掺镍型层状LixNiyMn1-yO2正极材料的合成与电性能研究

A kind of cathode material of layered Li_xNi_yMn_1-yO₂ characterized with the O2 type has been synthesized by a simple method. Its precursor Na_xNi_yMn_1-yO₂ has been prepared from manganese dioxide， nickel hydroxide and sodium carbonate at high temperature in air and quickly cooled in cold water， then it has been exchanged by the melted LiNO₃ at 300～400℃ in air. The effects of calcine-temperature for the precursors and its compositions (the content of Na and Ni) on the electrochemical properties of the material Li_xNi_yMn_1-yO₂ have been investingated by XRD and electrochemical tests. The results show that the sample Li_0.7Ni_0.3Mn_0.7O₂， has the best electrochemical properties which shows only one charge-discharge potential stage of 2.8～3.0V and has a high specific capacity over 180mAh·g^-1 cycled between 2.0～4.20V. A significant structure transformation to the spinal-type phase has not been found in the charge-discharge cycling and the discharge specific capacity around 165mAh·g^-1 has re-mained after the 20th cyclings for the material.     

硬脂酸法制备超细K2La2Ti3O10及其酸交换性质研究

A new stearic acid method(SAM) has been used to prepare ultrafine K₂La₂Ti₃O₁₀ nanocrystalline. Each state of synthesis process was followed by the use of FT-IR analysis. The resulting materials have been characterized by means of XRD， TEM， BET surface area analysis. The acid-exchanging property of the obtained product was also studied. The experimental results showed that comparing with the product of traditional solid-state reaction， the particle size of the K₂La₂Ti₃O₁₀ synthesized by SAM is greatly reduced， BET surface area is high(more than 11.83m²·g^-1) and has different acid-exchanging properties. It can be easily exfoliated in 2mol·L^-1 HNO₃ so-lution.     

Cu1-xAgxI(x=0.5～0.6)纳米微粒的制备与表征

In the presence of PVPK30,Cu_1-xAg_xI nanoparticles were prepared by ion exchange reaction.The product was characterized by FT-IR,XRD,TEM,EDS and SPS,respectively.It was found that the value of x is ap-proximately 0.5～0.6and the average diameter of the nanoparticles is 10～20nm.The product shows surface photovoltage property of semiconductor and the existence of Cu⁺ greatly enhances the separation efficiency of photoinduced electron-hole pairs.Meanwhile,SPS of Cu_1-xAg_xI nanoparticles with different X (Ag/I)value had been investigated. The results show that when X is 0.5～0.576, the SPS intensity of Cu_1-xAg_xI nanoparticles is highest.     

LixNi0.8-yCo0.2ZnyOp的合成及电化学性能研究

A series of single-phase Li_xNi_0.8-yCo_0.2Zn_yO_p(0.96 ≤x≤ 1.10， 0 ≤y≤ 0.05， 2 ≤p≤ 2(1+y) ) (different in the y values) were synthesized by a two-step solid state reaction method， in which LiOH·H₂O， Zn-doped spherical Ni(OH)₂ and Co₂O₃ were used as the precursors. The ICP-AES analyses proved that the Zn-doped compounds synthesized had the nonstoichiometric form. The results of the XRD， SEM identified that the uniform particles of the as-prepared materials having a good layered structure were fine， narrowly distributed and well crystallized. The electrochemical performance test was carried out and the results showed that the as-prepared Zn-doped materials had not only a high capacity， but also a better cycling stability characterization than the un-doped one. The Li_1.06Ni_0.75Co_0.22Zn_0.03O_2.03 material has an initial reversible capacity as high as 160.5mAh·g^-1; and a first discharge efficiency 89.2%， and exhibits satisfactory cyclic stability with 90% retainable capacity after 50 cycles.     

