固相萃取/气相色谱-质谱法测定燃香烟气中9种大麻素类新精神活性物质

建立了同时测定燃香烟气中9种大麻素类新精神活性物质的气相色谱－质谱（GC－MS）分析方法。样品在燃香烟气收集装置中经溶剂提取,浓缩离心后,采用HLB固相萃取小柱净化,毛细管色谱柱Agilent HP－5MS毛细管柱（30 m × 0.25 mm × 0.25 μm）分离,使用电子轰击电离（EI）源检测,SIM模式进行质谱监测,内标法对9种大麻素类化合物进行定量。结果表明,9种大麻素类化合物在27 min内完成分离分析,并在0.01～4.0 mg/L范围内具有良好的线性关系,相关系数（r2）均不小于0.999 5,方法的检出限（LOD,S/N＝3）和定量下限（LOQ,S/N＝10）分别为0.003～0.06 mg/L和0.01～0.2 mg/L。在阴性样品中进行1、2和10倍定量下限的加标回收实验,9种大麻素类化合物的回收率为74.8%～114%,相对标准偏差（RSD,n＝6）为1.6 %～9.1 %。采用该方法对10种市售的燃香样品进行测定,均未检出大麻素类化合物。建立的方法操作简便,可快速对燃香烟气中大麻素类化合物进行定性和定量分析,且能满足发烟量大燃香的检测需求。该方法的建立为我国燃香中大麻素类化合物的监测控制提供了参考。     

基于超高效液相色谱－串联质谱的不同加工干燥方法下的杜仲代谢组学分析

考察了不同加工干燥方法对杜仲整体代谢产物的影响。分别制备新鲜杜仲、堆置“发汗”、烫泡“发汗”和阴干杜仲样品,进行超高效液相色谱－串联质谱代谢组学分析。通过主成分分析（PCA）、正交偏最小二乘法判别分析（OPLS－DA）等多元统计分析方法,筛选出不同加工干燥方法下杜仲的差异代谢物,比较其相对含量。结果显示,4个组的杜仲样品在PCA得分图中可明显区分。与新鲜杜仲相比,杜仲加工干燥后有170种以上的代谢物发生显著变化,其中超过80%的代谢物表达上调。3种加工干燥方法之间,堆置“发汗”杜仲的上调代谢物数量较多,且有利于木脂素和香豆素类、环烯醚萜类、醌类成分的合成;阴干有利于酚酸类成分的保留,烫泡“发汗”则有利于黄酮类成分的保留。通过比较不同加工干燥方法下杜仲的差异代谢物,为探究杜仲药材的品质形成机制及优选其加工方法提供了科学依据。     

超高效液相色谱-四极杆飞行时间质谱法同时测定食品接触用塑料中50种添加剂的迁移量

为评估食品接触用塑料中添加剂的迁移风险,采用超高效液相色谱－四极杆飞行时间质谱（UPLC－QTOF MS）建立了同时测定食品接触用塑料中50种添加剂迁移量的方法。以甲醇和0.01%（体积分数）甲酸－5 mmol/L乙酸铵溶液为流动相进行洗脱,采用目标离子采集（Target MS/MS）模式对目标物的一级离子与二级离子进行监测。结果表明,各物质在0.02～5 mg/L质量浓度范围内线性关系良好,方法检出限为0.01～0.1 mg/kg,加标回收率为92.6%～104%,相对标准偏差（RSD）为0.60%～8.4%。在20款实际样品中有12个样品检出塑料添加剂,其中2个样品检出壬基酚,迁移量为0.033～0.071 mg/kg;6个样品检出抗氧化剂1076和抗氧化剂168,迁移量为0.12～3.3 mg/kg;4个样品检出光引发剂369、光引发剂ITX和光引发剂TPO,迁移量为0.054～4.0 mg/kg。该方法简单、灵敏、准确,适用于食品接触用塑料中50种添加剂迁移量的检测。     

Cell Membrane-camouflaged Multi-functional Dendritic Large Pore Mesoporous Silica Nanoparticles for Combined Photothermal Therapy and Radiotherapy of Cancer

Combining photothermal therapy and radiotherapy(PTT-RT) with reducing tumor hypoxia acts as an important antitumor modality. However, it is a great challenge to realize photothermal therapy, radiotherapy and exogenous oxygen supply in one nanosystem. To realize a combination of the three functions, we fabricated a red blood cell membrane(RBCm)-camouflaged, red blood cell content(RBCc) and the copper sulfide(CuS) co-loaded dendritic large pore mesoporous silica nanoparticle(DLMSN/CuS/RBCc/ RBCm). The cell membrane coating endowed the nanoparticles with good stability in the physiological environment, and CuS allowed the nanoparticle exhibiting good photothermal and radiosensitization properties. RBCc loaded nanoparticle DLMSN/CuS/RBCc enhanced superior anti-tumor effect than DLMSN/CuS during combined PTT-RT therapy because the introduction of RBCc increased the exogenous oxygen supply. The in vitro study further demonstrated that the combination of photothermal therapy and radiotherapy induced superior antitumor efficacy than single therapy. Our work thus presents a unique multifunctional nanoscale platform favorable for combined PTT and RT.     

