固相微萃取与色谱联用方法分析水中12种有机氯化合物

运用顶空固相微萃取与色谱闻用方法（ＨＳ－ＳＰＭＥ－ＧＣ）对水中的残留有机氯化合物进行了分析。对影响ＨＳ－ＳＰＭＥ－ＧＣ分析灵敏度的各种实验因素如涂层种类,萃取温度、平衡时间,离子浓度等进行了讨论并将该方法与固相萃取法（ＳＰＥ）,液液萃取法（ＬＬＥ）作了对比,同时考察了常见环境共存污染物直链烷基苯磺酸钠（ＬＡＳ）对几种方法的影响。     

固相微萃取-气相色谱法分析水中痕量1-萘酚

利用固相微萃取（ＳＰＭＥ）－气相色谱法（ＧＣ）分析了水中前量的１－萘酚。对于ＳＰＭＥ萃取头,溶液介质条件、吸附和解吸时间进行了研究。结果表明,ＰＡ＿８５萃取头对于水中１－萘酚的富集效果最佳。而无机盐氯化钠的加入和降低ＰＨ值可以明显地改善萃取效果。在优化后的条件下,ＳＰＭＥ－ＧＣ方法对于水中１－萘酚的检测限可达０．５μｇ／Ｌ,分析过程中标准偏差均小于４％。     

固相微萃取-气相色谱联用技术分析饮用水中的氯仿

利用顶空固相微萃取与气相色谱联用技术（ＨＳ－ＳＰＭＥ－ＧＣ）对饮用水中的氯仿进行了分析,并探讨了ＳＰＭＥ萃取头、吸附和热解吸时间对测定结果的影响;聚丙烯酸酯（ＰＡ）萃取头对水中的氯仿有较佳的富集效果,方法具有较好的重现性（ＲＳＤ为５．２３％,ｎ＝８）,线性范围为５～１００μｇ／Ｌ,检出限为３．４５μｇ／Ｌ。     

新型固相微萃取探头测定工业废水中的甲苯和二甲苯

采用溶胶－凝胶方法研制的聚甲基苯基乙烯基硅氧烷／羟基硅油复合涂层的固相微萃取探头及顶空固相微萃取－气相色谱联用技术（HS－SPME－GC），测定了制漆厂排放的工业废水中的甲苯和二甲苯。研究了影响该方法分析灵敏度的各种条件因素：萃取时间和温度，解吸时间和温度及离子强度等。结果表明新探头性能优于商用聚二甲基硅氧烷探头。方法的检出限为0．01μg/L－0．1μg/L，相对标准偏差小于6％；除苯以外线性范围达3个数量级。     

聚甲基苯基乙烯基硅氧烷固相微萃取探头的特性

用溶胶－凝胶及自由基引发交联方法，成功地制备了聚甲基苯基乙烯基聚硅氧烷和羟基硅油复合涂层的固相微萃取探头，与进口商用探头比较，研制的探头对芳香化合物具有高的萃取能力和热稳定性（350℃）以及长的使用寿命。     

苯-丙-硅共聚物固相微萃取涂层制备及性能研究

合成了苯乙烯-丙烯酸丁酯-乙烯基三乙氧基硅氧烷三元共聚物,并对其结构进行了表征,对其热稳定性、粘度、与纤维的结合能力等物理性能进行了测试。使用自制固相微萃取装置,研究了该聚合物作为固相微萃取涂层的应用性能,对水中小分子烷基苯、氯苯、硝基苯进行了萃取实验,将萃取结果与商品涂层萃取结果进行了比较,令人满意。实验数据表明,苯-丙-硅三元共聚物作为固相微萃取涂层性能优良。     

固相微萃取新型涂层的制备和特性(英文)

 以聚甲基苯基乙烯基硅氧烷为主要成分 ,采用溶胶 凝胶技术和自由基引发交联反应的方法首次制备了一种固相微萃取新涂层 ,并与气相联用 ,分析了芳香族化合物 ,考察了它的萃取性能。结果表明 :该涂层提供了大的比表面积 ,可获得高的萃取效率。与相应的商用固相微萃取涂层相比 ,该涂层具有更好的灵敏度和选择性 ,且热稳定性好 ,使用寿命长。     

