Signals of a Weibel instability in the melting color glass condensate

Based on our work hep-ph/0510121, we discuss further the numerical study of classical SU(2) 3+1-D Yang-Mills equations for matter produced in a high-energy heavy-ion collision. The growth of the amplitude of fluctuations as exp(Γ ) (where g ²μ is a scale arising from the saturation of gluons in the nuclear wave function) is shown to be robust over a wide range of initial amplitudes that violate boost invariance. We argue that this growth is due to a non-Abelian Weibel instability, the scale of which is set by a dynamically generated plasmon mass. We discuss the relation of Γ to the prediction from kinetic theory.     

射频感应耦合低压等离子体特性分析

采用光谱诊断法和Langmuir单探针法对射频感应耦合Ar气等离子体特性进行分析。通过光栅光谱仪研究了低气压下Ar气等离子体的光谱强度的变化特性,采用Langmuir单探针法测量不同条件下电子密度和电子温度。等离子体发射光谱的光谱强度随着气压和功率的增加而增强,射频功率对光谱强度的影响较明显。当功率从120W增加到180W时,光谱强度将会迅速增加,等离子体发生E模向H模的模式转换。Langmuir单探针法测量的电子密度和电子温度在的变化规律符合E模向H模转换的变化规律。     

2.45 GHz ECR离子源的微波阻抗匹配

ECR离子源的等离子体阻抗对其微波传输与阻抗匹配设计至关重要。在中国科学院近代物理研究所现有的2.45 GHz ECR 质子源上,对等离子体阻抗进行了测量。首先用水吸收负载代替等离子体负载测量得到了所用微波窗阻抗,然后根据质子源测量数据,推算得到了等离子体阻抗。实验结果表明,脊波导输出端阻抗与后续负载不完全匹配,等离子体阻抗随微波功率变化呈非线性。这些结果为ECR离子源过渡匹配和微波窗的设计提供了参考依据。Plasma impedance of an ECR ion source is important for microwave transmission and impedance matching design. Plasma impedance was measured indirectly with the 2.45 GHz ECR proton source at the Institute of Modern Physics, Chinese Academy of Sciences. In the test, we got microwave window mpedance by using water absorption load instead of plasma load, and the source plasma impedance was derived from the test data with the 2.45 GHz ECR proton source and microwave window impedance. The experimental results show that ridge waveguide output impedance and the subsequent load does not exactly match, plasma impedance variation is nonlinear with microwave power. The achievedresult is useful in the design of ridged waveguide and microwave window.     

Improving the Mechanical Properties of Polycarbonate Nanocomposites with Plasma‐Modified Carbon Nanofibers

The mechanical properties of polycarbonate film embedded with carbon nanofibers were studied based on plasma surface modification of carbon nanofibers by the use of polystyrene. The nanofiber surfaces were modified by various processing conditions including plasma polymerization power, nanofiber concentration, and ultrasonication time. The tensile strength and Young's modulus of the carbon nanofiber‐polycarbonate composites were then measured. The mechanical behavior of the composite was found to be affected by dispersion of the nanofibers. Higher plasma power resulted in improved mechanical strength. A maximum strength (10% increase) was achieved at a low concentration (1 wt.%) of nanofibers. The optimization of ultrasonication time indicated that the maximum strength occurred at different times for the composites with different concentrations of the modified carbon nanofibers.     

Investigations of Pulse‐Plasma‐Polymer Coating on TiO2 Nanoparticles and Their Dispersion

An amorphous acrylic acid (AA) polymer coating was generated on TiO₂ nanoparticles through pulse radio frequency (RF) plasma polymerization. The AA plasma synthesis mechanism was studied by its optical emission spectrum. The chemical structures of AA–plasma‐polymer were carefully investigated by Fourier transform infrared spectroscopy (FTIR). The dispersion behaviors of AA‐coated and uncoated TiO₂ nanoparticles in glycol solution were characterized by ultraviolet absorbency and particle size distribution measurements. The results showed that the aggregation of TiO₂ nanoparticles in glycol solution was effectively lowered and the dispersion was improved a lot after AA–plasma‐polymer coating. The pulse plasma coating parameters played an important role in the dispersion enhancement of TiO₂ nanoparticles. By properly regulating the pulse discharge parameters, the system could gain the highest radical–monomer reactions rate, the most compatible functional groups on the nanoparticles, and the best dispersion in the background media.     

