掺镍型层状LixNiyMn1-yO2正极材料的合成与电性能研究

A kind of cathode material of layered Li_xNi_yMn_1-yO₂ characterized with the O2 type has been synthesized by a simple method. Its precursor Na_xNi_yMn_1-yO₂ has been prepared from manganese dioxide， nickel hydroxide and sodium carbonate at high temperature in air and quickly cooled in cold water， then it has been exchanged by the melted LiNO₃ at 300～400℃ in air. The effects of calcine-temperature for the precursors and its compositions (the content of Na and Ni) on the electrochemical properties of the material Li_xNi_yMn_1-yO₂ have been investingated by XRD and electrochemical tests. The results show that the sample Li_0.7Ni_0.3Mn_0.7O₂， has the best electrochemical properties which shows only one charge-discharge potential stage of 2.8～3.0V and has a high specific capacity over 180mAh·g^-1 cycled between 2.0～4.20V. A significant structure transformation to the spinal-type phase has not been found in the charge-discharge cycling and the discharge specific capacity around 165mAh·g^-1 has re-mained after the 20th cyclings for the material.     

纳米尖晶石LixMn2O4的制备与电化学性能表征

Nano-spinel Li_xMn₂O₄(0.6 ≤x≤ 1.0) was synthesized by two steps of coprecipitation and calcination. The influences of calcination temperature, time and Li/Mn ratio on the crystal structure and the particle size of Li_xMn₂O₄ were investigated. It was shown that the higher the calcination temperature, the more complete the crystal structure, and the larger the particle size. Moreover, the influence of calcination time on the crystal structure was insignificant when it was more than 3h at 700℃. With the increase of x in Li_xMn₂O₄ in the range of 0.6～1.0, the d111 and lattice parameter a increased first and then decreased. The electrochemical properties of nano-spinel LiMn₂O₄ using as cathode material of lithium-ion battery were studied. The low discharge capacity might be due to the irreversible capacity loss brought by the large surface area and lattice vacancies of the nano-spinel.     

层状O2结构锂锰氧化物Li0.60[MgxCoyMn1-x-y]O2的制备及结构表征

本文采用离子交换法分别制备了双复合锂锰氧化物Li_0.60[Mg_xMn_1-x]O₂(0.05 ≤ x ≤ 0.15)和三复合锂锰氧化物Li_0.60[Mg_xCo_yMn_1-x-y]O₂(x=0.05，0.05 ≤      

钴掺杂镍酸锂的密度泛函计算及电化学性能

LiNiO₂ and LiNi_0.5Co_0.5O₂ cathodes for lithium-ion batteries were synthesized with co-precipitation method and their electrochemical property was characterized by Galvanostatic cycling. Meanwhile, plane-wave pseudopotential method base on density functional theory was used to calculate average cell voltage and the electronic structure of LiNiO₂ and LiNi_0.5Co_0.5O₂. The experimental and computational results showed that the average voltage of the cell decreased as Li-ion intercalated to the host cathode (discharge); The potential of Li_xNi_0.5Co_0.5O₂ was higher than that of Li_xNiO₂ (when 0.25≤x≤0.5). The calculations also indicated that the distortion of the NiO₆ octahedron in Li_xNiO₂ was decreased by Co-doped. During the Li-ion intercalates to the host cathode, the micro-structures of NiO₆ and CoO₆ in the Li_xNi_0.5Co_0.5O₂ were mutually stabilized, the Jahn-Teller effect was weakened and the electrochemical properties of the materials were enhanced.     

钙钛矿型LaxSr1－xNi1－yCoyO3光电催化活性研究

用甘氨酸-硝酸盐燃烧合成法, 制备La_xSr_1－xNi_1－yCo_yO₃复合氧化物的陶瓷粉末, 对钙钛矿氧化物进行了XRD结构分析. 在通氧或不通氧下测试氧还原和氧析出的循环伏安曲线. 结果表明: 该氧电极具有双功能催化特性, 但不完全可逆. 利用汞灯作为激发光源, 进行几种水溶性染料和五种混合染料光解实验, 利用紫外-可见、红外以及人工神经网络光度法研究La_xSr_1－xNi_1－yCo_yO₃的催化性能. 结果表明: La_xSr_1－xNi_1－yCo_yO₃ (x＝0.7, 0.9, 1; y＝0.3, 0.75)复合氧化物都具有较强光催化特性; La_xSr_1－xNi_1－yCo_yO₃的光催化活性高于La_xSr_1－xNiO₃, 这与B位离子(Ni^2—, Co^2－)的电子构型有关; Co^2＋的加入可使La_xSr_1－xNiO₃的光催化活性有所提高.     