YNTHESIS OF OLIGONUCLEOTIDE d-(CCGTACGG) via HELP METHOD

ＳＹＮＴＨＥＳＩＳＯＦＯＬＩＧＯＮＵＣＬＥＯＴＩＤＥｄ－（ＣＣＧＴＡＣＧＧ）ｖｉａＨＥＬＰＭＥＴＨＯＤ￥ＧｅｎＢｉｎＳＨＩ，ＫａｉＸｉａｎＣＨＥＮ，ＺｕＳｈｅｎｇＸＵ，ＺａｉＷａｎＹＡＮＧａｎｄＲｕＹｕｎＪＩ（ＳｈａｎｇｈａｉＩｎｓｔｉｔｕｔｅｏｆＭ...     

使用C18固要萃取膜—色质联用定量分析饮用水中痕量多环芳烃的初步 …

参照美国ＥＰＡ５２５．１方法,Ｃ１８－固相萃取膜萃取饮用水中的有机物,利用ＧＣ／ＭＳ法鉴定多环芳烃（ＰＡＨＳ）,使用１６种多环芳烃混合标准样绘制标准曲线,以内标法对ＰＡＨＳ进行定量分析。采用本方法某水厂经过深度处理后的出厂水中的７种多环芳烃的含量,ＰＡＨＳ的平均回收率为９４．０－９７．７％。检测限为０．００１μｇ／Ｌ。     

固相微萃取法在禁用偶氮染料检测中的应用初探

将固相微萃取技术应用于出口染色纺织品及皮革制品中禁用偶氮染料检验,偶染料经连二亚硫酸钠还原成芳胺后,用固相微萃取技术萃取富集后,用ＧＣ－ＭＳ分析。实验了萃取方式、萃取纤维、pＨ值、浓度、温度、萃取时间及色谱条件等因素对萃取与测定的影响。     

Fast and sensitive method to determine chloroanisoles in cork using an internally cooled solid-phase microextraction fiber

A new generation of solid-phase microextraction (SPME) fiber, an internally cooled fiber (cold fiber with polydimethylsiloxane loading) that allows heating the sample matrix and simultaneously cooling the fiber coating, was used to determine 2,4-dichloroanisole, 2,6-dichloroanisole, 2,4,6-trichloroanisole and pentachloroanisole in cork. A comparison between the cold fiber and regular SPME fiber was performed. An automated headspace solid-phase microextraction (HS-SPME) using commercial fibers and an internally cooled SPME fiber (CF-HS-SPME) coupled to gas chromatography-time-of-flight mass spectrometry (GC-TOF-MS) was used. The extraction conditions for both CF-HS-SPME and HS-SPME were optimized using full factorial design and Doehlert matrix. The best extraction conditions for CF-HS-SPME were obtained using 10 min of incubation time, 10 min of extraction time, and sample and fiber temperature of 130 and 10 degrees C, respectively. For HS-SPME, polydimethylsiloxane/divinylbenzene (PDMS/DVB) fiber was used with 10 min of incubation time, 75 min of extraction time, 85 degrees C of sample temperature, 8 ml of water was added and agitated at 500 rpm. The quantification limits for the target compounds using CF-HS-SPME procedure were between 0.8 and 1.6 ng g(-1) of cork, while for HS-SPME were between 4 and 6 ng g(-1) of cork. Furthermore, the CF-HS-SPME procedure could be used as a non-destructive method after minor modification of the agitator for the autosampler.     

葫芦脲用作固相微萃取涂层新材料

本文对葫芦脲(CB)作为一种新型固相微萃取(SPME)涂层材料进行了研究并用于中药白豆蔻的气相色谱分析测定.本文采用的CB SPME涂层制备方法简便、快速,并具有良好的热稳定性和重复性.CB[6]SPME萃取得到的主要成分与水蒸气蒸馏（SD）法基本一致,并且CB[6]SPME对色谱后流出的目标成分的相对峰面积比明显高于SD法和商品SPME萃取材料PDMS/CAR和PDMS/DVB,这可能是由于葫芦脲的特殊分子结构及其与组分分子间选择性作用所致.葫芦脲作为一种新型SPME涂层材料具有很大的研究潜力和应用前景.     

