碳五馏分中微量阻聚剂二乙基羟胺的气相色谱测定法

提出采用HP-l毛细管色谱柱测定碳五馏分中微量阻聚剂二乙基羟胺组分的气相色谱方法。在本文提出的条件下，二乙基羟胺与其他组分分离良好，检出限低于20mg／kg，相对标准偏差为3．86％，结果准确可靠，方法满足控制分析的要求。     

艾蒿柱层析馏分成分分析

将甲苯浸泡获得的艾蒿提取物置于硅土层析柱上,再用乙酸乙酯淋洗获得一个柱层析馏分。用气相色谱对该馏分进行分离,用质谱法和红外光谱法对分离组分进行了结构鉴定。共鉴定出20个纽分,其中倍半萜3个,单萜6个,在这9个萜类组分中,有3个是首次报道。同样,用液相色谱-质谱联用仪(LC—DAD-MSD)对该馏分进行了分析鉴定,结果显示这些组分中可能存在大量的萜类物质。     

低温煤焦油中酚含量的高效液相色谱快速测定

本提出了用反相高效液相色谱法测定低温裂解煤焦油中酚类化合物的新方法。用碱性溶剂从焦油馏分中提取的酚类化合物可直接进样进行反相高效液相色谱分析。操作条件是：色谱柱：Ｚｏｒｂａｘ ＯＤＳ，φ４．６ｍｍ×２５０ｍｍ；流动相：甲醇／水，用本法测定了低温焦油中五个馏分中苯酚，甲苯酚，二甲酚，三甲酚，萘酚等共八个组分的含量。碱性溶剂提取酚的回收率大于９８％。     

填充毛细管液相色谱-高温毛细管气相色谱在线联用分析重油

重油的组成分析一直是个难题,它的沸点高,族组分种类多,各族内组分的异构体又极为繁多.最好的分析方法是用高效液相色谱(HPLC)做族分离,馏分收集后再用CGC分析.但HPLC的族馏分体积比CGC进样量大100倍.本文采用填充毛细管液相色谱(μHPLC)与高温毛细管气相色谱(HTGC)在线联用技术[1]分析重油.正相μHPLC将样品按族分离,μHPLC的柱效高,族分离能力强,而小的馏分体积(<100μL)可避免GC分流进样.在一次LC进样后,多位储存型联用接口将分离后的各族组分切割、存储并分别无损失转入HTGC分析,利用FID对高于C10的有机物的响应值相…     

石油高沸馏分的顶替色谱研究

族组分的制备分离是石油高沸馏分分析中必不可少的先行步骤。本文提出采用常规分析色谱柱以顶替色谱模式取代经典柱色谱完成族组分制备分离,不仅提高了分离效率,缩短了分离时间,而且大大减少了溶剂浪费,降低了手工操作劳动强度。文献中已有将反相高效顶替色谱(HPDC)应用于简单亲水样品(特别是生化样品)组分化合物制备分离的报道,而正相HPDC用于分离复     

原油非烃化合物结构与含量的馏分分离及联用色谱信息获取通用方法

用正己烷将沥青质从油样中分离,再根据类组分之间极性差别,用中性氧化铝-硅胶双层析柱将原油样其余部分分成脂肪烃、芳香烃和7个非烃馏分。各馏分回收完全。用色-质联用技术,将非烃馏分再分离并获取实验数据,为原油非烃结构和含量测定奠定有关的信息基础。不同油井样品研究和重复实验表明,方法对各种原油非烃化合物分离和信息测定有很好的重现性。     

硝酸银高效液相色谱法快速测定柴油馏分的族组成

柴油馏分族组成的测定以往多用柱色谱法,不仅分析流程长,并需消耗大量的溶剂和吸附剂。另一缺点是反映柴油使用性能的重要组分——烯烃混在饱和烃中不能分离测定。本工作用高效液相色谱法,以涂渍20％AgNO_3的硅胶柱和μ—porasil柱组成双柱系统,正己烷为流动相,用示差折光和紫外吸收检测器,快速测定了柴油馏分的族组成。在AgNO_3硅胶柱上考察了不同的AgNO_3涂复量、活化温度及活化时间对分离柴油中烯烃的影响,选择了对柴油馏分进行族组成测定所适宜的色谱条件。用常规柱色谱法分离柴油所得的饱和烃、芳烃以及蜡裂解柴油烯烃(含烯烃80％左右),经AgNO_3硅胶柱制备分离收集而得的纯饱和烃和烯烃分别作为标样,在相同的液体色     

高温气相色谱和高温气相色谱-质谱法对费托合成蜡的分离和鉴定

费托合成蜡是费托合成反应中的重要产物之一。采用高温气相色谱与冷柱头进样相结合的方式,建立了一种分离分析费托合成蜡的气相色谱方法。该方法无需对费托合成蜡进行预处理,使用氦气为载气,选用更长的高温色谱柱,具有平稳的色谱基线,对费托合成蜡中正构烷烃和其他未知组分有很好的分离效果,能够洗脱费托合成蜡中碳数大于C₉₀的重组分。用高温气相色谱-质谱法对费托合成蜡馏分进行定性分析,其组分有烷烃、烯烃和含氧化合物。该方法对了解费托合成蜡组分的详细信息和费托合成工艺的开发有重要意义。     

