甲醇氧化PtSnCo/C阳极催化剂

通过乙二醇液相分步还原法制备了金属质量分数为20%的PtSn/C二元及PtSnCo/C三元催化剂.采用X射线衍射(XRD)光谱法、能量散射谱(EDS)对催化剂进行了表征;通过阳极线性伏安扫描法(LSV)、连续循环伏安法(CV)、预吸附单层CO溶出法研究了其电化学性质.结果表明,PtSnCo/C三元催化剂较商业化JM-PtRu/C催化剂具有更好的氧化甲醇催化活性.循环伏安扫描100圈后发现,PtSn/C二元催化剂的甲醇氧化峰电流快速衰减到其初始氧化峰电流的11%左右,而PtSnCo/C三元催化剂仅衰减到其初始值的50%左右,这表明PtSnCo/C三元催化剂具有更好的化学稳定性.在PtSnCo/C催化剂上,甲醇氧化起始电位比直接吸附CO后的CO阳极溶出电位负,意味着甲醇在PtSnCo/C催化剂上氧化的中间产物不是CO,而是比CO更为活泼且易于氧化的中间物种.     

石墨烯负载PtPd纳米催化剂的合成及其电催化氧化甲醇性能

采用改进的Hummers法制备氧化石墨烯,然后以其为载体前驱体,以三嵌段共聚物P123为还原剂、保护剂和形貌控制剂,分别采用液相共还原法和连续还原法,制备了三种石墨烯负载PtPd(PtPd/G)纳米催化剂;氧化石墨烯与金属前驱体同步还原,从而达到原位负载的效果。采用X射线衍射(XRD)、透射电镜(TEM)、X射线光电子能谱(XPS)等表征方法分析了PtPd/G纳米催化剂的形貌、结构和组成,结果表明:采用共还原法得到的两种催化剂均为纳米枝结构;采用连续还原法得到了空心纳米结构。电化学循环伏安法和计时电流法研究表明:空心结构PtPd/G纳米催化剂抗CO中毒能力最强,100°C下共还原合成的PtPd/G纳米枝催化剂具有最佳的电催化氧化甲醇性能,约是商业化Pt/C催化剂的1.5倍。     

制备方法对直接乙醇燃料电池阳极PtSn/C催化剂性能的影响

 对比研究了用三种液相沉积还原法制备的PtSn/C催化剂,并用X射线衍射、透射电镜和程序升温还原等技术表征了催化剂的形貌、结构及组成. 用乙二醇还原法制备的PtSn/C(EG)催化剂的平均粒径最小(约为1.8 nm), 且分布均匀, Sn以多种价态存在于PtSn/C(EG)中. 采用循环伏安法和直接乙醇燃料电池单池评价了三种PtSn/C催化剂对乙醇氧化反应的催化活性,探索了单池性能与催化剂粒径及组成的关系. 结果表明, PtSn/C(EG)催化剂具有较高的催化乙醇氧化活性. 这可能是因为PtSn/C(EG)催化剂的金属粒径较小, Pt晶格发生了适当的扩张以及SnO2能够在较低电位下提供含氧物种的缘故.     

碱处理对PtRu/WC电极材料结构及甲醇电催化氧化性能的影响

本文采用不同pH值的KOH溶液对WC材料进行了不同时间的碱处理,并以该WC为载体通过微波加热还原法制备PtRu/WC 复合材料. 采用XRD对材料进行结构表征,通过循环伏安法和计时电流法测试电极对甲醇的电催化氧化性能. 结果表明,经不同碱性条件处理的WC材料表面更易于铂钌的负载,其中经强碱（pH = 14）的KOH溶液处理后可在WC表面得到结晶度最好的铂钌合金,且所得电催化剂PtRu/WC电极的性能最佳,而经碱处理5 h的WC负载的PtRu/WC电极对甲醇氧化的效果最优.     

炭黑负载Pt-Sn双金属催化剂对乙醇的电催化氧化性能

采用一步还原法(乙二醇为还原剂)与两步还原法(在聚乙烯吡咯烷酮PVP保护下,先用硼氢化钠还原制备Sn溶胶,沉积Pt后用乙二醇还原)制备了炭黑负载Pt-Sn双金属催化剂,利用循环伏安法和计时电流法考察了催化剂制备方法、Pt/Sn原子比、溶液p H值、PVP/Sn质量比、反应介质等对乙醇室温电催化氧化活性和稳定性的影响.以X光衍射、透射电镜及电化学活性面积测定对所得催化剂进行了表征.发现引入Sn明显提高了Pt催化剂对乙醇的电催化活性与稳定性,两步还原法得到的Pt3Sn/C催化剂具有更小的颗粒尺寸,更大的电化学活性面积及更高的乙醇氧化活性与稳定性.与酸性介质相比,该催化剂在碱性介质中的电化学活性更好.     