吲哚化合物绿色高效的硫氰酸化反应

本文报道了在温和绿色的条件下,以过氧化氢（H₂O₂）作为氧化剂,进行吲哚化合物区域选择性硫氰酸化反应。结果表明：该反应体系中,无论是氮取代吲哚还是游离氨基吲哚均可获得较高的产率。产物2a～2o的结构经¹H NMR和¹³C NMR表征。该方法的主要特点是反应条件温和,反应时间短,产率高。     

Development of the Self-doping Porous Carbon and Its Application in Supercapacitor Electrode

The massive discharge of biomass wastes not only causes waste of resources, but also pollutes the environment. Therefore, converting biomass wastes into carbon materials is an effective way to solve the above problems. Here, using biomass waste pig nails as raw materials and K₂CO₃ as chemical activators, the N-doped porous carbon(KPNC) is prepared by direct pyrolysis. As an electrode for supercapacitors, the electrochemical tests of KPNCs showed that they exhibited good electrochemical performance and excellent cycling stability. When the current density is 0.2 A/g, the specific capacitance is up to 344.6 F/g. Moreover, it still maintains 97.6% initial capacitance retention after 2000 cycles at a high current density of 5 A/g. Above exceptional electrochemical performances may be ascribed to an appropriate porous structure(S_micro/S_total=80.31%, V_micro/V_total=76.19%), high nitrogen contents(4.44%, atomic fraction), oxygen contents(9.13%, atomic fraction) as well as small internal resistance. The above experimental results show that the conversion of pig nails to porous carbon can reduce the waste of resources and alleviate environmental pollution.     

Surface Organometallic Chemistry for Single-site Catalysis and Single-atom Catalysis

Although driven by different research interests, single-site catalysts and single-atom catalysts are both believed to be model systems bridging homogeneous and heterogeneous catalysis. The two concepts are similar but different. In this review, we will first explain the difference between single-atom catalysis and single-site catalysis, in terms of their goals, synthetic methods and coordination structures of corresponding catalysts. Then, we will introduce the surface organometallic chemistry method, a method traditionally used for synthesizing single-site catalyst. We will explain why it might benefit the single-atom catalysis community. At last, the choice of support to accommodate the method for synthesizing single-atom catalysts will be discussed.     

电感耦合等离子体原子发射光谱标准加入法测定铜精矿中锌、铅、砷、铜、铋、氧化镁

建立电感耦合等离子体原子发射光谱标准加入法测定铜精矿中Zn、Pb、As、Cu、Bi、MgO.分别对酸的加入种类和数量进行条件试验,采用盐酸–硝酸–盐酸–氢氟酸–高氯酸溶样,以标准加入法配制系列标准工作溶液,建立校正曲线,有效消除了样品基体对目标物检测结果的影响.目标物的分析谱线分别为Zn 206.2 nm,Pb 182.2 nm,As 197.2 nm,Cu 324.7 nm,Bi 190.2 nm,MgO 279.5 nm.各目标物校正曲线线性相关系数均不小于0.999,检出限为0.0002％～0.0006％,测定结果的相对标准偏差为0.62％～8.92％(n=6).按照该方法测定ZBK337、ZBK340铜精矿标准物质中Zn、Pb、As、Cu、Bi、MgO,测定值均在规定的标准值再现性限范围内.     

端粒酶活性检测研究进展

端粒酶活性检测方法经过近30年的不断改革与发展,取得了巨大突破。该文重点综述了近3年的端粒酶活性检测方法,其中包括化学反应发光法、电化学法、荧光分析法、比色法等,旨在更加全面地了解目前端粒酶活性检测的研究进展,为设计新的端粒酶活性检测方法和克服端粒酶活性检测方法在临床试验中的挑战提供思路。     

具有刺激响应型铜(Ι)配位聚合物的合成、结构及其荧光性质研究

以三(4-(吡啶-4-基)苯基)胺和Cu₄I₄(PPh₃)₄为原料,在水热条件下合成了一个新的Cu(Ι)配合物[Cu₂I₂(TPPA)₂]_n·4H₂O[1, TPPA=三(4-(吡啶-4-基)苯基)胺],其结构经IR、元素分析、X-射线单晶衍射表征。1属正交晶系,'P b c n'空间群,晶胞参数a=29.257(5) Å, b=12.621(2)Å, c=18.304(4) Å, α=90°, β=90°, γ=90°。固态荧光测试结果显示,在365 nm激发态下,配合物1在低温时具有多重发射峰,在CIE坐标下对其颜色做了一定的探究,可作为优良发光材料应用于LED上调节白光。