impedance of the rf system, the beam spectrum and the beam-induced voltage, respectively. Based on these physical models, the beam dynamics equations have been revised and a beam loading model has been constructed in the simulation code ORIENT. By using the code, the beam loading effect on the rf system of the CSNS/RCS has been investigated. Some simulation results have been obtained and conclusions have been drawn.     

Mode error analysis of impedance measurement using twin wires

Both longitudinal and transverse coupling impedance for some critical components need to be measured for accelerator design. The twin wires method is widely used to measure longitudinal and transverse impedance on the bench. A mode error is induced when the twin wires method is used with a two-port network analyzer. Here, the mode error is analyzed theoretically and an example analysis is given. Moreover, the mode error in the measurement is a few percent when a hybrid with no less than 25 dB isolation and a splitter with no less than 20 dB magnitude error are used.     

中国散裂中子源快循环同步加速器中色品校正及六极磁铁非线性效应

中国散裂中子源（CSNS）快循环同步加速器（RCS）把能量为80 MeV的束流储存并加速到1.6 GeV然后引出到靶站。为了减少RCS中的束流损失，有必要对RCS做色品校正，并减小动量偏移对束流光学的影响。尝试了多种色品校正方案并对不同色品校正方案做了比较。用三维跟踪程序SIMPSONS研究了色品校正六极铁与空间电荷效应对束流的影响。色品校正六极铁可以有效减小色品引起的频散，但是由于六极铁为非线性元件，导致不同振幅的粒子间有一定频散。模拟发现同时存在空间电荷效应和色品校正六极铁时，会有少量的束流损失。     

Study of eddy current power loss in an RCS vacuum chamber

In a Rapid Cycling Synchrotron (RCS), power loss due to an eddy current on the metal vacuum chamber would cause heating of the vacuum chamber. It is important to study the effect for estimating eddy current induced power loss and temperature growth. Analytical formulas for eddy current power loss for various types of vacuum chambers are derived for dipole and quadrupole repectively. By using the prototype of dipole of CSNS/RCS, an experiment was done to test the analytical formula. The derived formulas were applied to calculating the eddy current power loss on some special structures of an RCS vacuum chamber.     

Study on application of independent component analysis in the CSNS/RCS

The China Spallation Neutron Source (CSNS) accelerators consist of a low energy H linac and a high energy proton Rapid Cycling Synchrotron (RCS). The proton beam is accumulated in the RCS and accelerated from 80MeV to 1.6GeV with a repetition of 25Hz. Independent component analysis (ICA) is a robust method for processing the collected data (samples) recorded by the turn-by-turn beam position monitor (BPM), which was recently applied to the accelerator. The samples are decomposed to source signals, or the so-called independent components, which correspond to the inherent motion of samples, such as betatron motion and synchrotron motion. A study on the application of the ICA method to CSNS/RCS has been made. It shows that the beta function, phase advance, and dispersion can be well reconstructed by using ICA in CSNS/RCS. The effects of BPM errors on the ICA results are also studied. By comparing the different solving methods in ICA, the so-called SOBI has more advantages for isolating the independent components on the application of ICA to CSNS/RCS. Beam emittance dilution in the process of exciting the turn-by-turn samples is considered,and thus an RF kicker is adopted to avoid such emittance growth.     

非晶硅薄膜的快速热退火机理研究

采用RTA方法对PECVD沉积的a-S i:H薄膜进行固相晶化是近年来发展起来的一种制备多晶硅薄膜的新方法。通过研究不同退火工艺条件对薄膜结构的影响,来揭示快速热退火机理。研究表明短波长光(≤730nm)的量子效应在晶化过程中可能起着至关重要的作用。     

300MeV质子同步加速器概念设计优化（英文）

目前处于设计阶段的哈尔滨工业大学空间辐照效应装置,其核心部件是由1台10 MeV的注入器、1台300MeV的同步加速器以及输运线构成的加速器装置。同步加速器中引出的质子束流被用于辐照研究。基于装置的概念设计,优化了其同步加速器部分的设计。设计了新的磁聚焦结构,优化了基于新的磁聚焦结构的多圈注入系统的凸轨变化模式,提高了注入效率。为了更好地优化引出束流的时间结构,慢引出系统采用了RF knock-out的方法。为了满足精准辐照的要求,研究了RF Kicker的频率调制,发现RF Kicker的双频调制能使得引出束流更均匀。A research complex for aerospace radiation effects research is in the designing stage in Harbin Institute of Technology. Its core part is a proton accelerator complex, which consists of a 10 MeV injector, a 300 MeV synchrotron and beam transport lines. The proton beam extracted from the synchrotron is utilized for the radiation effects research. Based on the conceptual design, the design study for optimizing the synchrotron has been done. A new lattice design was worked out, and the decreasing pattern of the bump of the multi-turn injection system was optimized to increase the injection efficiency. In order to improve the time structure of the extracted beam, a RF knock-out method is employed in the slow extraction system. To meet the requirement of accurate control of dose, the frequency modulation of the RF kicker is well investigated, and the dual frequency modulation has been found to have a better performance for a uniform spill.     

Introduction to the overall physics design of CSNS accelerators

The China Spallation Neutron Source (CSNS) is an accelerator-based facility. The     

N型半导体金刚石的研究现状与展望

作为半导体材料的金刚石具有宽的禁带宽度和高的热导率、介质击穿场强等优异性质,因此其应用前景广阔.P型金刚石发展较N型金刚石成熟.因为缺乏可实用的N型金刚石材料,这使得金刚石半导体器件的应用难以实现.因此N型半导体金刚石成为研究者关注的焦点.论文从掺杂元素和制备方法两方面详细介绍了国内外N型金刚石的研究现状.硼与磷或硫元素共掺杂获得N型金刚石的研究取得了较大进展;利用化学气相沉积法和离子注入法制备N型半导体金刚石研究较多且取得了一定进展.高压高温下的温度梯度法便于掺杂调控金刚石性能,因而利用该法合成N型半导体金刚石大单晶值得尝试.