利用牛血清蛋白合成CdS纳米棒和网状纳米线

采用简单易控、对环境友好的矿化方法, 利用牛血清蛋白(BSA)做模板, 通过Cd2+与硫代乙酰胺(TAA)反应制备了形貌均一的CdS纳米棒和网状纳米线. 分别采用透射电子显微镜(TEM)、X射线能谱(EDS)、X射线衍射(XRD)、荧光(PL)发射谱和导电原子力显微镜(C-AFM)等方法对不同实验温度下制备的CdS样品的结构形貌、成分组成和光学性质及微区电子传输行为进行了表征. 结果表明: 在实验反应温度为20 ℃时, 得到的产物为单分散性好的CdS 纳米棒, 长度为250 nm, 直径为30 nm; 在50 ℃时, 得到网状CdS纳米线, 其长度为2-3 μm; CdS纳米棒和网状纳米线均为立方相闪锌矿结构. 荧光性质的测试表明, CdS纳米棒和网状纳米线具有优良的荧光性能, 电流-电压(I-V)特性的表征表明CdS纳米线具有很好的电导特性.     

有序CdS纳米线阵列的制备和光学特性

应用直流电沉积法在多孔氧化铝模板中制备了高度有序的CdS纳米线阵列,并由XRD、Raman、SEM、TEM和HRTEM等进行物理化学表征.结果表明,沉积在多孔氧化铝模板中的CdS呈六角结构,c轴沿孔长度方向定向生长.紫外吸收光谱研究表明,随着纳米线尺寸的减小,纳米线阵列的吸收边向短波长方向移动,荧光光谱测量显示,CdS纳米线阵列的荧光强度高于氧化铝模板,而且在可见光区的荧光特性与激发波长无关.     

一种新的电化学方法制备CdS纳米线阵列

用一种新的电化学方法在多孔氧化铝模板中制备了CdS纳米线阵列体系,并用XRD、TEM对样品进行表征,结果显示CdS纳米线为立方相和六方相的多晶混合结构,对沉积机理进行了讨论.荧光光谱测量显示CdS纳米线阵列体系有三个强的紫外发光带和一个黄绿发光带.该文所使用的方法可以用来在氧化铝模板中制备其它材料的纳米线阵列体系.     

聚乙烯醇辅助合成CdS纳米线及其表征

以聚乙烯醇为辅助剂, 使用溶剂热法成功制备CdS纳米线, 并用XRD、TEM、HRTEM、UV-Vis和PL(荧光)发射谱等方法对样品进行表征. 结果表明, 该法制备的CdS纳米线为六方纤锌矿结构, 直径为70 nm, 长约10 μm, 沿[001]晶向择优生长, 具有量子禁域效应. 同时, 根据对比实验结果提出了CdS纳米线的聚合物辅助生长机理.     

金纳米线阵列制备及其光谱特性

利用电化学沉积方法在重离子径迹模板中制备出直径从45 nm到200 nm, 长径比达700的金纳米线阵列, 利用扫描电子显微镜(SEM)和X射线衍射(XRD)对所制备金纳米线的形貌及晶体结构进行分析, 结果表明, 在1.5 V(无参比电极)沉积电压下所制备出的直径为200 nm金纳米线沿[100]晶向具有较好择优取向. 利用紫外-可见光谱(UV-Vis)对镶嵌在透明模板中平行排列的金纳米线阵列光学特性进行研究, 发现金纳米线直径为45 nm时, 其紫外可见光谱在539 nm处有强烈吸收峰, 随着金纳米线直径增加, 吸收峰红移, 当金纳米线直径达到200 nm时, 其吸收峰峰位移至700 nm. 结合金纳米颗粒相关表面等离子体共振吸收效应对实验结果进行了讨论.     