Column silylation method for determining endocrine disruptors from environmental water samples by solid phase micro-extraction

In solid phase micro-extraction (SPME), the analyte is partitioned between the coating and the sample and then desorption of the concentrated analyte is followed by GC-MS, where the analytes are thermally desorbed and subsequently separated on the column and quantified by the detector. The SPME method preserves all the advantages, such as simplicity, low cost, on site sampling and does not require solvents. Poly(acrylate) coating fibers have been developed for the extraction of phenols (such as 4-tert-butylphenol, 2,4-dichlorophenol, 4-n-pentylphenol, 4-n-hexylphenol, 4-tert-octylphenol, 4-n-heptylphenol, 4-n-nonylphenol, 4-n-octylphenol, pentachlorophenol and bisphenol A) in different water samples. The precision of the HS-SPME method ranges from 3–12% RSDs, depending on the compounds analyzed. More accurate results were obtained by HS-SPME with acidification and salting out, where the fiber is located above the liquid sample. The extraction period was 60 min, followed by desorption for 5 min at 300°C. After the analytes were completely desorbed, 1 μl of bis(trimethylsilyl)trifluoroacetamide (BSTFA) was injected by ordinary GC-MS injection. The trimethylsilylate peaks were improved significantly compared with free phenol peaks. The addition of salt (saturated sodium chloride) and acidification by hydrochloric acid (pH 2.0) were found to be very important for enhancing the partitioning of the polar phenols into the polymer coating and preventing ionization of the analytes. The method is capable of limits of detection of subparts per billion of the total phenols extracted from environmental water samples.     

Magnetron sputtering Si interlayer: a protocol to prepare solid phase microextraction coatings on metal-based fiber

Use of metal fibers in solid phase microextraction (SPME) can overcome the fragility drawback of conventional fused-silica ones. However, the surface modification of metal substrates is rather difficult, which largely prevents many mature traditional techniques, such as sol-gel and chemical bonding, being used in fabrication of SPME coating on metal-based fibers. This study demonstrates a protocol to resolve this problem by magnetron sputtering a firm Si interlayer on stainless steel fiber. The Si interlayer was easily modified active group, and attached with a multiwalled carbon nanotubes (MWCNTs) coating using the reported approach. The as-prepared MWCNTs/Si/stainless steel wire fiber not only preserved the excellent SPME behaviors of MWCNTs coatings, but also exhibited a number of advantages including high rigidity, long service life, and good stability at high temperature, in acid and alkali solutions. This new surface modification technique might provide a versatile approach to prepare sorbent coatings on unconfined substrates using traditional methods.     

Solid Phase Microextraction Fibers Coated with Sol-gel Aminopropylsilica/polydimethylsiloxane: Development and Its Application to Screening of Beer Headspace

The preparation and applicability of solid phase microextraction (SPME) fibers coated with a sol-gel organically modified silica based on 3-aminopropyltrimethoxysilane and polydimethylsiloxane (APTMS/PDMS) are described here. Micrographs of the coated fibers revealed a rugous surface; the thickness of the coating was estimated to be less than 30 microm. The APTMS/PDMS fibers were tested with synthetic samples and compared to commercial fibers for headspace SPME analysis of beer. Extraction and desorption using the APTMS/PDMS fibers were faster, which is typical for sol-gel SPME fibers. For polar and semi-polar compounds on beer headspace, the extraction efficiencies of the APTMS/PDMS fiber were superior to those of conventional fibers. The APTMS/PDMS fiber was found to be capable of extracting a broad range of analytes, including highly polar acidic species such as organic acids.     

Nano-structured lead dioxide as a novel stationary phase for solid-phase microextraction

The first study on the high efficiency of nano-structured lead dioxide as a new fiber for solid-phase microextraction (SPME) purposes has been reported. The size of the PbO2 particles was in the range of 34-136 nm. Lead dioxide-based fibers were prepared via electrochemical deposition on a platinum wire. The extraction properties of the fiber to benzene, toluene, ethylbenzene, and xylenes (BTEX) were examined using headspace solid-phase microextraction (HS-SPME) mode coupled to gas chromatography-flame ionization detection (GC-FID). The results obtained proved the suitability of proposed fibers for the sampling of organic compounds from water. The extraction procedure was optimized by selecting the appropriate extraction parameters, including preparation conditions of coating, salt concentration, time and temperature of adsorption and desorption and stirring rate. The calibration graphs were linear in a concentration range of 0.1-100 microg l(-1) (R2 > 0.994) with detection limits below 0.012 microg l(-1) level. Single fiber repeatability and fiber-to-fiber reproducibility were less than 10.0 and 12.5%, respectively. The PbO2 coating was proved to be very stable at relatively high temperatures (up to 300 degrees C) with a high extraction capacity and long lifespan (more than 50 times). Higher chemical resistance and lower cost are among the advantages of PbO2 fibers over commercially available SPME fibers. Good recoveries (81-108%) were obtained when environmental samples were analyzed.     