CexPr1-xO2-δ复合氧化物的XRD和Raman表征

A series of Ce_xPr_1-xO_2-δ mixed oxides were synthesized by sol-gel method and characterized by Raman and XRD techniques. When x value was changed from 1.0 to 0.5, only a cubic phase CeO₂ was observed. The samples were very well crystallized on decreasing x from 0.50 to 0.99. For Ce_xPr_1-xO_2-δ samples 465 cm^-1 and 1 150 cm^-1 Raman peaks are attributed to the Raman active F_2g mode of CeO₂. The broad peak at about 570 cm^-1 in the region of 0.3 ≤x≤ 0.99 can be linked to lattice defects resulting in oxygen vacancies. The new band at about 195 cm^-1 may be attributed to the asymmetric vibration caused by the formation of oxygen vacancies. Calcination temperatures had great effect on the peak intensity for CeO₂ but less effect on Ce_0.8Pr_0.2O_2-δ in Raman spectra. It might be due to the transformation of the colors for the mixed oxides, the insertion of Pr atom into the ceria lattice could enhance the sintering resistance and thermal stability of the mixed oxides.     

CuO/Sn0.8Ti0.2O2催化剂的表征及对NO+CO反应活性研究

Reducibility and characteristics of CuO/Sn_0.8Ti_0.2O₂ catalysts were examined by using a microreactor-GC NO+CO reaction system, BET, TG-DTA, FTIR, XRD and H2-TPR techniques. CuO/Sn_0.8Ti_0.2O₂ had high activity in NO+CO reaction, showing 93% NO conversion at 300 ℃ in air, and 100% NO conversion at 225 ℃ after H₂ pretreatment. The pore size distribution of Sn_0.8Ti_0.2O₂ was mainly as micro-pores and meso-pores (1~5 nm), and the specific surface area and total pore volume of Sn_0.8Ti_0.2O₂ were 69 m²·g^-1 and 0.15 cm³·g^-1, respectively. As shown by XRD analysis, there was no CuO crystal diffraction peak at 9%CuO loading, but two CuO crystal diffraction peaks at 2θ 35.5° and 38.7° were present at 12% CuO loading. FTIR detected the adsorption of NO and CO on the surface of reduced 12%CuO/Sn_0.8Ti_0.2O₂. The Cu²⁺ sites and support surface adsorbed NO, and the process of NO adsorption led to the formation of N₂O and NO₃^-. In contrast, the Cu⁺、Cu⁰ sites and support surface adsorbed CO, and when the mixed gases of NO and CO were adsorbed by support surface, no NO₃^- was formed. H₂-TPR showed four reduction peaks (α, β, γ and δ). The α, β and γ peaks were the reductions of CuO species, and the δ peak was the reduction of Sn_0.8Ti_0.2O₂.     

LiNi1-xMxVO4的红外光谱和拉曼光谱研究

The vanadates of LiNi_1-xM_xVO₄(M=Fe,Co,Ni) containing VO₄ tetrahedrons were synthesized by soft chemical method through a new mild liquid route. The samples sintered at 450℃ for 3h and at 650℃ for 3h are named for LT-LiNiVO₄ and for MT-LiNi_1-xM_xVO₄ respectively. All of the products were measured by X-ray diffraction, IR and Raman spectra respectively. In comparison with IR spectra of V₂O₅ and NiO, the LT-LiNiVO₄ has a strong and broad IR absorption band of VO₄ tetrahedrons located at 600～850cm^-1 with three small splitting peaks corresponding to the asymmetry stretching vibrations of V-O bonds. The results of IR and Raman spectra for MT-LiNi_1-xM_xVO₄ show that the cations of Ni²⁺, Co²⁺, Fe²⁺ have the influences on the frequency shifts of the V-O vibrations.     

