锌粉-硼砂-硼酸熔融-碘酸钾滴定法测定高硅锡精矿中的锡

针对高硅锡精矿中锡的测定时通常用锌粉-氢氧化钠熔融,精密度差,不能满足分析要求的问题,建立了锌粉-硼砂-硼酸熔融,盐酸浸取,铝粒将锡还原,碘酸钾滴定法测定高硅锡精矿中锡的分析方法。方法结果稳定,精密度好,相对标准偏差在0.19%~0.55%,加标回收率在96.9%~105%。分析结果能够满足高硅锡精矿中锡的测定要求。     

Lights and Shadows of DMSO as Solvent for Tin Halide Perovskites

In 2020 dimethyl sulfoxide (DMSO), the ever-present solvent for tin halide perovskites, was identified as an oxidant for Sn^II. Nonetheless, alternatives are lacking and few efforts have been devoted to replacing it. To understand this trend it is indispensable to learn the importance of DMSO on the development of tin halide perovskites. Its unique properties have allowed processing compact thin-films to be integrated into tin perovskite solar cells. Creative approaches for controlling the perovskite crystallization or increasing its stability to oxidation have been developed relying on DMSO-based inks. However, increasingly sophisticated strategies appear to lead the field to a plateau of power conversion efficiency in the range of 10–15 %. And, while DMSO-based formulations have performed in encouraging means so far, we should also start considering their potential limitations. In this concept article, we discuss the benefits and limitations of DMSO-based tin perovskite processing.     

Visible Light Photocatalytic Activity of Porphyrin Tin(IV) Sensitized TiO2 Nanoparticles for the Degradation of 4-Nitrophenol and Methyl Orange

A stable metalloporphyrin sensitized TiO₂ (Degussa P25) photocatalyst was prepared by using trans-dihydroxo[5,10,15,20-tetraphenylporphyrin]tin(IV) (SnP) as a sensitizer in a simple impregnation process. The solid diffuse reflectance ultraviolet-visible (UV-vis) spectrum of the SnP sensitized TiO₂ photocatalyst (SnP-TiO₂) indicated that there existed interaction between SnP and TiO₂. It was found that SnP-TiO₂ exhibited an enhanced visible light photocatalytic activity as compared with that over P25 for the degradation of 4-nitrophenol (4-NP) and methyl orange (MO) in aqueous solutions. The mechanism exploration showed that the degradation of MO and 4-NP experienced two different ways, that is, MO was photodegraded by reactive oxygen species and 4-NP was directly photodegraded by the excited state of SnP. Furthermore, it was found that the loading content of SnP had an important influence on the photocatalytic activity of TiO₂. The maximum photocatalytic efficiency was achieved when the contents of SnP were 25 mg and 30 mg per gram TiO₂ for MO and 4-NP, respectively. Importantly, SnP-TiO₂ was particularly stable and the photocatalytic activity was hardly decreased after being recycled seven times in the presence of oxygen, which could be attributed to the easy reductive regeneration of SnP.     

原子荧光光谱法测定镉锭中锡的含量

采用氢化物发生-原子荧光光谱法测定镉锭中锡含量,研究了基体镉对锡的干扰及消除方法,优化了氢化物的发生条件,建立了镉锭中锡含量的快速分析方法。实验证明,原子荧光光谱法对锡的检出限为0.08mg/kg,回收率为99.0%～104.0%,方法准确、可靠,用于日常样品分析,取得了很好的效果。     

Mechanical and electrical response variation of the polyurethane–tin oxide–carbon nanotube composite microfiber depending on the chemical solution

