CSRm二极铁磁场分散性的研究

介绍了国家大科学工程HIRFL-CSR中主环二极磁铁的分散性测量的原理、测量方法，以及垫补的位置和垫补量与磁铁分散大小的关系. 最后给出了CSR主环二极磁铁最终垫补后的分散性结果、测量误差以及影响测量精度的因素.     

ADS注入器Ⅱ超导螺线管的初步测试

介绍了加速器驱动次临界系统（ADS）注入器Ⅱ束流聚焦单元超导螺线管的初步测试。 该测试在高度1 600 mm、 直径510 mm的垂直杜瓦中, 利用型号为cryogenic sms的超导电源对磁体进行了励磁, 并利用霍尔探头测试了其轴向磁场分布情况和漏场情况, 其中心磁场励磁后可达8.20 T, 漏场分布和计算值的相对误差小于10%。 同时, 对励磁过程中骨架的应力应变状态做了测试。 对测试结果的分析表明, 骨架结构设计合理, 应变状态变化平稳, 磁体低温稳定性能良好。The preliminary test of the superconducting solenoid for ADS injectorⅡhas been carried out in order to measure its performances. A vertical dewar with height 1 600 mm and outer diameter 510 mm was employed for this test. The magnet was energized by a cryogenic sms superconducting magnet current source. The axial magnetic distribution and leakage field were also tested through hall probes. The center field can be excited up to 8.20 T and the relative diviation between the measured value and the calculated value of the stray and leakage field is less than 10%. The measurements of the strain and stress status of the magnet skeleton show that the distortion is small and the mechanical performance is robust.     

中国科学院近代物理研究所磁体工程进展概述(英文)

本文着重论述了中国科学院近代物理研究所目前正在研制的三大磁体工程,它们包括重离子治癌工程(HIMM),强流重离子加速器(HIAF)工程,以及加速器驱动次临界系统(ADS)。在HIMM工程中的常规磁体建设中,着重介绍了联合运用钝化槽与活极头两项技术改善磁场品质的设计方法,并且运用Opera-3D设计软件,对该类高场常规磁体进行了数值分析,进一步地测量了该磁体磁场分布情况,相关的测量结果与数值模拟结果吻合良好。而对于正在处于预研阶段的HIAF工程中的快脉冲超导二极磁体,讨论了超导磁体的前期设计与结构优化技术,包括CACC超导线缆的结构设计,80 K冷屏与线圈盒结构的优化,力-磁耦合结构计算方法等。而在嬗变核废料处理的C-ADS注入器II中,核心部件是具有高磁场(高达7～8 T)的多层复合超导螺线管磁体结构,介绍了其在励磁和失超过程中相关磁学和力学多场实验测试工作。这些相关的设计和测量技术将为中国科学院近代物理研究所自主研制的磁体工程的物理和结构设计提供方法和指导。     

CR超导二极磁铁线圈受力分析

采用有限元分析的方法,以CR超导二极铁为研究对象,对其进行受力分析,分别计算线圈所受到的电磁力以及在此力作用下线圈发生的应变,线圈和相邻部分降温速率不均匀引起的热应力的分布以及线圈发生的应变.最后利用所得到的数据来校对线圈和线圈盒的强度,为结构的优化设计提供依据,并为失超保护提供可参考的数据.     

冷却储存环主环注入线二极磁铁测量

 介绍了兰州重离子加速器冷却储存环工程主环注入线二极磁铁的测磁系统和测磁结果。着重分析了垫补线圈和极头削斜两种手段对C型弯曲二极磁铁积分磁场径向分布均匀度的调节效果。并且分析了TOSCA三维磁场计算程序与实际测量结果之间的误差及其产生的原因。     

CR超导二极磁铁线圈受力分析

介绍了FAIR项目CR超导二极铁的线圈结构。 采用有限元分析方法， 对线圈的电磁力作用进行二维计算分析， 得到了线圈的二维位移变形和应力分布规律， 同时也分析计算了线圈、 线圈盒的三维受力以及位移形变， 为线圈盒和支撑结构的优化设计提供了参考依据。 Coil structure of CR superferric dipole for FAIR is presented in this paper. Finite Element Method(FEM) is used to calculate 2d magnetic force, displacement and stress distribution. 3d magnetic force and displacement of coil and coilcase are also analyzed, which shows that the design is fit for the desire result. Some results will be taken as a reference for further design.     

冷铁轭超导螺线管磁场的优化设计

文章介绍了冷铁轭超导螺线管磁场的优化设计.运用各种优化方法结合有限元磁场计算软件opera,依次对主线圈、冷铁轭、端部垫补线圈进行优化设计,最终达到设计要求.     

HIRFL-CSR complex

The construction and commissioning of HIRFL-CSR were finished in 2007. From 2000 to 2005 the subsystem and key devices of CSR were successfully fabricated, such as magnet, power supply, UHV system, e-cooler, electric-static deflector with the septum of 0.1 mm, and the fast-pulse kicker with the rise time of 150 ns. After that the CSR commissioning activities were performed in 2006 and 2007, including the accumulation of those heavy ions of C, Ar, Kr and Xe by the combination of stripping injection （STI） or multiple multi-turn injection （MMI） and e-cooling with a hollow e-beam, wide energy-range synchrotron ramping by changing the RF harmonic-number at mid-energy, the beam stacking in the experimental ring CSRe, the RIBs mass-measurement with the isochronous-mode in CSRe by using the time-of-flight method, and the ion beam slow-extraction from CSRm.     

冷铁轭超导螺线管磁场的优化设计

文章介绍了冷铁轭超导螺线管磁场的优化设计. 运用各种优化方法结合有限元磁场计算软件opera, 依次对主线圈、冷铁轭、端部垫补线圈进行优化设计, 最终达到设计要求.     

内置垫补线圈的C型二极磁铁

对HIRFL CSR的原形磁铁进行了试制和研究.尝试了一种新的改善磁场分布的方法:在不增大极头的条件下使用两根内置导线,实践证明是可行的.用OPERA 2D和TOSCA 3D软件分析了垫补电流对中、低场的影响,同时也介绍了这块C型二极磁铁的制作工艺及磁场测量结果. The C-type dipole prototypes in the injection beam line from a Separate Sector Cyclotron (SSC) to Cooling Storage Ring (CSR) are selected as R & D for CSR magnets fabrication, because they have large bending angle and small radius, and are very difficult to stack and fabricate. A method to obtain good field homogeneity has been attempted in the C-type dipole prototype. This method is not the enlarged dipole pole but two imbedded conductors and two small power supplies. This is easy operating....