全二维气相色谱法用于不同石油馏分的族组成分布研究

一直以来采用化学法、色谱法或质谱法等多种方法联用分析不同石油馏分中一 些目标化合物和芳烃含量，但这些方法操作繁琐，迫切需要改进。作者采用全二维 气相色谱方法（GC×GC）研究不同沸程范围的蒸馏汽油、煤油柴油和裂化柴油的烷 烃（P）、烯烃＋环烷烃（O＋N）和1－4环芳烃（A）的族分离新方法。经过对柱系 统进行选择和对色谱条件进行优化，一个GC×GC方法即可实现对不同石油馏分的族 组成分离和目标化合物分离。用标准物对油品中一些特征组分进行定性，并对特征 组分和不同沸程的石油馏分的P，（O＋N），A族组成进行定量和比较，定量结果的 相对标准偏差（RSD）≤2.3。一个GC×GC方法便可完成原来要几个美国测试和材料 协会（ASTM）方法才能完成的任务。     

汽油馏分的硫化物形态分布研究

采用气相色谱和硫化学发光检测(GC-SCD)技术,经过对色谱条件的优化,建立了汽油馏分中硫化物形态分布的测定方法。用标准物质的保留时间辅以化学法脱除硫醇、硫醚的方法对107个硫化物进行了定性;标准硫化物保留时间重复测定结果的相对标准偏差(RSD)≤0.25%。用内标法对主要的硫化物和总硫含量进行了定量,方法的加标回收率为96%~115%;同一样品重复测定5次,含硫大于7 mg/kg的硫化物组分重复测定结果的RSD≤8.9%。所建立的方法可用于不同装置的汽油馏分的硫化物形态分布规律的研究。     

孤岛油田含聚污水中酸性组分的分离与组成结构研究

采用石油醚和三氯甲烷分级萃取孤岛油田含聚污水中的油分,得到两个不同极性的组分F1和F2;用碱抽提法从酸值较高的F2组分中分离酸性物质并将其甲酯化,通过柱层析法将甲酯化物分成Ⅰ、Ⅱ和Ⅲ三个甲酯组分。用元素分析、红外光谱分析等对上述各组分的组成及结构进行鉴定,对甲酯组分Ⅰ进行GC MS 结构鉴定。结果表明,含聚污水中酸性乳化活性物质主要富集在F2组分中,降解HPAM是酸性物质的主要的组成部分;甲酯组分Ⅰ主要为石油酸甲酯,甲酯组分Ⅱ主要为含酰胺基的脂肪酸甲酯,甲酯组分Ⅲ除含有较多酰胺基脂肪酸甲酯外,还含有一定量的强极性含硫化合物;孤岛油田含聚污水中的轻质石油酸以单环环烷酸、四环环烷酸和脂肪酸为主,其中环烷酸的含量明显大于脂肪酸的含量。脂肪酸以C16和C18为主,单环环烷酸以C14~18为主,四环环烷酸以C18~21为主。     

Polysaccharides and sterols from green algae Caulerpa lentillifera and C. sertularioides

Sterols and polysaccharides of green alga Caulerpa lentillifera grown under laboratory conditions and in mariculture and polysaccharides of green alga C. sertularioides grown under natural conditions were studied. The sterol fraction consisted of C₂₇-C₂₉ steroidal alcohols with Δ⁵-unsaturation in the steroid core regardless of the growth conditions. The dominant (79.9%) steroid component of the sterol fraction was clionasterol. The water-soluble fraction of C. lentillifera grown under laboratory conditions was a mixture of 1,4-α- and 1,3-β-D-glucans and protein. The same fraction isolated from C. lentillifera grown in mariculture contained only protein. The water-soluble fraction of C. sertularioides grown under natural conditions contained 1,3;1,6-β-D-galactan sulfated at C2. The principal components of the base-soluble polysaccharide fractions from all algae samples were 1,4-α-D-glucans. Translated from Khimiya Prirodnykh Soedinenii, No. 1, pp. 5-8, January-February, 2009.     

气相色谱法测定甲乙酮重质物含量

用HP-5毛细管色谱柱测定甲乙酮生产过程中产生的重质副产物组分的含量,研究了其测定条件,并对分离后的组分用质谱方法进行定性,按照确定的分析条件,各组分都得到较好的分离,回收率在98％～102％之间,分析结果比较准确可靠．     

树兰花挥发性成分的提取及鉴定

采用超临界CO2流体从树兰花中提取挥发油,得油率为2.64%。利用气相色谱-质谱联用仪(GC-MS)对树兰花油中的化学成分进行分离和鉴定,共分离出54种组分,确认了其中的48种成分,其中有18种萜烯类化合物和12种酯类物质等成分,如α-蛇麻烯、亚麻酸乙酯、大根香叶烯-D、β-榄香烯、古巴烯、石竹烯、茉莉酮酸甲酯、β-蛇麻烯-7-醇和棕榈酸乙酯等。     