Toward the goal of smart sensor systems for wearable electronics, polymer microfiber‐based free‐standing sensors benefit from excellent flexibility, decent ductility, and easy wearability in comparison with thin‐film‐based sensing devices. Herein, we report a hydrophobic and conducting single‐strand microfiber‐based liquid‐phase chemical sensor consisting of polyurethane (PU), tin oxide (SnO₂), and carbon nanotube (CNT) composites with applying a (1H,1H,2H,2H‐heptadecafluorodec‐1‐yl) phosphonic acid (HDF‐PA)‐based self‐assembled monolayer. The free‐standing HDF‐PA‐treated PU–SnO₂–CNT composite microfiber showing selective filtering properties with the repellency of water and the penetration of an organic solvent is electrically and mechanically characterized. Finally, the single‐strand HDF‐PA‐treated PU–SnO₂–CNT composite microfiber‐based chemical sensor, which shows excellent mechanical properties and aqueous stability, is demonstrated to detect the presence of a chemical in pure water or counterfeit gasoline in pure gasoline by observing mechanical changes, especially variations in the length and diameter of the fiber, and monitoring the electrical resistance change. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 495–502     

Micro-segregation model calculation of residual tin in boiler and pressure vessel steel

Tin is a typical residual element in steel and mainly originates from Sn-containing complex iron ore and steel scrap. The segregation of Sn in steel is harmful to the performances of steel. In this paper, the micro-segregation of residual element Sn during the solidification process of boiler and pressure vessel steel by micro-segregation model was studied. The results showed that the micro-segregation degree of Sn reduces apparently with the increase of cooling rate and remarkably deteriorates during the solidification process. When the initial content of C is higher than 0.1%, it will cause the solidification transform of the solid phase converting from the ferrite phase to austenite phase and the significant increase in the micro-segregation degree of Sn. However, increasing the initial contents of Si, Mn, P and S separately has non-significant effects on the micro-segregation degree of Sn. In addition, the improvement of initial content of Sn will lead to the micro-segregation degree decrease of Sn and has an inapparent impact on zero strength temperature and zero ductility temperature of the boiler and pressure vessel steel.     

Synergistic Effect of Oxalate and Ethylene Glycol on the Formation of SnO2 Rods

SnO₂ rods have been synthesized by using tin (II) chain‐like complexes as precursors in which oxalate and ethylene glycol act as co‐ligands. On the basis of experimental analysis, a reasonable formation mechanism of rods is discussed, which is further supported by Fourier transform infrared spectroscopy (FT‐IR). These results show that the synergistic effect of oxalate group and ethylene glycol plays an important role in the formation of long SnO₂ rods.     

Changes in the Structural Dimensionality of Selenidostannates in Ionic Liquids: Formation,Structures, Stability,and Photoconductivity

In situ transformations of selenidostannate frameworks in ionic liquids (ILs) were initiated by treatment of the starting phase K₂[Sn₂Se₅] and the consecutive reaction products by means of temperature increase and/or amine addition. Along the reaction pathway, the framework dimensionalities of the five involved selenidostannate anions develop from 3D to 1D and back, both in top‐down and bottom‐up style. Addition of ethane‐1,2‐diamine (en) led to the reversion of the 2D→1D step from 2D‐{[Sn₂₄Se₅₆]^16?} to 1D‐{[Sn₆Se₁₄]^4?}. As rationalized by DFT investigations, the 2D anion is thermodynamically favored. Photoconductivity measurements reveal that all samples show Schottky contact behavior with absolute thresholds below 10 V. One of the samples exhibits conductive states within the energy range of visible photons.     

Exploring the Reactivity of a Frustrated Sn/P Lewis Pair: The Highly Selective Complexation of the cis-Azobenzene Photoisomer

The reactivity of the geminal frustrated Lewis pair (FLP) (F₅C₂)₃SnCH₂P(tBu)₂ ( 1 ) was explored by reacting it with a variety of small molecules (PhOCN, PhNCS, PhCCH, tBuCCH, H₃CC(O)CH=CH₂, Ph[C(O)]₂Ph, PhN=NPh and Me₃SiCHN₂), featuring polar or non-polar multiple bonds and/or represent α,β-unsaturated systems. While most adducts are formed readily, the binding of azobenzene requires UV-induced photoisomerization, which results in the highly selective complexation of cis-azobenzene. In the case of benzil, the reaction does not lead to the expected 1,2- or 1,4-addition products, but to the non-stereoselective (tBu)₂PCH₂-transfer to a prochiral keto function of benzil. All adducts of 1 were characterised by means of multinuclear NMR spectroscopy, elemental analyses and X-ray diffraction experiments.