纳米钙钛矿LaxSr1-xFe1-yCoyO3复合氧化物的制备和表征

用甘氨酸-硝酸盐燃烧合成法，制备La_xSr_1-xFe_1-yCo_yO₃复合氧化物的陶瓷粉末，对该钙钛矿型氧化物进行了XRD、IR、紫外漫反射光谱及循环伏安曲线分析。结果表明：该复合氧化物粉体平均晶粒为15.3～29.8 nm,为立方和正交晶系。该氧电极具有双功能催化特性，但不完全可逆。对水溶液染料进行光解实验，利用紫外-可见、人工神经网络光度法研究La_xSr_1-xFe_1-yCo_yO₃的催化性能。结果表明：CO²⁺的加入可使La_xSr_1-xFeO₃的光催化活性有所提高，B位离子(Fe³⁺，CO²⁺)改变与加入，使La_xSr_1-xFe_1-yCo_yO₃(x=0.7，0.3；y=0.3，0.9，1)光催化活性高于La_xSr_1-xFeO₃。同时，对5种染料进行紫外光解，在0.75 h，脱色率大于91%，并为动力学一级反应。     

LiNi1-xMxVO4的红外光谱和拉曼光谱研究

The vanadates of LiNi_1-xM_xVO₄(M=Fe,Co,Ni) containing VO₄ tetrahedrons were synthesized by soft chemical method through a new mild liquid route. The samples sintered at 450℃ for 3h and at 650℃ for 3h are named for LT-LiNiVO₄ and for MT-LiNi_1-xM_xVO₄ respectively. All of the products were measured by X-ray diffraction, IR and Raman spectra respectively. In comparison with IR spectra of V₂O₅ and NiO, the LT-LiNiVO₄ has a strong and broad IR absorption band of VO₄ tetrahedrons located at 600～850cm^-1 with three small splitting peaks corresponding to the asymmetry stretching vibrations of V-O bonds. The results of IR and Raman spectra for MT-LiNi_1-xM_xVO₄ show that the cations of Ni²⁺, Co²⁺, Fe²⁺ have the influences on the frequency shifts of the V-O vibrations.     

LixNi0.5Co0.5O2的态密度计算及电化学性能研究

>为获得综合性能更好的锂离子二次电池正极材料, 分析了Co掺杂对Li_xNiO₂电化学性能的影响. 采用密度泛函DFT理论对Li_xNiO₂和Li_xNi_0.5Co_0.5O₂的平均放电电压和态密度进行了计算. 同时, 用共沉淀法制备了Li_xNiO₂和Li_xNi_0.5Co_0.5O₂锂离子二次电池正极材料, 并对其进行了XRD结构分析和恒流充放电测试. 实验和计算结果表明: 随锂离子嵌入正极(电池放电), 电池的电压逐渐降低, 材料的态密度峰向低能量方向移动; 与Li_xNiO₂相比, Li_xNi_0.5Co_0.5O₂的电压平台相对较高(当0.25≤x≤0.5), 而且在Li^＋嵌/脱时, Li_xNi_0.5Co_0.5O₂的结构变化相对较小; Co离子的掺入, 减小了NiO₆八面体的畸变度, 使材料的电化学稳定性得以提高. 在钴掺杂镍酸锂体系中, NiO₆和CoO₆具有相互的稳定作用.     