Preparation and characterization of novel crown ether functionalized ionic liquid-based solid-phase microextraction coatings by sol-gel technology

A novel crown ether functionalized ionic liquid (IL), 1-allyl-3-(6'-oxo-benzo-15-crown-5 hexyl) imidazolium hexafluorophosphate was synthesized and used as selective stationary phase to prepare task-specific IL-based solid phase microextraction (SPME) fibers by sol-gel method and free radical cross-linking technology. The underlying mechanism of the sol-gel reaction was proposed and the successful chemical bonding of the crown ether functionalized IL to the formed hybrid organic-inorganic copolymer coating was confirmed by FT-IR spectroscopy. The performance of this in situ created crown ether functionalized IL-based SPME fibers, was investigated in detail. The coating has porous surface structure, stable performance in high temperature (to 340 °C) and in different solutions (water, organic solvent, acid and alkali), and good coating preparation reproducibility. In contrast to the sol-gel derived 1-allyl-3-methyl imidazolium hexafluorophosphate-based coating prepared in our previous work with the identical procedure, the extraction performance of this newly developed sol-gel crown ether functionalized IL-based coating was superior for alcohols, phthalate esters, phenolic environmental estrogens, fatty acids and aromatic amines due to the introduction of benzo-15-crown-5 functional group in IL structure. Moreover, it was shown to provide higher or comparable extraction efficiencies for most analytes studied than did the commercial PDMS, PDMS/DVB and PA fibers.     

用于固相微萃取的乙烯基开链冠醚复合涂层的研制

固相微萃取 (SPME)是一种新型的样品预处理技术 [1] ,其核心是 SPME装置中萃取头上的固相涂层 .目前商用 SPME涂层的种类较少 ,热稳定性较差 (推荐使用温度 2 0 0～ 2 80℃ ) ,使用寿命较短(40～ 1 0 0次 ) ,价格偏高 ,限制了其推广应用 .因此发展高选择性、高稳定性和高效的固     

溶胶-凝胶固相微萃取涂层及其在农药残留分析中的应用

利用溶胶-凝胶(sol-gel)技术制备固相微萃取(SPME)涂层材料.通过硅醇盐前驱体与涂层聚合物羟基硅油(OH-TSO)的水解共聚的方法,成功地制备了聚二甲基硅氧烷sol-gel 涂层的SPME 萃取头,并以农药的混合标准水溶液为研究对象,用直接-固相微萃取-气相色谱法(GC)对涂层的性能进行考察,制成的萃取头适用于多种农药残留的萃取分离分析.     

Cobalt oxide nanoparticles as a novel high-efficiency fiber coating for solid phase microextraction of benzene,toluene, ethylbenzene and xylene from aqueous solutions

In this work cobalt oxide nanoparticles were introduced for preparation of a novel solid phase microextraction (SPME) fiber coating. Chemical bath deposition (CBD) technique was used in order for synthesis and immobilization of the Co₃O₄ nanomaterials on a Pt wire for fabrication of SPME fiber. The prepared cobalt oxide coating was characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis. The fiber was evaluated for the extraction of benzene, toluene, ethylbenzene and xylene (BTEX) in combination with GC–MS. A simplex optimization method was used to optimize the factors affecting the extraction efficiency. Under optimized conditions, the proposed fiber showed extraction efficiencies comparable to those of a commercial polydimethylsiloxane (PDMS) fiber toward the BTEX compounds. The repeatability of the fiber and its reproducibility, expressed as relative standard deviation (RSD), were lower than about 11%. No significant change was observed in the extraction efficiency of the new SPME fiber after over 50 extractions. The fiber was successfully applied to the determination of BTEX compounds in real samples. The proposed nanostructure cobalt oxide fiber is a promising alternative to the commercial fibers as it is robust, inexpensive and easily prepared.