纳米Mn-Zn铁氧体的制备和研究

Nanosize manganese zinc ferrites were fabricated by hydrothermal precipitation route using Fe₂(SO₄)₃, ZnSO₄·7H₂O, MnSO₄·H₂O as material, then some calcinated at 500 ℃ and studied by XRD, TEM, IR and VSM. The results showed that the products were spinel crystal structure and uniformly sized nanoparticles (15～25 nm) with little aggregation. The analysis of IR showed that the superficial water can be eliminated, but that was embedded in crystal lattice can not be removed by calcinating. The effect Zn content x on the lattice (a) of nanosize Mn_1-xZn_xFe₂O₄ was also discussed. The lattice of nanosize Mn_1-xZn_xFe₂O₄ decreases with x increasing; and its value deviated the standard lattice (a₀) of normal size manganese zinc ferrites. A lot of water was absorbed during the hydrothermal process owing to the large surface of nanosize particles. The change of magnetic properties of Mn_xZn_1-xFe₂O₄ with x increasing was studied: nanosize Mn_xZn_1-xFe₂O₄ particles synthesized by us exhibited peculiar magnetic properties curve with Zn content (x) increasing, Superparamagnetic behaviors of the synthesized ZnFe₂O₄ samples were confirmed by magnetic characterization, which can be explained by the difference between the distribution of the metal ions (Mn²⁺, Zn²⁺ and Fe³⁺) among the tetrahedral (A) and the octahedral (B) sites of nanosize ferrite and that of bulk ferrite.     

Cr/CeO2体系及其对乙烷脱氢反应催化性能的研究

The dehydrogenation reaction of ethane over Cr/CeO₂ catalysts in presence of CO₂ was studied with fixed-bed micro-reactor. The Cr/CeO₂ catalysts of different Cr loading have been synthesized using impregnation techniques. The Cr/CeO₂ system has already been found to be active and selective in the reaction at around 740 ℃. The function of carbon dioxide is to remove coke and hydrogen to accelerate dehydrogenation of ethane. The results of catalysts characterizations indicated that Cr³⁺ and Cr⁶⁺ occurred on the surface of the catalysts. The 1.2 mmol Cr/100m₂ CeO₂ catalyst sample with a monolayer dispersion of Cr on CeO₂ support showed a stronger surface acidity and a maximum yield of ethylene of about 35.5% at 36.6% conversion of ethane.     

纳米晶SnO2粉体的合成

Crystalline tin oxide nanoparticles were synthesized by the direct precipitation from the starting material granulated tin. TG-DTA of the precursor showed a heavy weight loss at about 130℃ accompanied by an endothermic peak， two exothermic peaks above 200℃ accompanied by small weight loss indicated the decomposition and the oxidation of residual NO₃^- ion and PEG. XRD showed that obtained particles agreed well with the determination result of bulk SnO₂. The broadened XRD patterns became sharper as the calcining temperature turned to higher， it was indicated that the growth of the particle was exhibited. The surface area of the particles calcined at 300℃ was 161.1m²·g^-1 and declined as the calcining temperature turned to higher. TEM showed an heavier agglomeration at higher temperature.     

Ceramic Filter Balls Loaded with α-Fe2O3 and Their Application to NH3-N Wastewater Treatment

Hydrolysis reaction of Fe(NO₃)₃ at a high temperature in the presence of urea as the homogeneous precipitant was studied. With the prepared ceramic filter balls loaded with α-Fe₂O₃ after high temperature calcination, the loading of α-Fe₂O₃ on the porous ceramic filter balls from Fe(NO₃)₃ solutions of different concentrations and mechanical stability of the loaded α-Fe₂O₃ were studied. The product was characterized using XRD and SEM. Adsorption experiments were conducted to evaluate the performance of the product in adsorbing NH₃-N. It turned out that the specific surface area of the ceramic filter balls loaded with α-Fe₂O₃ had increased to 36.5387 m²/g from original 4.6127 m²/g. When the concentration of Fe(NO₃)₃ was 0.40 mol/L, the loading of α-Fe₂O₃ on the ceramic filter balls accounted for 8.4% of the total mass of the adsorbent and α-Fe₂O₃ was adsorbed on the filter balls very well. The adsorption isotherm of NH₃-N on the ceramic filter ball adsorbent loaded with α-Fe₂O₃ was of Langmuir type. The saturated adsorption capacity was 3.33 mg/L, and the adsorption constant K was 0.1873. NH₃-N was adsorbed by α-Fe₂O₃ more easily, which was a kind of specific adsorption.     

