色谱峰纯度的定性方法

较系统地介绍了近年来国内外文献中有关色谱峰纯度的定性方法──仪器方法和化学计量学方法。仪器方法重点介绍了归一化比较光谱、吸收比法、光谱抑制法及导数技术。化学计量方法介绍了主成分分析法和渐近因子分析法。通过对文献方法和应用的简单介绍,比较了各种方法的特点及优缺点,总结了规律。     

自由基检测技术进展

重点对主要的几种自由基检测技术的发展情况进行了讨论,并评价了各种方法的优缺点。涉及的自由基检测技术主要有分光光度吸收法与荧光方法、高效液相色谱法、化学发光法、电化学方法、自旋捕集技术和毛细管电泳方法,按间接检测方法和直接检测方法分类进行了评价。     

烟草制品及烟气中重金属检测方法的研究进展

从烟草制品及其烟气的前处理方法和检测方法两方面对烟草中重金属含量测定的研究进展进行了综述。重点介绍了湿法消解、微波消解、萃取和悬浮进样技术等样品前处理方法,以及原子光谱法、质谱法和液相色谱法等测定方法。列举了不同方法的灵敏度、准确性和适用范围,对各方法的优缺点进行了比较,并对烟草中重金属检测方法的发展进行了展望。     

基于碳点的即时测试方法的研究进展

即时测试(PoCT)方法的应用满足了食品、检疫、临床等多方面的快速、准确、简便的检测需求。碳点(CDs)作为一种新型的纳米材料,因易于制备、粒子尺度小、生物相容性好、低毒而被广泛应用于各种PoCT方法中。基于此,介绍了CDs的制备方法和表征方法,从食品安全、检疫与临床检测方面综述了CDs在PoCT中的应用,并对基于CDs的PoCT方法的发展进行了展望(引用文献95篇)。     

甲醛测定方法的研究进展

综述了甲醛测定方法(包括光谱法、电化学法、色谱法、生物学方法、化学方法和其他方法)的研究进展,并对其发展前景进行了展望(引用文献55篇)。     

以培养问题解决能力为核心的PMPR实验教学方法

基于"发现、分析、解决问题"的思维模式,本文提出了以培养学生问题解决能力为核心的"问题→方法→过程→结果"(PMPR)实验教学方法。该方法以"问题"为出发点,引导学生进行问题分析,寻找解决问题的方法,实施解决问题的过程,最终得到解决问题的结果。PMPR实验教学方法的实施激发了学生的学习兴趣,拓宽了学生的知识面,实现了对学生发现、分析、解决问题能力的培养。     

黄曲霉毒素检测方法研究

介绍了目前国内外对黄曲霉毒素的一些检测方法,包括薄层色谱法、高效液相色谱法、溴化荧光分光光度法、免疫分析法、微柱法,并对这些方法的优缺点进行了比较。对黄曲霉毒素的测定提出了一种较快速、简单的方法。     

高效液相色谱法测定食物中的类胡萝卜素

综述了用于食物中的类胡萝卜素、类胡萝卜素酯测定的高效液相色谱方法,介绍了样品提取处理方法、色谱分离条件及检测方法。引用文献85篇。     

原子光谱分析中的浆液雾化进样

提出了ICP-AES／MS方法中浆液雾化进样问题。叙述了均匀与稳定的浆样制备方法,包括使用添加剂和pH调节。讨论了颗粒大小分布、zeta电位测定等浆样稳定性的表征方法。评述了校准曲线法、标准加入法和本征内标法等校准方法。     

大气颗粒物中有机物色谱分析的样品制备技术

大气颗粒物中有机物成分分析对深入研究大气颗粒物对人类健康、环境、气候、生态的影响,解析气溶胶来源,制定颗粒物控制相关法规,以及风险管理方法具有重要意义。由于颗粒物中的有机组分种类繁多,分析复杂,目前仅10%~20%的有机物得到了定性和定量分析。因此,大气细颗粒中有机物的分析已成为环境分析领域的优先发展方向。色谱是大气颗粒物中有机物分析的主要方法,而样品制备则是影响分析速度和精度的关键步骤。本文对颗粒物中有机组分色谱分析前的样品制备方法进行了综述,介绍了索氏提取、超声辅助提取、微波辅助提取、加压溶剂提取等溶剂提取方法以及热解吸提取方法,并重点介绍了这些方法在大气颗粒物样品处理中的应用,总结了各种方法的优缺点。     