壳聚糖-CdS复合膜制备及其对吡啶的传感特性

利用壳聚糖（CS）易于成膜的特点，模拟生物矿化，在有机物调制下通过异相成核生长制备了CS/CdS纳米颗粒复合膜.研究了成膜条件对膜的水热稳定性和发光性能的影响，以及CS/CdS纳米颗粒复合膜对水体中吡啶的响应特性.扫描电镜分析表明CS/CdS纳米颗粒复合膜均匀性好， CdS以物理掺杂方式均匀分布于CS薄膜中， CdS颗粒尺寸在70 nm左右.但薄膜荧光光谱位置和形状表明实际发光的CdS簇集体直径小于20 nm.由此推测电镜观察到的CdS颗粒可能是由许多CdS小颗粒聚集而成，小颗粒之间因有机物的存在而相互隔离. CS/CdS纳米颗粒复合膜的荧光发射对水体中吡啶的存在十分敏感，微量吡啶的存在会引起薄膜荧光发射急剧增强.除铜和碘离子外，水体系中其他常见离子对薄膜荧光发射没有显著影响，预期CS/CdS纳米颗粒复合薄膜有可能发展成为一种重要的水体系吡啶测定专用传感薄膜材料.     

表面修饰CdS和(CdS)ZnS纳米晶的性能研究

在水相中合成了CdS纳米微粒,以ZnS对其进行表面修饰,得到具有核壳结构的(CdS)ZnS水溶性纳米晶。采用红外光谱、X射线衍射(XRD)、透射电镜(TEM)表征其粒度和形貌,紫外-可见吸收光谱(UV)、荧光光谱表征其光学特性。制得的CdS近似呈球形,直径为8nm;CdS纳米颗粒表面经ZnS修饰后,其荧光发射峰强度显著增强,表面态发射减弱。     

镉的硫族化合物半导体纳米线阵列的模板法合成及其紫外可见吸收光谱研究(英文)

以多孔氧化铝为模板 ,用交流电分别通过含有相应的CdCl2 、ZnCl2 、单质S、Se等的二甲亚砜 (DMSO)溶液 ,沉积CdS、CdSe以及CdxZn1-xS半导体纳米线阵列并研究其紫外可见吸收光谱 .实验结果表明 ,当半导体纳米线的直径小于 2 5nm时 ,其吸收边相对于体相的吸收边产生蓝移 ,而且蓝移的幅度随着半导体纳米线直径的减小而增加 ,显示了明显的量子限域效应 .     

明胶溶液中笤帚状纳米CdS的合成及其光谱特性研究

以明胶为稳定剂, 制备出CdS纳米棒, 并实现其向笤帚状纳米CdS的形貌转化. 扫描电镜(SEM)图像表明, 生长时间为2 d, 样品为棒状结构, 直径为50～140 nm, 长度为150～710 nm; 生长15 d的CdS微晶为笤帚状, 结节点直径340～620 nm, 长度2.7～8.4 μm. 探讨了其形貌转化的原因. 结合红外吸收(IR)和荧光光谱的测试结果, 提出了可能的离子络合转化和定位生长机理. 合成的CdS微晶具有一定的荧光性质, 并在紫外和荧光光谱上均表现出明显的量子尺寸效应.     

纳米CdS/聚乙烯咔唑(PVK)复合材料制备与表征

采用反相微乳法在庚烷/琥珀酸二异辛酯磺酸钠(AOT)/水体系中成功制备出纳米CdS/聚乙烯咔唑(PVK)复合材料。通过紫外-可见光谱(UV-Vis)、X射线衍射(XRD)、透射电子显微镜(TEM)、荧光光谱(PL)对复合材料进行了结构表征和形貌观察。结果表明,UV-Vis光谱吸收峰在325 nm和360 nm,表现出纳米粒子明显的量子尺寸效应;TEM照片显示纳米CdS粒径分布较窄,均匀分散在PVK中。XRD分析表明,CdS纳米颗粒已经形成。PL结果显示:产物的荧光发射光谱峰波长在375 nm和520 nm。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.