Structural and magnetic studies on spark plasma sintered SmCo5/Fe bulk nanocomposite magnets

SmCo₅+x wt% Fe (x=0$x=0$, 5 and 10) nanocomposite powders were synthesized by mechanical milling and were consolidated into bulk shape by spark plasma sintering (SPS) technique. The evolution of structure and magnetic properties were systematically investigated in milled powders as well as in SPS samples. A maximum coercivity of 8.9 kOe was achieved in spark plasma sintered SmCo₅+5 wt% Fe sample. The exchange spring interaction between the hard and soft magnetic phases was evaluated using δM–H measurements and the analysis revealed that the SPS sample containing 5 wt% Fe had a stronger exchange coupling between the magnetic phases than that of the sample with10 wt% Fe.     

Quantitative determination of BMS-378806 in human plasma and urine by high-performance liquid chromatography/tandem mass spectrometry

BMS-378806 is a human immunodeficiency virus (HIV) entry inhibitor that is being developed for the oral treatment of HIV infection. Human plasma and urine LC/MS/ MS methods have been developed and validated for the quantitation of BMS-378806. For human plasma method, methyl t-butyl ether was used to extract BMS-378806 from plasma in a 96-well format, and the organic layers were dried down and then reconstituted for the injection, while a dilute-and-shoot approach was used for human urine method in a 96-well format. Chromatographic separation was achieved isocratically on a Phenomenex C18 (2) Luna column (2 x 50 mm2, 5 microm). The mobile phase contained 60:40 v/v of 0.1% formic acid in water and ACN. Detection was by positive ion electrospray MS/MS. The standard curves ranged from 1.25 to 1000 ng/mL for the plasma assay and from 10 to 5000 ng/mL for the urine assay. The curves were fitted to a 1/x2 weighted quadratic regression model for both methods. The validation results demonstrated that both methods had satisfactory precision and accuracy across the calibration ranges. The methods were applied to the analysis of human plasma and urine samples from a single ascending dose clinical study to assess the pharmacokinetics of the drug. The pharmacokinetic analysis results indicated the absorption and disposition of the drug was rapid. The systemic exposure of BMS-378806 was generally dose proportional among the doses from 100 to 1200 mg, but not dose proportional to 1600 mg. There were modest increases in the systemic exposure when the drug was given with food or given as a solution formulation. Renal excretion was not a substantial elimination pathway of the drug. BMS378806 was safe and well tolerated over a dose range of 100-1600 mg administered as a single oral dose.     

Proteomic approach for purification of seminal plasma proteins involved in tumor proliferation

Human seminal plasma contains a large array of proteins required for the normal physiology and metabolism of spermatozoa. These are mainly secreted from prostate epithelium, testes, and seminal vesicles. Fortunately, many of these are found to be present at elevated concentration in seminal plasma and act as a biomarker of different carcinomas as their levels are also enhanced in serum and are found to be involved in tumor progression and metastasis apart from fertility. The proteins which were overexpressed in the seminal plasma of prostate carcinoma patients were identified by 2-DE and MALDI-TOF/MS. We have designed a strategy to purify these four proteins prostate specific antigen (PSA), prostatic acid phosphatase (PAP), Zinc alpha2-glycoprotein (ZAG), and progastricsin (PG), together in homogeneity by using simple chromatographic techniques. Acidic and basic fractions of human seminal plasma were separated by ion exchange chromatography and further purified by gel permeation chromatography. Our results form a new and valuable resource for those attempting structure-based drug designing for prostate and other cancers where the amount of proteins is required in plenty and in native form.     

Hydroxymethylfurfural: an enemy or a friendly xenobiotic? A bioanalytical approach

Hydroxymethylfurfural (HMF), a well-known heterocyclic Maillard reaction product, has often been studied for its potential toxic, mutagenic, and carcinogenic effects. Recent clinical studies, however, have strongly suggested that HMF might have exciting antitumor potential. We report on the development and validation of a bioanalytical assay for HMF that could be suitable as a basis for pharmacokinetic models in cancer patients. Two strategies were tested, i.e., direct and indirect methodologies. A direct isocratic LC determination at 283 nm was designed. Two indirect attempts involved derivatization coupled to HPLC-UV. It was possible to resolve the stereoisomers of the HMF derivative, and factors influencing their equilibrium ratio are discussed. HMF was extracted from the biomatrix by solid-phase extraction using different cartridges. A comparative study was made of the implemented methods as well as the extraction protocols. Both indirect assays proved to be more sensitive and were used to assess HMF quantitatively in human plasma. However, the newly introduced derivatization conditions led to the highest sensitivity with a LOD (S/N ratio = 3) of at least 2 pmol analyte on column. The assay selectivity was satisfactory in pre- and post-dose real samples. The mean recoveries of the assays were 79% and 89%, with acceptable accuracies and reproducibilities. Figure Schematic representation of hydroxymethylfurfural (HMF) in human plasma     