催化发光法同时测定空气中的甲醛、苯和二氧化硫

基于甲醛、苯和二氧化硫在纳米Ti3CeY2O11上的催化发光有交叉敏感现象,在3个波长处分别确定甲醛、苯和二氧化硫浓度与催化发光信号强度的响应关系,再依据发光信号强度的叠加性特征即可获取甲醛、苯和二氧化硫的准确浓度,据此建立了同时测定空气中甲醛、苯和二氧化硫的新方法.3个分析波长分别为420、535和680 nm,敏感材料表面温度为280℃,载气流速为130 mL/min.本方法对甲醛、苯和二氧化硫的检出限(3σ)分别为0.04、0.05和0.10 mg/m3,线性范围分别为0.08~75.60 mg/m3、0.10~101.40 mg/m3和0.30~115.00 mg/m3, 回收率分别为96.4%~103.7%、97.8%~102.5%和97.2%~103.3%.常见共存物,如乙醛、甲苯、硫化氢、氨、甲醇、乙醇和二氧化碳等不干扰测定.连续200 h通浓度均为50 mg/m3的甲醛、苯和二氧化硫混合气体,发光强度的相对偏差≤2%,表明此纳米级复合氧化物对甲醛、苯和二氧化硫的敏感性的寿命长.本方法充分利用了交叉敏感现象,可以实现空气中甲醛、苯和二氧化硫的在线分析.     

Analysis of low molecular weight aldehydes in air samples by capillary electrophoresis after derivatization with 4-hydrazinobenzoic acid

This work reports the analysis of selected aldehydes in air samples using capillary electrophoresis (CE). The method is based on the reaction of aldehydes with 4-hydrazinobenzoic acid (HBA) to give the corresponding hydrazones with maximum absorbance at 290 nm. Under optimized CE conditions, the HBA derivatives of four carbonyls (formaldehyde, acetaldehyde, propionaldehyde, and acrolein) were completely separated from one another, in less than 6 min, using a pH 9.3 tetraborate buffer at 0.040 mol L(-1) concentration as background electrolyte. A few method validation parameters were determined revealing good migration time repeatability (< 1.5% CV) and area repeatability (< 2% CV), excellent linearity (50-300 microg/L, r > 0.996) and adequate sensitivity for environmental applications. The limits of detection with respect to each single aldehyde were in the range of 2.7-8.8 ng L(-1). The methodology was applied to the determination of aldehydes indoors. Samples were collected in HBA impregnated octadecylsilica cartridges, at different times during the day. The most abundant carbonyls in the samples were acetaldehyde followed by formaldehyde, with estimated peak concentrations of 4.3 and 2.9 ppbv, respectively.     

Fluorimetric flow-injection analysis of total amounts of aldehydes in auto exhaust gas and thermal degradation emission gas with cyclohexane-1,3-dione

A simple flow-injection (FI) spectrofluorimetric method for the assay of total volatile aldehydes in auto exhaust gas and emission gas from thermal degradation was developed. Aldehydes, such as formaldehyde, acetaldehyde, propionaldehyde and n-butyraldehyde, reacted with cyclohexane-1,3-dione (CHD) to form more strongly fluorescent compounds. A two-channel flow system was assembled. Distilled water and 0.02% CHD were delivered at 0.75 ml min(-1). The optimum conditions were pH 5 (2.2 M CH(3)COONH(4)-CH(3)COOH buffer solution), reaction temperature 70 degrees C, reaction coil length 0.5 mm i.d. x 7 m, cooling coil length 2 m, sample size 60 microl, excitation and emission wavelengths, 376 nm and 452 nm. Aldehydes in sample gas (10 1) were collected by passing the gas at a flow rate of 0.5 1 min(-1) through two impingers connected in series. 10 ml of methanol was used as an absorbent and diluted sample solution was injected into the carrier stream. The calibration graph was linear in the range 100-1000 ppb. The detection limit was 30 ppb and a sampling frequency of 30 h(-1) was attained. Relative standard deviation for 10 standard formaldehyde solutions (500 ppb) was 1.5%. This rapid and simple FI method was applied to the determination of the total amount of aldehydes, calculated as formaldehyde, in auto exhaust gas and emission gas from the thermal degradation of polymers. The method is useful for monitoring aldehyde emissions and investigating the removal effect of aldehydes from various sources.     