Bi2WO6量子点(QDs)修饰Bi2MoO6-xF2x异质结的构筑及其催化活性增强机理

采用简单沉积-沉淀法合成了Bi₂WO₆@Bi₂MoO_6-xF_2x（BWO/BMO6-xF2x）异质结,借助XRD、XPS、TEM、SEM、EDS、UV-Vis-DRS、PC和EIS等测试技术对其组成、形貌、光吸收特性和光电化学性能等进行系统表征,并以模型污染物罗丹明B（RhB）的光催化降解作为探针反应来评价Bi₂WO₆@Bi₂MoO_6-xF_2x异质结的光催化活性增强机制。形貌分析表明,所得Bi₂MoO₆微球由大量厚度为20~50 nm的纳米片组成;FE-SEM和HR-TEM分析表明,尺寸约为10 nm的Bi₂WO₆量子点均匀沉积在Bi₂MoO_6-xF_2x微球表面,形成新颖的Bi₂WO₆@Bi₂MoO_6-xF_2x异质结;与纯Bi₂MoO₆或者Bi₂WO₆相比,1∶1Bi₂WO₆@Bi₂MoO_6-xF_2x异质结表现出更好的光催化活性和光电流性质,其对RhB光催化降解的表观速率常数分别为纯BMO和BWO的6.4和11.6倍。PC和EIS图谱分析表明,Bi₂WO₆量子点表面沉积显著提高Bi₂MoO_6-xF_2x光生电子/空穴的分离效率和迁移速率;活性物种捕获实验证明了·O₂^-和h⁺是主要的活性物种。根据实验结果,探讨了F^-掺杂和Bi₂WO₆量子点之间的协同效应对Bi₂MoO₆的光催化活性的影响机制。     

高性能Ce0.35Zr0.55Y0.1O1.95稀土储氧材料的研究

The oxygen storage material (OSM) Ce_0.35Zr_0.55Y_0.1O_1.95 was prepared by co-precipitation routine and studied by means of TEM, XRD, XPS, BET, H₂-TPR and oxygen storage capacity (OSC) measurements. The results indicated that this material possessed plenty of Ce³⁺ and lattice oxygen vacancy (percentage of Ce³⁺ was 59.6%) and high cerium atom utilization ratio (80.04%). The porous material was with an average BET surface area of 97 m²·g^-1 and pore volume of 0.26 mL·g^-1. After aged at 1 000 ℃ in air for 5 h, the sample still possessed plenty of Ce³⁺ and lattice oxygen vacancy (percentage of Ce³⁺ was 57.1%), and showed high cerium atom utilization ratio (78.25%), and high thermal stability.     

新生态二氧化锰的性质及pH值影响除砷效果的研究

Fresh MnO₂ was prepared by oxide reduction using KMnO₄ and MnSO₄. The structure and property of the products were characterized by TEM, SEM, XRD and BET, and the effect of pH value was studied on the removal of both As(Ⅴ) and As(Ⅲ). The results show that δ-MnO₂ is spherical, its specific surface is 325 m²·g^-1 with lots of hydroxyl on the surface. Adsorption of fresh MnO₂ of As(Ⅲ) was a corporate action of both oxide reaction and electrostatic adsorption, but the adsorption of As(Ⅴ) was due to electrostatic and anion exchange adsorption.     

新型配合物Mn2Hg4(SCN)12的合成与晶体结构分析

A new inorganic coordination compound Mn₂Hg₄(SCN)₁₂ was synthesized. The grown crystals were characterized by elemental analysis, infrared spectroscopic analysis and powder crystal X-ray diffraction in detail. The crystal structure of Mn₂Hg₄(SCN)₁₂ was determined by single-crystal X-ray diffraction. It belongs to monoclinic system, P2₁/c space group. The cell dimensions are: a=1.171 6 nm, b=1.431 05 nm, c=2.105 1 nm, β=100.738°, and Z=4. In the structure of it, half of Mn²⁺ cations have five-coordinate number, and other half of Mn²⁺ cations have six-coordinate number; 3/4 of Hg²⁺ cations are coordinated by four SCN^-, 1/4 of Hg²⁺ cations are coordinated by three SCN^- and one NCS^-, all the coordination geometry of Hg²⁺ show slightly distorted tetrahedrons. CCDC: 244939.     