Hydride generation activity of arsenosugars and thioarsenicals

The major arsenosugar compounds have been reported to be hydride-generation-active, however to a lesser extent in comparison with the inorganic arsenicals. We report here for the first time the identity and quantity of the volatile arsenicals generated by As-sugar-SO₃, As-sugar-SO₄, dimethylarsinoyl acetic acid and dimethylarsinoyl ethanol. Only one major volatile compound was identified for all four compounds studied: dimethylarsine. This means that the As–C bond to the longer carbon chain was cleaved during the hydride-generation process. Theoretical calculations at the RHF/6-31G(d,p) ab initio level confirm that this As–C bond is much weaker than the As–CH₃ bonds. Furthermore, it was revealed that the sulphur analogue of dimethylarsinic acid (DMAS ) is hydride-generation-active at pH 7 in contrast to dimethylarsinic acid, despite the fact that arsenic is also pentavalent. This has been substantiated by the calculation of the change in susceptibility of the arsenic towards nucleophilic attack when oxygen is replaced by sulphur. Hence, DMAS can easily be mistaken for a trivalent arsenic species.     

Effect of acid concentration on closed-vessel microwave-assisted digestion of plant materials

The efficiency of microwave-assisted acid digestion of plants using different concentrations of nitric acid (2.0, 3.0, 5.0, 7.0 and 14 mol l⁻¹) with hydrogen peroxide (30% v/v) was evaluated by measuring the residual carbon content (RCC) using inductively coupled plasma optical emission spectrometry (ICP-OES) with axial viewing. Certified reference materials were used for evaluating the accuracy attained when 2 mol l⁻¹ HNO₃ was employed for digestion. Under all experimental conditions RCC values were always lower than 13% w/v, and even the highest concentration did not cause any interference with element recovery. It seems that the high pressure reached for closed-vessel operation improved the oxidative action of nitric acid due to consequent temperature increase, even when this reagent was not used at high concentrations. According to acid–base titration data, residual acid in the digestates varied from 1.2 to 4.0 mol l⁻¹, depending on the acid concentration initially added. It can be concluded that for plant materials, microwave-assisted acid digestion can be carried out under mild conditions, which implies that digestates do not need extensive dilution before introduction by pneumatic nebulization to ICP-OES. An additional advantage is the lower amount of residue generated when working with less concentrated acid solutions.     

Applications of inductively coupled plasma mass spectrometry and laser ablation inductively coupled plasma mass spectrometry in materials science

Inductively coupled plasma mass spectrometry (ICP-MS) and laser ablation ICP-MS (LA-ICP-MS) have been applied as the most important inorganic mass spectrometric techniques having multielemental capability for the characterization of solid samples in materials science. ICP-MS is used for the sensitive determination of trace and ultratrace elements in digested solutions of solid samples or of process chemicals (ultrapure water, acids and organic solutions) for the semiconductor industry with detection limits down to sub-picogram per liter levels. Whereas ICP-MS on solid samples (e.g. high-purity ceramics) sometimes requires time-consuming sample preparation for its application in materials science, and the risk of contamination is a serious drawback, a fast, direct determination of trace elements in solid materials without any sample preparation by LA-ICP-MS is possible. The detection limits for the direct analysis of solid samples by LA-ICP-MS have been determined for many elements down to the nanogram per gram range. A deterioration of detection limits was observed for elements where interferences with polyatomic ions occur. The inherent interference problem can often be solved by applying a double-focusing sector field mass spectrometer at higher mass resolution or by collision-induced reactions of polyatomic ions with a collision gas using an ICP-MS fitted with collision cell. The main problem of LA-ICP-MS is quantification if no suitable standard reference materials with a similar matrix composition are available. The calibration problem in LA-ICP-MS can be solved using on-line solution-based calibration, and different procedures, such as external calibration and standard addition, have been discussed with respect to their application in materials science. The application of isotope dilution in solution-based calibration for trace metal determination in small amounts of noble metals has been developed as a new calibration strategy. This review discusses new analytical developments and possible applications of ICP-MS and LA-ICP-MS for the quantitative determination of trace elements and in surface analysis for materials science.     