卷烟主流烟气中8种羰基化合物的超高效液相色谱测定

建立了超高效液相色谱(UPLC）对卷烟主流烟气总粒相物中甲醛、乙醛、丙酮、巴豆醛等8种羰基化合物的测定方法。采用经2,4-二硝基苯肼酸性溶液处理过的剑桥滤片捕集烟气,再用含2%(体积分数）吡啶的乙腈溶液进行萃取,以KinetexTM C18(150 mm×2.1 mm,2.6 μm）为色谱柱,水-乙腈(35∶65）和水-乙腈-四氢呋喃-异丙醇(59∶30∶10∶1）为流动相梯度洗脱,采用二极管阵列检测器进行检测,分析时间为20 min。结果表明,该方法的相关系数r2≥0.999 97,检出限为25.81~67.74 ng/cig,平均加标回收率为95%~99%,相对标准偏差为1.4%~5.8%。各组分峰分离度高、分析时间短、流动相耗量少、结果准确可靠。用该方法对20种不同卷烟牌号样品中8种羰基化合物的含量进行测定,结果满意。     

Atmospheric chemistry of 3-pentanol: kinetics, mechanisms, and products of Cl atom and OH radical initiated oxidation in the presence and absence of NOX

Smog chamber/FTIR techniques were used to study the atmospheric chemistry of 3-pentanol and determine rate constants of k(Cl+3-pentanol) = (2.03 +/- 0.23) x 10 (-10) and k(OH+3-pentanol) = (1.32 +/- 0.15) x 10 (-11) cm (3) molecule (-1) s (-1) in 700 Torr of N 2/O 2 diluent at 296 +/- 2 K. The primary products of the Cl atom initiated oxidation of 3-pentanol in the absence of NO were (with molar yields) 3-pentanone (26 +/- 2%), propionaldehyde (12 +/- 2%), acetaldehyde (13 +/- 2%) and formaldehyde (2 +/- 1%). The primary products of the Cl atom initiated oxidation of 3-pentanol in the presence of NO were (with molar yields) 3-pentanone (51 +/- 4%), propionaldehyde (39 +/- 2%), acetaldehyde (44 +/- 4%) and formaldehyde (4 +/- 1%). The primary products of the OH radical initiated oxidation of 3-pentanol in the presence of NO were (with molar yields) 3-pentanone (58 +/- 3%), propionaldehyde (28 +/- 2%), and acetaldehyde (37 +/- 2%). In all cases the product yields were independent of oxygen concentration over the partial pressure range 10-700 Torr. The reactions of Cl atoms and OH radicals with 3-pentanol proceed 26 +/- 2 and 58 +/- 3%, respectively, via attack on the 3-position to give an alpha-hydroxyalkyl radical, which reacts with O 2 to give 3-pentanone. The results are discussed with respect to the literature data and atmospheric chemistry of 3-pentanol.     

柱前衍生高效液相色谱法同时测定水性涂料中6种醛类化合物

建立了柱前衍生高效液相色谱同时测定水性涂料中甲醛、乙醛、丙醛、苯甲醛、正戊醛和对甲基苯甲醛等6种醛类化合物的方法。样品经水超声提取后,与2,4-二硝基苯肼乙腈溶液在酸性条件下衍生,再经0.45 μm针式过滤器过滤后进样分析。系统考察了酸度调节剂、pH值、反应温度、时间等因素对衍生反应的影响,优化的反应条件为：以稀释后的盐酸溶液作为酸度调节剂,缓冲溶液pH=3,反应温度为60 ℃,反应时间为30 min。在此条件下,于0.08~2.0 mg/L浓度范围内,6种醛类化合物呈良好的线性关系;检出限为0.05~2.50 mg/kg;在2.0、4.0、6.0 mg/kg 3个水平下的加标回收率为87.0%~112.8%;RSD为1.12%~9.54%。结果表明,本方法具有较宽的线性范围,良好的精密度和准确度,适用于水性涂料中6种醛类化合物的同时测定。     

Determination of aliphatic aldehydes by liquid chromatography with pulsed amperometric detection