离子层气相反应法(ILGAR)制备CuInS2薄膜的研究

CuInS₂ thin films have been prepared by ion layer gas reaction (ILGAR) using C₂H₅OH as solvent, CuCl and InCl₃ as reagents and H₂S gas as sulfuration source. The effects of cationic concentrations and numbers of cycle on the properties of CuInS₂ film were investigated. The chemical composition, crystalline structure, surface topography, deposited rate, optical and electronic properties of the films were characterized by X-ray diffractrometry (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), ultraviolet-visible spectrometry (UV-Vis) and Hall System. The results show that the crystalline of CuInS₂ thin films and the deposition rate have been improved with the increase of cationic concentration, while CuxS segregation phases appear with further increasing cationic concentration. The deposition rate is close to constant as cationic concentration is fixed. CuInS₂ thin film derived form lower cationic concentration is uniform, compact and good in adhesion to the substrates. The absorption coefficient of CuInS₂ thin films is larger than 10⁴ cm^-1, and the band gap E_g is in the range of 1.30～1.40 eV. The dark resisitivity of the thin film decreases from 50 to 10 Ω·cm and the carrier concentration ranges are over 10¹⁶ cm^-3.     

预氧化固气法合成LiNiO2的研究

LiNiO₂ was prepared by reaction of stoichiometric amounts of thoroughly-mixed LiOH·H₂O and preoxidation nanometer-scale Ni₃O₂(OH)₄ powders in O₂ at the temperature of 700℃ for 6h. The products were tested by XRD， XPS， SEM and electrochemistry methods. It was shown that product was LiNiO₂ single-phase， and the valence of nickel was +3; the average size of it was 40nm; its initial charge specific capacity is 168mAh·g^-1 and the coulomb efficiency is 90%; the second charge specific capacity is 160mAh·g^-1 and the coulomb efficiency is 96%.     

水热法制备高纯超细CeO2-ZrO2复合氧化物

Superfine composite powders of CeO₂-ZrO₂ (CZ) and CeO₂-ZrO₂-La₂O₃ (CZL) were prepared by hydrothermal method. The effects of pH、temperature and time for hydrothermal process on the performance of the resulting powders were studied. The optimized reaction parameters were on follows: the precursor′s pH≈9.0, hydrothermal temperature of 200 ℃ holding for 2 h. Thermal stable powders with average particle size smaller than 10 nm and specific surface area of 171 m²·g^-1 were obtained. A BET specific surface area was still at 44 m²·g^-1 after calcination at 1 000 ℃ for 6 hours.     

梯度材料LiNi0.8Co0.2O2的合成与表征

The gradient composite LiNi_0.8Co_0.2O₂ was synthesized using spherical Ni(OH)₂ particle coated by a sol-gel containing cobalt and lithium. The precursor was examined by DSC-TG. The gradient composite was characterized by SEM, EDS, XPS, XRD and ICP-AES. The XPS, EDS and ICP-AES results show that content of cobalt in the surface is higher than in the center of the spherical particle of the gradient composite. The first discharge specific capacity of the gradient composite sintered at 700 ℃ is 187.3 mAh·g^-1.     

CrOx/ SBA-15介孔催化剂上丙烷在二氧化碳气氛中脱氢反应的研究

The structure and catalytic properties based on Chromium Oxide supported on mesoporous SBA-15 for oxidative dehydrogenation of propane by CO₂ have been studied by using X-ray diffraction (XRD), ultraviolet-visible diffuse reflectance spectra (UV-Vis DRS), electron spin resonance (ESR), X-ray photoelectron spectroscopy (XPS) and propane pulsing experiments in the absence of gas-phase O₂. It has been shown that propane conversion and propene yield increase with Cr loadings. The propane conversion and propene yield on CrO_x(Cr: 10wt%)/SBA-15 catalyst for oxidative dehydrogenation of propane by CO₂ at 550 ℃ reach 24.8% and 21.8%, respectively .The results of ESR, UV-Vis DRS and propane pulsing experiments indicate that Cr^Ⅲ in the CrO_x/ SBA-15 catalyst is the main active species in oxidative dehydrogenation of propane by CO₂ and Cr^Ⅵ, Cr^Ⅴ is inactive in dehydrogenation.