SPE及纳米金涂层毛细管电泳检测血浆中土霉素与多西环素

建立了混合型固相萃取及季铵化纤维素负载的纳米金涂层毛细管电泳法快速检测血浆中土霉素和多西环素的方法。采用季铵化纤维素负载的纳米金复合材料(QC-Au NPs)对毛细管内壁进行动态涂层,以抑制管壁对分析物的吸附,并对缓冲液p H值进行优化。结果表明,该涂层能改善峰形和分离度,提高分离效率,其中土霉素的柱效提高了17.9倍。在涂层毛细管中,土霉素和多西环素的吸附被抑制,并在4 min内出峰。在10~200μg/m L范围内,土霉素和多西环素的峰面积与浓度的线性关系良好,相关系数(r)分别为0.997 6和0.995 2。血浆中土霉素和多西环素的加标回收率为88%~107%,相对标准偏差(RSD)为1.4%~7.7%。该方法快速、简便,准确度和精密度高,适用于血浆中土霉素和多西环素的快速检测。     

Cadmium (II) imprinted 3-mercaptopropyltrimethoxysilane coated stir bar for selective extraction of trace cadmium from environmental water samples followed by inductively coupled plasma mass spectrometry detection

Cd(II) imprinted 3-mercaptopropyltrimethoxysilane (MPTS)-silica coated stir bar was prepared by sol–gel technique combining with a double-imprinting concept for the first time and was employed for stir bar sorptive extraction (SBSE) of trace Cd(II) from water samples followed by inductively coupled plasma mass spectrometry (ICP-MS) detection. A tetramethoxysilane (TMOS) coating was first in situ created on the glass bar surface. Afterward, a sol solution containing MPTS as the functional precursor, ethanol as the solvent and both Cd(II) and surfactant micelles (cetyltrimethylammonium bromide, CTAB) as the template was again coated on the TMOS bar. The structures of the stir bar coating were characterized by FT-IR spectroscopy. Round-bottom vial was used for the extraction of Cd(II) by SBSE to avoid abrasion of stir bar coatings. The factors affecting the extraction of Cd(II) by SBSE such as pH, stirring rate and time, sample/elution volume and interfering ions have been investigated in detail, and the optimized experimental parameters were obtained. Under the optimized conditions, the adsorption capacities of non-imprinted and imprinted coating stir bars were found to be 0.5 μg and 0.8 μg bar⁻¹. The detection limit (3σ) based on three times standard deviations of the method blanks by 7 replicates was 4.40 ng L⁻¹ and the relative standard deviation (RSD) was 3.38% (c = 1 μg L⁻¹, n = 7). The proposed method was successfully applied for the analysis of trace Cd(II) in rain water, East Lake and Yangtze River water. To validate the proposed method, certified reference material of GSBZ 50009-88 environmental water was analyzed and the determined value is in a good agreement with the certified value. The developed method is rapid, selective, sensitive and applicable for the analysis of trace Cd(II) in environmental water samples.     

Dispersive Liquid–Liquid Microextraction and Micro-Solid Phase Extraction for the Rapid Determination of Metals in Food and Environmental Waters

A rapid and novel two-step dispersive liquid–liquid microextraction and dispersive micro-solid phase extraction method was established for the separation and enrichment of trace cadmium, nickel, and copper in food and environmental water prior to determination by inductively coupled plasma-mass spectrometry (ICP-MS). In the first microextraction step, carbon tetrachloride was employed to extract metal-diethyldithiocarbamate chelates from aqueous solution with ultrasound. In the following step, Fe₃O₄ magnetic nanoparticles were added and used to collect the analytes in the organic solvent. The sample pH, type and volume of extraction solvent, mass of magnetic nanoparticles, concentration of the chelating agent, concentration of sodium chloride, and sonication time were optimized. The linear dynamic range was from 0.01 to 20 micrograms per liter with correlation coefficients between 0.9990 and 0.9992. Enrichment factors were 78, 79, and 81 for cadmium, nickel, and copper, respectively. The limits of detection for cadmium, nickel, and copper were 0.007, 0.009, and 0.017 micrograms per liter, with relative standard deviations from 1.1 to 2.6 percent. The developed method was validated by the determination of cadmium, nickel, and copper in rice and mussel certified reference materials, food, and environmental water with satisfactory results.