Hydrothermal synthesis of (Fe,N) co-doped TiO<Subscript>2</Subscript> powders and their photocatalytic properties under visible light irradiation

(Fe, N) co-doped titanium dioxide powders have been prepared by a quick, low-temperature hydrothermal method using TiOSO₄, CO(NH₂)₂, Fe(NO₃)₃, and CN₃H₅ · HCl as starting materials. The synthesized powders were characterized by XRD, TEM, BET, XPS, and UV–Vis spectroscopy. Experimental results show that the as-synthesized TiO₂ powders are present as the anatase phase and that the N and Fe ions have been doped into the TiO₂ lattice. The specific surface area of the powders is 167.8 m²/g by the BET method and the mean grain size is about 11 nm, calculated by Scherrer’s formula. UV–Vis absorption spectra show that the edge of the photon absorption has been red-shifted up to 605 nm. The doped titanium dioxide powders had excellent photocatalytic activity during the process of photo-degradation of formaldehyde and some TVOC gases under visible light irradiation.     

MnO2/ZSM-5上臭氧协同催化去除甲醛的性能研究

采用浸渍法制备了不同MnO2负载量的催化剂,用BET分析、X射线衍射等手段对其进行了分析,并考察了在MnO2/ZSM-5催化剂上臭氧协同催化去除甲醛的性能.结果显示:相对于单一的MnO2和ZSM-5,MnO2/ZSM-5复合催化剂具有更高的催化活性,其中10%MnO2/ZSM-5性能最佳,一次性去除效率可达到47%左右,制备所得到的催化剂有较强的稳定性,连续工作120h去除效率基本不变.     

Picomole‐level Formaldehyde Determination in Gaseous and Beer Samples Using Flow Injection Chemiluminescence Analysis

Based on the linear enhancement of formaldehyde (FA) within 7.0 ～ 1000 pmol l^?1 on luminol—bovine serum albumin (BSA) chemiluminescence (CL) system, FA determination in air and beer samples using CL with flow injection (FI) was proposed. The detection limit was 2.5 pmol l^?1 (3σ) and the relative standard deviations were less than 4.5% (n = 7). At a flow rate of 2.0 mL min^?1, a whole analysis from sampling to washing only needed 32 s, offering a sample throughput of 112 h^?1. This proposed method was successfully utilized to determine FA vapor pressure in liquid (121.8 ± 3.8 Pa), FA content in real air sample (8.93 ± 0.03 mg m^?3), and FA levels in beer (199.5 ± 5.6 ～ 225.2 ± 3.5 mg l^?1), giving determination recoveries from 90.7% to 109.3%. The mechanism of BSA—FA interaction was also investigated, showing FA binding to BSA was a spontaneous process mainly through hydrogen bonding and van der Waals force by FI‐CL, with binding constant K of 1.89 × 10⁶ l mol^?1 and the number of binding sites n of 0.86. Molecular docking analysis further revealed FA could enter into the pocket at subdomain IIA of BSA, with K of 1.71 × 10⁵ l mol^?1 and ΔG of ‐29.68 kJ mol^?1.     

Silver nanoparticle decorated poly(2-aminodiphenylamine) modified carbon paste electrode as a simple and efficient electrocatalyst for oxidation of formaldehyde

This work describes the promising activity of silver nanoparticles on the surface of a poly(2-amino diphenylamine) modified carbon paste electrode (CPE) towards formaldehyde oxidation. Electrodeposition of the conducting polymer film on the CPE was carried out using consecutive cyclic voltammetry in an aqueous solution of 2-aminodiphenylamine and HCl. Nitrogen groups in the polymer backbone had a Ag ion accumulating effect, allowing Ag nanoparticles to be electrochemically deposited on the surface of the electrode. The electrochemical and morphological characteristics of the modified electrode were investigated. The electro-oxidation of formaldehyde on the surface of electrode was studied using cyclic voltammetry and chronoamperometry in aqueous solution of 0.1 mol/L NaOH. The electro-oxidation onset potential was found to be around -0.4 V, which is unique in the literature. The effect of different concentrations of formaldehyde on the electrocatalytic activity of the modified electrode was investigated. Finally, the diffusion coefficient of formaldehyde in alkaline media was calculated to be 0.47 × 10^-6 cm²/s using chronoamperometry.     