多元掺杂尖晶石型Li1.02MxMn2-xQyO4-y正极材料的电化学特性

The effect of doping on the electrochemical performance was studied for spinel type Li_1.02M_xMn_2-xQ_yO_4-y used as cathode material in lithium-ion battery. TG/DTA curves of the precursor(the raw materials) doped with different elements were studied. The spinel materials Li_1.02Mn₂O₄, Li_1.02Co_0.02Cr_0.01La_0.01Mn_1.96F_0.02O_3.98, Li_1.02Co_0.02Cr_0.01 La_0.01Mn_1.96Cl_0.02O_3.98, Li_1.02Co_0.02La_1.02Mn_1.97Cl_0.02O_3.98, Li_1.02Co_0.02Cr_0.01Mn_1.97O₄, were prepared by solid-state reaction method after the pretreatment of conversion under low temperature and uniform mixing. X-ray diffraction patterns showed that all the samples had perfect spinel structure. SEM indicated that the particles of the samples had uniform size and were distributed evenly. The results of the charge/discharge curves showed that Li_1.02Co_0.02Cr_0.01La_0.01Mn_1.96F_0.02O_3.98 had better performance than other materials according to the inhibition of decline of reversible capacity of spinel Li_1.02M_xMn_2-xQ_yO_4-y. Therefore, cycle performance had been improved so obviously that 93.9% of the initial capacity were preserved after 100 cycles. Furthermore, electrochemical impedance tests were carried out with the spinel Li_1.02Co_0.02Cr_0.01La_0.01Mn_1.96F_0.02O_3.98 as working electrode, Lithium as counter electrode and reference electrode. Results showed that this material possessed good charge/discharge reversible capability and had the lowest impedance in 3.95～4.25 V range (on the stage of charge / discharge).     

直接Z型Zn2SnO4-xNx/ZnO1-yNy异质结光催化剂的制备及机理

采用微波溶剂热法成功制备直接Z型Zn_2SnO_(4-x)N_x/ZnO_(1-y)N_y核壳结构异质结光催化剂。2种物质不同的功函数改变了其表面电荷密度,并在界面处形成内建电场,导致其从传统的Ⅰ型镶嵌异质结转变为Ⅱ型异质结,再转变为Z型异质结构。N杂质原子替代O原子进入Zn_2SnO_4和ZnO的晶格,在两者的价带(VB)顶部形成双杂质能级。核壳结构的Z型异质结光催化剂对罗丹明B的降解速率为纯相Zn_2SnO_(4-x)N_x的1.40～1.43倍,同时具有良好的循环稳定性,且可以降解亚甲基蓝、甲基橙、水杨酸等污染物。Z型异质结的形成使其光生电子-空穴对具有较强的氧化还原能力,而双杂质能级的存在可以拓宽其光响应范围并提高载流子的分离效率。因此,Zn_2SnO_(4-x)N_x/ZnO_(1-y)N_y异质结光催化剂高的光催化活性归因于Z型异质结和双杂质能级的协同作用。     

共沉淀法制备LiMn_xCo_yO_2的显微结构及其电化学性能

通过共沉淀法制备前驱体,随后在900℃下经不同时长烧结得到了层状LiMn_xCo_yO_2。X射线衍射、扫描电镜和透射电镜的研究结果表明,层状LiMn_xCo_yO_2的晶体结构是菱面体点阵,空间群是R3m,点阵常数与LiCoO_2非常接近。不同烧结时长下得到的样品在扫描电镜下均呈球状,随着烧结时间延长,球形规整度变得更好。对不同样品的电化学性能测试表明,烧结时间越长,样品中Mn的相对含量越高,其首次充放电比容量和循环性能越好。     

共沉淀法制备LiMnxCoyO2的显微结构及其电化学性能

通过共沉淀法制备前驱体,随后在900 ℃下经不同时长烧结得到了层状LiMn_xCo_yO₂。X射线衍射、扫描电镜和透射电镜的研究结果表明,层状LiMn_xCo_yO₂的晶体结构是菱面体点阵,空间群是R3m,点阵常数与LiCoO₂非常接近。不同烧结时长下得到的样品在扫描电镜下均呈球状,随着烧结时间延长,球形规整度变得更好。对不同样品的电化学性能测试表明,烧结时间越长,样品中Mn的相对含量越高,其首次充放电比容量和循环性能越好。     

基于Cu-Fc配位聚合物衍生的Pt-Cu/CuxFeyO@C催化1,4-丁炔二醇加氢性能研究

1,4-丁烯二醇是精细化工领域的重要中间体,有着广泛的应用.采用异丙醇还原氯铂酸制备Pt纳米颗粒,并通过浸渍法将其负载于1,1’-二茂铁二羧酸(Fc)与CuCl_2·2H_2O水热法合成的Cu-Fc配位聚合物,干燥焙烧后制备得到Pt-Cu/Cu_xFe_yO@C催化剂,利用XRD、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、热重分析仪(TG)、N_2吸附脱附仪等表征手段对所制备的催化剂进行表征,对比了催化剂焙烧前后加氢效果,并考察了催化剂与底物的物质的量之比对1,4-丁炔二醇加氢制备1,4-丁烯二醇的影响.结果表明,以焙烧后制备的5%Pt-Cu/Cu_xFe_yO@C催化剂,在n催化剂∶n原料=1∶2 000,温度为120℃,H_2压力为4 MPa,反应时间为30 min的条件下,加氢反应的转化率为100%,生成1,4-丁烯二醇选择性为96.1%.     