An electrochemical detection method for short-chain saturated and unsaturated aliphatic aldehydes separated by liquid chromatography in moderately acidic medium is described. A triple-step waveform of the potentials applied to the polycrystalline platinum electrode, is proposed for sensitive detection of aliphatic aldehydes in flowing streams avoiding tedious pre- or post-column derivatization and/or cleanup procedures. The influences of the perchloric acid concentration and dissolved oxygen in the mobile phase, on the amperometric and chromatographic performance were evaluated and considered in terms of sensitivity and selectivity. Under the optimised experimental conditions (i.e., deoxygenated 50mM HClO4) the proposed analytical method allowed detection limits between 0.2 microM for acrolein and 2.5 microM for valeraldehyde. Regression analysis of calibration data indicates that responses for all investigated compounds are linear over about 2 orders of magnitude above the LOD, with correlation coefficients >0.990. The method was successfully applied to the determination of formaldehyde, acetaldehyde, propionaldehyde and acrolein in real matrices such as spiked water and red wines with good mean recoveries (81-97%).     

Spectrophotometric flow injection analysis of formaldehyde in aqueous solutions using 3-methyl-2-benzthiazolinone hydrazone

Summary A flow injection method for the determination of formaldehyde was developed. It is based on its reaction with 3-methyl-2-benzthiazolinone hydrazone (MBTH) to yield a blue formazan anion. Typically 180 l samples are injected into a buffered carrier stream with a frequency of 30 per hour. This sample line merges with the reagent stream containing MBTH, whereupon an azine is formed. After merging with a second stream containing an acidic solution of FeCl₃ as reagent, MBTH is oxidized to an intermediate that attacks the azine yielding the formazan dye with an _max at 635 nm. The method was applied to formaldehyde concentrations in the range from 0.15 mg/l to 15 mg/l. The relative standard deviation was 2.3% for 3 mg/l formaldehyde, and 5.1% for 0.3 mg/l, respectively. Strong reducing agents like nitrite interfere seriously. Out of the family of carbonyl compounds only acetaldehyde and propionaldehyde cause strong positive interference.     

Determination Of Formaldehyde And Acetaldehyde Associated To Atmospheric Aerosols By HPLC

Abstract

A rapid new analytical protocol was developed for the determination of formaldehyde and acetaldehyde associated to atmospheric particulate matter, at ng/m³ levels. The aerosols were collected on glass fiber filters (8″×10″) at face velocities ranging from 15 m/min to 23 m/min. Aliquots of 15.4 cm² were sonicated, for 20 min, with 5.0 mL of 0,01% 2,4-dinitrophenylhydrazine (DNPH), 1 % phosphoric acid. The liquid phase was then filtered and the separation and quantification of the corresponding 2,4-dinitrophenylhidrazone (DNPHo) derivatives carried out by reverse phase HPLC. Acetonitrile:water (57:43, v/v) as mobile phase at 1.0 mL/min and absorbance detection at 350 nm and 365 nm for, respectively, formaldehyde-DNPHo (0.04 AUFS) and acetaldehyde-DNPHo (0.01 AUFS) were used. The precision for four different aliquots, from a 8″×10″ glass fiber filter, were under 0.04% for formaldehyde and 14.16 % for acetaldehyde. In Salvador, Bahia, Brazil, formaldehyde and acetaldehyde were determined, respectively, in the range of 6.8 ng/m³ to 27.3 ng/m³ and 9.1 ng/m³ to 54.6 ng/m³.     

Derivatizing assay for the determination of aldehydes using micellar electrokinetic chromatography

In this work, the use of a novel derivatization agent for the determination of aldehydes (in this particular case: formaldehyde, acetaldehyde, propionaldehyde, and valeraldehyde) using micellar electrokinetic chromatography is reported. The derivatization reaction is based on the reaction of aldehydes with benzhydrazide to form the corresponding derivates with maximum absorbance at 250 nm. The experimental conditions of the derivatization reaction as well of the separation were optimized. The adducts were separated with a +22 kV voltage at a temperature of 29°C. The adducts’ separation was performed in less than 14 min using as the running buffer a mixture containing 110 mmol/L of sodium dodecyl sulfate and 27 mmol/L of sodium tetraborate at pH 9.45. Samples were injected using hydrodynamic mode (50 mbar × 5 s). The calibration curves were linear up to 15.0 mg/L with r ² above 0.99. Intra and inter‐day precisions were in average 3 and 4%, respectively, and recoveries were in average of 95%. Limits of detection and quantification were around 0.5 and 1.5 mg/L, respectively. The developed method was successfully applied in the analysis of low molar weight aldehydes in yogurt and vinegar samples.