用气相色谱-质谱和气相色谱-红外联用技术分析热裂解汽油C9馏分中的组成

采用气相色谱-质谱和气相色谱-红外联用技术对热裂解汽油C9馏分中的组分进行分离和定性分析。实验使用了50m聚甲基硅氧烷毛细管色谱柱,EI电离源,电离能70eV和10eV,红外光谱仪的检测器为MCT。通过分析确定了热裂解汽油C9馏分中52个化合物的结构。降低质谱的电离能有利于确定组分的分子量。质谱可以提供被测组分的裂解碎片离子和分子量的信息,红外在确定官能团和同分异构体时要优于质谱。两种联用技术的使用较好地解决了单一方法测定复杂混合物中组分结构所存在的缺陷。     

Separation of sanguinarine and chelerythrine in Macleaya cordata (Willd) R. Br. based on methyl acrylate-co-divinylbenzene macroporous adsorbents

Sanguinarine (SAN) and chelerythrine (CHE) are known as major effective components in the quaternary benzo[c]phenanthridine isoquinoline alkaloids (QBA) fraction of Macleaya cordata (Willd) R. Br. but possess different biological activities. In this study, a method for the separation of SAN and CHE based on methyl acrylate-co-divinylbenzene (MA-co-DVB) macroporous adsorbents was established. The relationship between the polarities of the adsorbents and their adsorption-desorption behaviors towards SAN and CHE was investigated. The results showed that, among three selected commercial adsorbents and seven synthesized macroporous polymeric adsorbents with different MA content, the adsorbent No. 5 with 50% MA content provided the best separation power, and the two alkaloids were separated successfully in a gradient eluent process with 60% (v/v) ethanol aqueous and 80% ethanol aqueous contained 8% acetic acid. Dynamic adsorption and desorption tests had been performed in the column packed with the adsorbent No. 5 for optimizing the process parameters. Under the optimized conditions, the ratio of SAN and CHE transformed from 2:1 in the QBA fraction of M. cordata to 1:13 and 25:1 in the products obtained from the two-step gradient elution, and the recoveries of both SAN and CHE were nearly 90%.     

Sweet Sorghum as Feedstock for Ethanol Production: Enzymatic Hydrolysis of Steam-Pretreated Bagasse

Sweet sorghum is an attractive feedstock for ethanol production. The juice extracted from the fresh stem is composed of sucrose, glucose, and fructose and can therefore be readily fermented to alcohol. The solid fraction left behind, the so-called bagasse, is a lignocellulosic residue which can also be processed to ethanol. The objective of our work was to test sweet sorghum, the whole crop, as a potential raw material of ethanol production, i.e., both the extracted sugar juice and the residual bagasse were tested. The juice was investigated at different harvesting dates for sugar content. Fermentability of juices extracted from the stem with and without leaves was compared. Sweet sorghum bagasse was steam-pretreated using various pretreatment conditions (temperatures and residence times). Efficiency of pretreatments was characterized by the degree of cellulose hydrolysis of the whole pretreated slurry and the separated fiber fraction. Two settings of the studied conditions (190 °C, 10 min and 200 °C, 5 min) were found to be efficient to reach conversion of 85–90%.     

Enantioselective analysis of primaquine and its impurity quinocide by capillary electrophoresis

A capillary electrophoretic (CE) method for the baseline separation of the enantiomers of primaquine diphosphate (PQ) and quinocide (QC) (a major contaminant) in pharmaceutical formulations is proposed. Both components were separated under the following conditions: 50 mm tris phosphate buffer (pH 3.0) containing 15 mm hydroxypropyl-gamma-cyclodextrin (HP-gamma-CD) as background electrolyte; applied voltage, 16 kV; capillary temperature, 25 degrees C; detection wavelength, 254 nm; hydrostatic injection, 10 s. The separations were conducted using a 35 cm length and 50 microm i.d. uncoated fused silica capillary column. Under the optimized conditions, the components were successfully separated in about 5 min. Intraday precision of migration time and corrected peak areas when expressed as relative standard deviation ranged from 0.17 to 0.45 and 2.60 to 3.94%, respectively, while the interday precision ranged from 2.59 to 4.20 and 3.15 to 4.21%, respectively. After the validation exercise, the proposed method was applied for the determination of QC impurity in PQ formulations.     

高效液相色谱法测定硝苯柳胺含量

硝苯柳胺是合成筛选出来的一种新杀螺剂。经实验探索,以３,５－二硝基苯甲酸作内标,采用并建立了高效液相色谱法测定合成物中硝苯柳胺的含量。方法简便、准确,灵敏度高。     

气相色谱法直接测定植物生长素

 建立了一种采用 5 3 0 μm大口径毛细管色谱柱、不经衍生化处理而直接测定吲哚乙酸 (IAA)、吲哚丁酸(IBA)和萘乙酸 (NAA)等植物生长素的气相色谱分析方法。以邻苯二甲酸二丁酯为内标物 ,用 FID检测 ,IAA,IBA和 NAA的相对标准偏差分别为 1 .1 4% ,0 .61 %和 0 .78%。方法简便、快速、准确、重现性好 ,可用于生长素类单组分和混合制剂的质量检测。