Floating Zone Crystal Growth and Structure Analysis of a Novel ScB19 Family Compound, ScB19+xSiy

Single crystals of a novel ScB₁₉ family compound ScB_19+xSi_y were grown by the floating zone method using a four-lamp mirror-type image furnace. A small amount of silicon addition to ScB₁₉ which decomposes at elevated temperatures without melting allowed it to coexist with the liquid phase and as a resultant made the floating zone crystal growth possible. Powder X-ray diffraction analysis confirmed the grown crystals of ScB_19+xSi_y to be isostructural to ScB₁₉. It was found that the crystal structure of ScB_19+xSi_y solved based on single-crystal X-ray data is tetragonal with lattice constants of a, b=1.03081(2) nm, c=1.42589(3) nm, space group P4₁2₁2 or P4₃2₁2 and is basically isotypic with α-AlB₁₂ structure type. In the crystal structure boron atoms form a three-dimensional framework based on interconnected B₁₂ icosahedra and B₂₂ polyhedra. The Sc atoms reside in three of five Al sites in the α-AlB₁₂ structure and Si resides in a bridge site bonding two B₂₂ units.     

NbS_(2-x)Se_x的制备、表征及其摩擦学性能

本文采用固相反应合成了NbS2-xSex纳米材料。并分别采用XRD、SEM、TEM、HRTEM进行了结构、形貌和成分的分析表征。系统研究了合成温度、保温时间及不同掺杂量对产物晶型和形貌演化的影响及规律性。结果表明Se的掺杂使NbS2-x Sex的形貌由纳米带(板)转变为纳米片,衍射峰明显宽化,峰强变弱,晶粒细化。且掺杂量、保温温度及时间对产物的形貌影响较大;在750℃下保温2 h得到的掺杂5at%Se的NbS1.9Se0.1形貌良好。将NbS2-xSex作为液体石蜡油的添加剂的UMT-2摩擦学实验结果表明掺杂后的NbS2-xSex具有优异的摩擦性能,其中掺杂5at%的Se在750℃下保温2 h的NbS1.9Se0.1摩擦性能最佳,同时对其摩擦机理进行了解释。     

NbS2-xSex的制备、表征及其摩擦学性能

本文采用固相反应合成了NbS_2-xSe_x纳米材料。并分别采用XRD、SEM、TEM、HRTEM进行了结构、形貌和成分的分析表征。系统研究了合成温度、保温时间及不同掺杂量对产物晶型和形貌演化的影响及规律性。结果表明Se的掺杂使NbS_2-xSe_x的形貌由纳米带(板)转变为纳米片,衍射峰明显宽化,峰强变弱,晶粒细化。且掺杂量、保温温度及时间对产物的形貌影响较大;在750℃下保温2h得到的掺杂5at%Se的NbS_1.9Se_0.1形貌良好。将NbS_2-xSe_x作为液体石蜡油的添加剂的UMT-2摩擦学实验结果表明掺杂后的NbS_2-xSe_x具有优异的摩擦性能,其中掺杂5at%的Se在750℃下保温2h的NbS_1.9Se_0.1摩擦性能最佳,同时对其摩擦机理进行了解释。     

CuxCe1-xO2-x/SBA-15/堇青石整体式催化剂及其CO催化氧化性能

以堇青石蜂窝陶瓷为载体,CuxCe1-xO2-x/SBA-15为催化活性组分,制备了一系列10%~60%Cu0.5Ce0.5O1.5/SBA-15/堇青石和50%CuxCe1-xO2-x/SBA-15/堇青石(x=0~1)整体式催化剂,采用低温氮吸附-脱附、XRD、XPS和H2-TPR对催化剂进行了表征,在微型固定床反应器中评价了催化剂的CO催化氧化活性。结果表明:整体式催化剂仍然保持SBA-15的介孔结构,催化剂中除了堇青石的物相外,还有CuO和CeO2物相,催化剂表面的Cu以Cu2+和Cu+两种状态存在,Ce以Ce4+状态存在,催化剂表面的氧化还原性能与Cu0.5Ce0.5O1.5的含量和Cu、Ce的比例有一定的关系,50%Cu0.5Ce0.5O1.5/SBA-15/堇青石催化剂具有最好催化活性,CO可以在140℃完全转化。