钌卟啉／MCM—41催化剂的制备,表征及性质

应用３－氨丙基三乙氧基硅烷对ＭＣＭ－４１介孔分子筛进行了改性。改性产物具有较强的装载钌卟啉「Ｒｕ（Ⅱ）Ｌ（ＣＯ）（ＥｔＯＨ）」（Ｌ＝ｍｅｓｏ－ｔｅｔｒａｋｉｓ（４－ｃｌｏｒｏｐｈｅｎｙｌ）ｐｏｒｐｈｙｒｉｎ）的能力。制备了裹载０．１％－８．３％钌卟啉的产物（记为Ｒｕ／ＭＣＭ－４１（ｍ））。应用Ｘ射线衍射,差热－热失重分析和紫外－可见光谱等方法对裹载产物进行了表征。     

丁基罗丹明B-高碘酸盐动力学催化光度法测定纳克量钌

提出了在弱酸介质中钌催化高碘酸盐氧化丁基罗丹明Ｂ（ＢＲＢ）,以光度法测定钌。催化反应速率与催化剂浓度呈线性关系的范围为０．２～１８ｎｇ／２５ｍ Ｌ,检出限为２．８×１０－ １２ ｇ／ｍ Ｌ。相对标准偏差小于１４％ 。催化反应对Ｒｕ（Ⅲ）、ＢＲＢ、ＫＩＯ４ 和Ｈ３ＰＯ４ 均为一级反应,表观活性能为４２．１２ ｋＪｍ ｏｌ－ １。探讨了反应机理。本法已用于某些岩矿和冶金产品中钌的测定。ＲＳＤ为１．０２％ ～２．２９％ ,回收率为９８．７％ ～１０２．０％     

两相体系中钌膦配合物催化4—苯基—3—丁烯—2—酮加氢反应的研究

研究了水和有机物组成的两相催化体系中,由ＲｕＣｌ３－ＴＰＰＴＳ（ＴＰＰＴＳ：Ｐ（ｍ－Ｃ６Ｈ４ＳＯ３Ｎａ）３）原位反应生成的催化活性物种对４－苯基－３－丁烯－２－酮（又名苄叉丙酮）的催化加氢反应．考察了钌浓度（１．０×１０－３～６．０×１０－３ｍｏｌ／Ｌ）、氢压（１．０～６．０ＭＰａ）、反应温度（３０～７０℃）、配体浓度（１．２～７．２×１０－２ｍｏｌ／Ｌ）、阳离子表面活性剂（ＣＴＡＢ：十六烷基三甲基溴化铵）及反应时间等对加氢反应活性和选择性的影响,并与以配合物ＲｕＣｌ２（ＴＰＰＴＳ）３为催化剂前体生成的催化活性物种对加氢反应的活性及选择性进行了比较．结果表明,分别由配合物ＲｕＣｌ２（ＴＰＰＴＳ）３及ＲｕＣｌ３－ＴＰＰＴＳ原位反应生成的催化活性物种,都只催化４－苯基－３－丁烯－２－酮的Ｃ＝Ｃ键选择加氢．由配合物ＲｕＣｌ２（ＴＰＰＴＳ）３形成的催化体系的加氢活性及选择性均优于ＲｕＣｌ３－ＴＰＰＴＳ原位反应生成的催化活性物种．阳离子表面活性剂的加入,使加氢反应活性下降,选择性略有提高     

砷锑钼三元杂多酸光化学光度法测定痕量砷

砷锑钼三元杂多酸光化学分光光度法是测定０ ．０４ ～１ ．０ ｍ ｇ／ Ｌ 砷的新方法。在０ ．１２ ｍｏｌ／ Ｌ Ｈ２ Ｓ Ｏ４２ ．０ ×１０ － ４ ｍ ｏｌ／ Ｌ Ｓｂ（ Ⅲ）２ ．０ ×－ ３ ｍ ｏｌ／ Ｌ Ｍｏ（ Ⅵ）４ ％ （ Ｖ／ Ｖ） 甲醇介质中, Ａｓ（ Ⅲ） 、 Ｓｂ（ Ⅲ） 、 Ｍｏ（ Ⅵ） 形成的三元杂多酸被紫外光还原生成三元杂多蓝（λｍ ａ ｘ ＝ ７８０ ｎｍ ） 。实验结果表明,方法具有灵敏度高,选择性好,操作简便等特点。     

卟啉试剂与贵金属高灵敏显色反应的研究 Ⅴ.Ru(Ⅲ)-T(4-AOP)P-TritonX-100体系

本文研究了在Ｃｄ（Ⅱ）和ＴｒｉｔｏｎＸ－１００存在下，ｍｅｓｏ－四（４－乙酰氧基苯）卟啉［Ｔ（４－ＡＯＰ）Ｐ］与钌（Ⅲ）的显色反应。结果表明，在ｐＨ９．７～１０．３介质中，Ｒｕ（Ⅲ）与Ｔ（４－ＡＯＰ）Ｐ形成了灵敏度很高的稳定络合物，其表观摩尔吸光系数为７．０４×１０５Ｌ·ｍｏｌ－１·ｃｍ－１。钌浓度在０～１．２μｇ／１０ｍＬ范围内服从比尔定律。络合物的摩尔比为Ｒｕ（Ⅲ）∶Ｔ（４－ＡＯＰ）Ｐ＝１∶１。在掩蔽剂存在下，方法有一定的选择性，应用于合成试样中钌的测定，结果满意。     