Direct Radioimmunoassay of Proinsulin and Insulin in Human Plasma by Chromatographic Technique

Specific method for direct radioimmunoassay of IRP and IRI separately in human plasma has been described. The method is used for extraction of total insulin and separation of IRP from IRI by paper chromatography to be assayed separately. The separation of the two components are indentified and confirmed by column chromatography, paper chromatography and U.V. spectral analysis in comparison with the standard compounds.

134 plasma samples of different cases were, investigated for determination of IRI, IRP and IRT, of which 39 normals, 16 normal obes, 21 juvinil diabetes, 18 adult oncet diabetes, 10 recent adult diabetes, 12 hypothroid and 18 bilharzial hepatosplenomegaly to evaluate the levels of the test in comparison with blood sugar concentration.     

氩、氢混合等离子体处理对GaAs表面性质及发光特性的影响

介绍了一种氩、氢混合等离子体清洗GaAs基片的实验工艺,深入研究了氩、氢等离子体清洗GaAs表面污染物和氧化层,并活化表面性能的基本原理,同时讨论了气体流量、溅射功率和清洗时间等不同溅射参数对等离子体清洗效果的影响。结果表明,在氩气和氢气流量分别为10 cm³/min和30 cm³/min,溅射功率为20 W,清洗时间为15 min的条件下,GaAs样品的光致发光强度提高达139.12%,样品表面的As-O键和Ga-O键基本消失。     

射频功率对类金刚石薄膜性能的影响

在不同射频功率条件下,实验研究了射频等离子体化学气相沉积类金刚石薄膜的金刚石相分数、光学常数和硬度。利用Raman光谱仪、椭圆偏振仪、数字式显微硬度计分别测试了不同条件下单层类金刚石薄膜的金刚石相分数、光学常数和硬度。实验表明,随着功率的增加,金刚石相的相对分数减少,薄膜的折射率先减小再增加然后减小,射频功率大于910 W时,沉积速率急剧增大。而薄膜的硬度先增加后减小,在射频功率为860 W处获得最大值。     

空间站快速充电事件的机理研究

空间站等大型航天器由于采用高压太阳电池阵而引发的 带电问题成为近年来航天器带电研究领域的热点问题. 近年来观测到国际空间站(ISS)在出地影瞬间产生的"快速带电"事件 (也称"异常带电") , 再度引起了对低轨道航天器充电效应的深入研究. "快速带电"事件的特征为, 集中出现在出地影的瞬间, 在几秒内快速上升到较高电位(30—70 V), 然后在几十秒时间内缓慢衰降, 相对高压电池阵本身引起的结构体带电(称为"正常带电", 一般在30 V以下)严重得多. 目前国际上对"快速带电"的研究尚不充分. 本文在Furguson等人机理研究工作的基础上, 首次建立了描述"快速带电"事件的物理模型, 定量揭示了其充电过程的主要机理. 根据该模型对国际空间站的"快速带电"进行计算, 结果与观测到的典型充电脉冲符合, 模型预测的快速带电事件的统计规律也与观测结果基本一致. 关键词： 表面充电 等离子体 空间站 高压太阳电池阵     

工作压强对射频辉光放电H2/C4H8等离子状态的影响

利用辉光放电技术采用等离子体质谱诊断的方法研究了不同工作 压强下H₂/C₄H₈混合气体等离子体中 主要正离子成分及其能量的变化规律, 并分析了压强对H₂/C₄H₈混合气体的离解机理以及主要正离子形成过程的影响. 结果表明: 随着工作压强的增加, 碳氢碎片离子的浓度和能量均逐渐减小. 当工作压强为5 Pa时, H₂/C₄H₈混合气体等离子体中C₃H₅⁺相对浓度最大; 压强为10 Pa时, C₃H₃⁺相对浓度最大; 压强为15, 20 Pa时, C₂H₅⁺相对浓度最大; 压强为25 Pa时, C₄H₉⁺相对浓度最大. 对H₂/C₄H₈等离子体中的主要组分及其能量分布所进行的定性分析, 将为H₂/C₄H₈混合气体辉光放电聚合物涂层的工艺参数优化提供参考技术基础. 关键词： 辉光放电技术 等离子体质谱诊断 工作压强