不同温度烧制介孔碳作为直接甲醇燃料电池催化剂载体

以嵌段共聚物P123为模板制备介孔氧化硅SBA-15, 并以此SBA-15为模板, 以蔗糖为碳源在不同的温度下(600-900 °C)制备介孔碳CMK-3. 采用浸渍还原法, 以硼氢化钠为还原剂, 制备介孔碳载Pt电催化剂, 即20% (w) Pt/CMK-3. 利用循环伏安法(CV)、计时电流法等测试电催化剂对甲醇的催化氧化性能及稳定性. 预吸附单层CO溶出伏安法研究测试催化剂抗CO中毒能力. 结果表明在烧制温度为900 °C时制备的介孔碳载Pt催化剂具有最好的催化性能和稳定性, 而在烧制温度为700 °C时制备的介孔碳载Pt催化剂对CO有较低的溶出电位.     

中空介孔碳化钨微球载钯催化剂对甲酸电催化性能

采用喷雾干燥法和还原炭化处理制备具有中空介孔结构的碳化钨钴复合粉(HTCCS),其中,钴的质量含量为6%。在碳化钨钴复合粉表面的钴和氯化钯发生置换反应,得到纳米Pd/WC复合催化剂。采用X射线粉末衍射(XRD)、扫描电镜(SEM)和透射电镜(TEM)对样品的形貌和晶型结构进行了表征。结果表明, 5.0-6.0nm钯纳米粒子取代钴均匀分布在碳化钨微球表面。采用循环伏安和计时电流法研究了在酸性溶液中Pd/WC催化剂对甲酸的电催化氧化性能,结果表明,Pd/WC催化剂比Pd/C催化剂对甲酸呈现出更高的电催化氧化活性和稳定性。     

一步法制备还原态氧化石墨烯载铂纳米粒子及其对甲醇氧化的电催化性能

以天然石墨为原料,采用改进的Hummers法制备氧化石墨.然后采用简单的一步化学还原法在乙二醇(EG)中同时还原氧化石墨烯(GO)和H₂PtCl₆制备高分散的铂/还原态氧化石墨烯(Pt/RGO)催化剂.采用傅里叶变换红外(FTIR)光谱、X射线衍射(XRD)和透射电子显微镜(TEM)对催化剂的微结构、组成和形貌进行表征.结果表明, GO已被还原成RGO, Pt纳米粒子均匀分散在RGO表面,粒径约为2.3 nm.采用循环伏安法和计时电流法评价催化剂对甲醇氧化的电催化性能,测试结果表明, Pt/RGO催化剂对甲醇氧化的电催化活性和稳定性与Pt/C和Pt/CNT相比有了很大提高.另外其对甲醇电催化氧化的循环伏安图中正扫峰电流密度(I_f)和反扫峰电流密度(I_b)的比值高达1.3,分别是Pt/C和Pt/CNT催化剂的2.2和1.9倍,表明Pt/RGO催化剂具有高的抗甲醇氧化中间体CO_ad的中毒能力.     

中空介孔碳化钨微球载钯催化剂对甲酸电催化性能（英文）

采用喷雾干燥法和还原炭化处理制备具有中空介孔结构的碳化钨钴复合粉(HTCCS),其中,钴的质量含量为6%。在碳化钨钴复合粉表面的钴和氯化钯发生置换反应,得到纳米Pd/WC复合催化剂。采用X射线粉末衍射(XRD)、扫描电镜(SEM)和透射电镜(TEM)对样品的形貌和晶型结构进行了表征。结果表明,5.0-6.0 nm钯纳米粒子取代钴均匀分布在碳化钨微球表面。采用循环伏安和计时电流法研究了在酸性溶液中Pd/WC催化剂对甲酸的电催化氧化性能,结果表明,Pd/WC催化剂比Pd/C催化剂对甲酸呈现出更高的电催化氧化活性和稳定性。     

具有纳米结构的铂电极表面的电化学制备及其性能

采用控电位方波氧化还原法和控电流方波氧化还原法分别成功地制备了控电位粗糙铂(CPRPt)和控电流粗糙铂(CCRPt)纳米级铂电极表面.通过考察两类电极表面对甲醇电催化氧化的性能,发现CPRPt和CCRPt纳米级铂电极表面催化氧化甲醇峰值电流密度分别是光滑铂电极的约1.35倍和2.50倍.采用现场拉曼光谱技术考察了两电极表面的表面增强拉曼(SERS)效应,发现两电极表面对吡啶吸附均有较高SERS活性,CPRPt电极表面还对有机小分子的解离吸附的拉曼光谱具有特殊的增强效应.本文初步探讨了两电极表面的SERS机理.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.