Cr/MCM-41催化剂上的乙烯聚合行为

以纯硅ＭＣＭ４１为载体，负载Ｐｈｉｌｉｐｓ烯烃聚合催化剂活性组分Ｃｒ．ＸＲＤ及ＴＥＭ表征结果表明，所得到的Ｃｒ／ＭＣＭ４１催化剂具有良好的晶体结构和较理想的长程有序一维孔道．ＦＴＩＲ和Ｒａｍａｎ光谱表征结果表明，Ｃｒ／ＭＣＭ４１上不仅可发生乙烯聚合过程，而且形成的聚乙烯以结晶和无定形两种形态存在．乙烯聚合活性不仅与反应参数有关，而且与Ｃｒ的负载量密切相关．用于乙烯聚合后，Ｃｒ／ＭＣＭ４１催化剂仍保持其特征的晶体结构和一维孔道结构．     

钌(Ⅱ)联吡啶配合物cis-[Ru~Ⅱ(bpy)_2(L)_2]的配体取代效应(CNDO/2)

用ＣＮＤＯ／２方法经ＳＣＦ计算获得了钌（Ⅱ）联吡啶配合物ｃｉｓ－［ＲｕⅡ（ｂｐｙ）２（Ｌ）２］的电子结构（其中ｂｐｙ＝２，２′－二联吡啶；Ｌ＝Ｃｌ－，ＮＣＳ－，ＣＮ－，ＮＨ３，ＮＣＣＨ３）．计算结果表明，这些钌（Ⅱ）联吡啶配合物的ＬＵＭＯ均定域于配体ｂｐｙ的最低能π轨道，而其ＨＯＭＯ均定域于中心钌（Ⅱ）原子的ｄπ轨道．随着配体Ｌ的σ电子给予能力的增强，对应配合物的ＨＯＭＯ能级相应增大，ＬＵＭＯ能级亦有所增大，两者之差值则降低．这些钌（Ⅱ）联吡啶配合物的ＨＯＭＯ和ＬＵＭＯ能级变化趋势分别与相应的第一氧化和第一还原电势变化趋势相同，并且ＨＯＭＯ和ＬＵＭＯ能级与其光谱最低吸收能和第一氧化还原电势呈现出很好的线性相关性．计算结果与实验数据相吻合．     

两相催化体系中α，β－不饱和醛的选择性加氢反应研究Ⅰ．水溶性钌－膦配合物催化肉桂醛的加氢性能

本文研究了两种水溶性钌－膦配合物ＲｕＣｌ_２（ＴＰＰＴＳ）_３和Ｒｕｃｌ_２（ＣＯ）_２（ＴＰＰＴＳ）_２［ＴＰＰＴＳ为：Ｐ（ｍ－Ｃ_６Ｈ_４ＳＯ_３Ｎａ）_３］的合成，在水相和有机相组成的两相催化体系中，考察了它们衍生出的活性物种和以ＲｕＣｌ３－ＴＰＰＴＳ原位合成的活性物种对肉桂醛的选择加氢性能，并对反应温度（２０—８０℃），氢压（２—６ＭＰａ），催化剂浓度（１．１２×１０~（－３）～４．５０×１０~（－３）ｍｏｌ／Ｌ），配体ＴＰＰＴＳ浓度（９．０×１０~（－３）～５．４×１０~（－２）ｍｏｌ／Ｌ），表面活性剂浓度和反应时间的变化对选择加氢反应的影响进行了详细研究。实验结果表明，ＲｕＣｌ_３－ＴＰＰＴＳ原位合成配合物的催化加氢活性最高，而在金属Ｒｕ上羰基的配位将使加氢活性降低，表面活性剂ＣＴＡＢ是有效的促进剂，它的加入可大大提高加氢活性，选择适当的ＣＴＡＢ浓度，在反应结束后水相与有机相分层迅速，有利于Ｒｕ催化剂的分离，在所考察的反应条件下，肉桂醛选择加氢生成肉桂醇的转化率大于８０％，选择性达９６％以上。     

顺酐催化加氢衍生物的研究（Ⅱ）琥珀酸酐加氢制γ—丁内酯

γ－丁内酯（γ－ＢＬ）是顺酐（ＭＡ）加氢的次级衍生物。作者曾报导了顺酐加氢制琥珀酸酐的研究。这里，我们研究了不同催化剂及配体对琥珀酸酐加氢生成γ－丁内酯的反应。考察了最佳钌／三苯基膦配位催化体系，对琥珀酸酐（ＳＡ）均相催化加氢生成γ－丁内酯的反应条件：催化剂及膦配体用量、温度、压力、时间、溶液对催化反应的影响。实验表明，在钌盐为０．１５ｍｍｏｌ、Ｐ／Ｒｕ＝８、１２０℃、３．０ＭＰａ氢压下，乙二醇二     

钌（Ⅲ）－钼酸盐－罗丹明B离子缔合显色反应的研究及分析应用

钌（Ⅲ）钼酸盐－罗丹明Ｂ离子缔合显色体系分光光度测定钌，λｍａｘ为５７０ｕｍ，ε＝９．０５×１０５Ｌ·ｍｏｌ（－１）·ｃｍ（－１），相对标准偏差２．５％。线性范围０～１．２μｇ／２５ｍＬ。大量常见金属不干扰Ｒｕ的测定。方法用于某些岩矿和冶金产品中钉的测定，获得满意结果。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.