醋酸纤维素/PET接枝共聚物的制备及性能

以低数均分子量的聚对苯二甲酸乙二醇酯(PET)、二醋酸纤维素(CDA)为原料,异孚尔酮二异氰酸酯(IPDI)为接枝剂,二月桂酸二丁基锡(DBTDL)和离子液体1-丁基-3-甲基咪唑氯盐为催化剂制备得到新型的接枝共聚物CDA-g-PET。对接枝过程进行了优化,研究了催化剂种类与接枝剂用量对接枝过程的影响,利用红外分析和广角X射线衍射分析探究了接枝机理。同时对CDA-g-PET膜进行力学性能测试,探讨了PET的加入量对CDA-g-PET膜力学性能的影响。结果表明:PET通过化学键连接接枝到CDA上,接入的PET降低了CDA的结晶性;采用DBTDL与离子液体作为联合催化剂,接枝时间由7d缩短至8h;当接枝剂IPDI的加入量,即n(IPDI)/n(PET)为1.05~1.10时CDA-g-PET无交联;随着PET含量的增加,CDA-g-PET膜与CDA膜相比拉伸强度仅降低6.55%~27.24%,断裂伸长率增加149.89%~177.81%。     

基于2(5H)-呋喃酮的C—C成键反应研究进展

2(5H)-呋喃酮具有多个反应位点,同时其骨架广泛存在于许多天然产物的结构中,因此2(5H)-呋喃酮的衍生化反应具有重要的研究意义.一些简单的2(5H)-呋喃酮分子,如3-位(或4-位)卤代的2(5H)-呋喃酮、5-位无取代基的2(5H)-呋喃酮以及4-羟基-2(5H)-呋喃酮及其衍生物等,可以与有机金属化合物、卤代烃、有机硼化合物、不饱和烃以及不饱和C=X(X=O、N)等多种试剂作用,分别在2(5H)-呋喃酮骨架的3-位、4-位、5-位等不同位置上构建C—C键.鉴于此,以反应试剂为分类依据,综述了近年来基于2(5H)-呋喃酮骨架的C—C成键反应,总结了它们在有机合成方法学中及其生物活性化合物合成应用中的新进展,并指出进一步实现2(5H)-呋喃酮C—C成键反应的绿色化及其高效多环化利用是未来的重要研究方向.     

板条放大器同步泵浦的宽调谐MgO:PPLN中红外光参量振荡器（英）

搭建了Nd:YVO4/SESAM锁模激光器,采用LDA泵浦的Innoslab对其进行功率放大,最后同步泵浦MgO:PPLN实现了宽调谐皮秒中红外光参量运转。通过改变MgO:PPLN的温度和通道,实现了信号光1415~1557 nm、闲频光3362~4290 nm范围的宽调谐输出,其中最高的光光转换效率为17.5%。同步泵浦功率为16 W,脉冲重复频率为116.9 MHz时,同时获得1.33 W的1518 nm信号光和1.26 W的3558 nm闲频光输出。     

基于遗传算法优化BP神经网络的高炉喷煤优化

高炉炼铁是一个复杂的多变量系统,而现行的操作制度是基于炉长经验的参数设置模式,导致能源尤其是煤粉的消耗常常处于“盲目”状态。本文综合炼铁工艺理论和高炉专家经验,针对白云鄂博矿石冶炼的特殊性,采用筛选出的优化数据,利用遗传算法所固有的全局搜索性能优化BP神经网络模型的权值和阈值,分别建立了基于遗传算法优化BP神经网络的高炉喷煤量优化预测模型以及工艺指标(铁水[Si]含量及入炉焦比)预测模型。优化数据的利用使得上述模型可以根据高炉当前炉况输出喷煤量的最佳优化设定值,并预测出相对应的工艺指标变化趋势。实际应用表明,本方法能够给现场操作人员提供操作指导,实现高炉稳定顺行、提高经济效益的目的。     

Highly efficient reduced graphene oxide mode-locked Nd:GGG laser

We report, for the first time to our knowledge, a diode-end-pumped passively mode-locked(ML) Nd-doped gadolinium gallium garnet laser based on a chemically reduced graphene oxide(RGO) saturable absorber mirror. The ML laser gives a pulse duration of 15.1 ps under the maximum average output power of 1.44 W, corresponding to a slope efficiency of 21.1%. The single-pulse energy and peak power are 21.6 n J and 1.43 k W, respectively. The results indicate that our RGO saturable absorber has promising prospects for applications in high-power and high-efficiency ultrafast lasers.     

Wildly Tunable,High-Efficiency MgO：PPLN Mid-IR Optical Parametric Oscillator Pumped by a Yb-Fiber Laser

We demonstrate a wildly tunable, high-eFficiency mid-infrared （mid-IR） output-coupled single resonant optical parametric oscillator （OC-SRO） pumped by a Yb-fiber laser. The compact mid-infrared source employs a 50- mm-long, multi-grating MgO-doped periodically poled lithium niobate （MgO-PPLN） crystal, providing as much as 1.73 W idler power at 3.012#m, and 1.27W signal power at 1645nm, corresponding to an overall conversion efficiency of 41.7% and a slope efficiency of 77.9%. In particular, the mid-infrared output power of 1.03 W and 0.67W are obtained at 3.7μm and 3.9μm, respectively, with an optical-to-optical conversion efficiency of 14.3% and 9.3%. Furthermore, the idler light is tunable from 3 μm to 3.9 μm by changing the periods from 31 to 28.5μm, with the output power 〉1 W over 78% of the tuning range. Our experimental results are pump power limited and further mid-IR power and conversion efficiency could be obtained with a suitable high-power pump source. The total OC-SRO output power rms at 2.6 W is about 0.6% during 2 h measurement.