Synthesis and formaldehyde sensing performance of LaFeO3 hollow nanospheres

Metal oxide semiconductors with hollow structure and morphology have attracted considerable attentions because of their promising application on gas sensors. In this paper, LaFeO₃ hollow nanospheres have been prepared by using carbon spheres as templates in combination with calcination. Based on the observation of X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), and transmission electron microscope (TEM), the structure and morphology of the products were characterized. It has been revealed that as-prepared LaFeO₃ samples have a uniform diameter of around 300 nm and hollow structures with thin shells of about 30 nm consisting of numerous nanocrystals and nanopores. Owing to the hollow and porous structure, large surface area and more surface active sites, the sensor based on LaFeO₃ hollow nanospheres exhibited high response, good selectivity and stability to formaldehyde gas (HCHO). It suggests that the as-prepared LaFeO₃ hollow nanospheres are promising candidates for good performance formaldehyde sensor.     

Sub-millimolar determination of formalin by pulsed amperometric detection

Formalin, formaldehyde in the presence of methanol, was determined by pulsed amperometric detection (PAD). A triple waveform using E_det=−0.3 V (t_det=30 ms), E_oxd=+0.8 V (t_oxd=200 ms), and E_red=−0.8 V (t_red=350 ms) versus Ag/AgCl was applied at a Au electrode for detection in a flow injection (FI) system. The approach was rapid and yielded a sub-millimolar detection limit (0.0129 mM) with a dynamic range up to 100 mM. A precision of 8.8% R.S.D. at 1.0 mM for two hundred repetitive injections by the FI-PAD was obtained, whereas holding at a constant potential (−0.3 V versus Ag/AgCl) for anodic oxidation of formaldehyde caused the response to decrease dramatically after a few measurements. The method developed was used to analyze the formalin contents of water from rinsed samples of vegetables and fruit and ice-melt from seafood, and the method showed good agreement with the liquid chromatography (LC) method.     

皮革中甲醛含量测量不确定度评估

依据GB/T 19941-2005标准,测定了皮革中的甲醛含量,对测量结果的不确定度来源进行了分析和评定,并计算出合成不确定度和有效自由度,最后根据JJF1059规范要求给出了甲醛测量不确定度表达式.     

A novel fluorescent probe for formaldehyde based-on monomer-excimer conversion and its imaging in live cells

A novel fluorescent probe was developed for formaldehyde, which can be synthesized by one-step Buchwald–Hartwig reaction. When hydrazino-group of probe reacted with formaldehyde, hydrophobic reaction product aggregates into nanoparticles and results in the blue fluorescence due to the monomer-excimer effect. With enough sensitivity, high selectivity, good stability in physiological pH range and excellent biocompatibility, this probe can image formaldehyde in living cells.     

比久农药中游离偏二甲肼的高效液相色谱快速测定

建立了用甲醛衍生测定农药比久样品中微量的偏二甲肼的方法。采用甲醛与偏二甲肼柱前衍生,在室温、中性溶液中反应10 min,生成确定量的有较强紫外吸收的偏二甲腙,不须富集可直接用HPLC法测定偏二甲肼。研究了甲醛与偏二甲肼的反应条件及产物的光谱特征,测得衍生物的最大吸收波长λmax=237 nm和表观摩尔吸光系数ε=3.6×103(L.mol-1.cm-1),选定ZorbaxODS色谱柱,V(磷酸盐缓冲溶液,pH 7)∶V(甲醇)=94∶6为流动相,检测波长为237 nm。结果表明:在0.56~960μg/mL范围内回归方程为:A=0.4677ρ-0.2790,R2=0.9998,检出限为1.3μg/g,回收率为97.5%~103.4%,相对标准偏差为0.9%~1.8%。     

纳米铂微粒修饰电极上甲醛电催化氧化的电位振荡和电流振荡

通过阴极还原-阳极氧化法制备了钛基纳米铂微粒修饰电极, 扫描电镜观察发现, 分布于钛基体表面的氧化钛膜三维网状孔道中的纳米铂微粒具有高度分散状态. 采用多种电化学手段在该电极上不仅观察到甲醛在恒电流条件下产生的电位振荡, 而且在循环伏安和恒电位两种条件下均观察到强烈的电流振荡, 这进一步证明高度分散的纳米铂微粒使电极的催化活性大大提高, 促进了甲醛及其毒化中间产物的电催化氧化过程, 从而有利于电极上电化学振荡的产生. 研究结果还表明, 甲醛底物浓度、硫酸介质浓度、恒电位或恒电流大小等多种因素对振荡强度、范围或类型会产生规律性的影响.