Error and jitter e ect studies on the SLED for the BEPCⅡ-linac

An RF pulse compressor is a device used to convert a long RF pulse to a short one with a much higher peak RF magnitude. SLED can be regarded as the earliest RF pulse compressor to be used in large-scale linear accelerators. It has been widely studied around the world and applied in the BEPC and BEPCⅡ linac for many years. During routine operation, error and jitter effects will deteriorate the performance of SLED, either on the output electromagnetic wave amplitude or phase. The error effects mainly include the frequency drift induced by cooling water temperature variation and the frequency/Q₀/β unbalances between the two energy storage cavities caused by mechanical fabrication or microwave tuning. The jitter effects refer to the PSK switching phase and time jitters. In this paper, we re-derive the generalized formulae for the conventional SLED used in the BEPCⅡ linac, and the error and jitter effects on SLED performance are also investigated.     

Optical terminal analysis of a multigrating tiled compressor in a PW-class CPA-laser

In the highest-power chirped-pulse amplification lasers, the pulse must be stretched in time, amplified, compressed in a grating compressor and subsequently focused by off-axis parabola to obtain a high peak power. In the optical terminal, the temporal and spatial effects of mismatched multigrating tiled compressor on the far-field pulse are critical factors to be analysed. In this paper, a k-space raytracing model is proposed for the temporal and spatial analyses of possible errors in a four-grating single-pass tiled compressor. The results show that the last grating affects mainly the partial focal spot, while the middle two gratings affect the temporal waveform, and the partial focal spot needs much higher error control than that in the temporal domain in a picosecond pulse compression.     

Influence of group-delay ripple on timing jitter induced by SPM and IXPM in systems with dispersion compensated by CFBG

An analytical expression was proposed to analyze the influence of group-delay ripple(GDR)on timing jitter induced by self-phase modulation(SPM)and intra-channel cross-phase modulation(IXPM)in pseudo- linear transmission systems when dispersion was compensated by chirped fiber Bragg grating(CFBG). Effects of ripple amplitude,period,and phase on timing jitter were discussed by theoretical and numerical analysis in detail.The results show that the influence of GDR on timing jitter changes linearly with the amplitude of GDR and whether it decreases or increases the timing jitter relies on the ripple period and ripple phase.Timing jitter induced by SPM and IXPM could be suppressed totally by adjusting the relative phase between the center frequency of the pulse and the ripples.     

High accuracy amplitude and phase measurements based on a double heterodyne architecture

In the digital low level RF (LLRF) system of a circular (particle) accelerator, the RF field signal is usually down converted to a fixed intermediate frequency (IF). The ratio of IF and sampling frequency determines the processing required, and differs in various LLRF systems. It is generally desirable to design a universally compatible architecture for different IFs with no change to the sampling frequency and algorithm. A new RF detection method based on a double heterodyne architecture for wide IF range has been developed, which achieves the high accuracy requirement of modern LLRF. In this paper, the relation of IF and phase error is systematically analyzed for the first time and verified by experiments. The effects of temperature drift for 16 h IF detection are inhibited by the amplitude and phase calibrations.     

The study of underwater acoustic communication technology based-on the acoustic vector sensor

Underwater acoustic (UWA) communication based on an acoustic vector sensor is studied. The method of joint weighted sound pressure and velocity processing is used in phase modulation high-speed UWA communication system combined with coherent demodulation and adaptive equalization algorithm to demodulate and decode. Whereas the sound intensity could be used instead of pressure for frequency decoding in frequency modulation UWA communication system. The results of theory analysis, simulation calculations and lake trials have shown that either in phase modulation or in frequency modulation UWA communication system, the processing gain can be evidently increased, so that the BER (bit error rate) can be effectively reduced and the telemetry distance can be enlarged by using the acoustic vector sensor.     

Optimization of High-Order Harmonic by Genetic Algorithm for the Chirp and Phase of Few-Cycle Pulses

The brightness of a particular harmonic order is optimized for the chirp and initial phase of the laser pulse by genetic algorithm. The influences of the chirp and initial phase of the excitation pulse on the harmonic spectra are discussed in terms of the semi-classical model including the propagation effects. The results indicate that the harmonic intensity and cutoff have strong dependence on the chirp of the laser pulse, but slightly on its initial phase. The high-order harmonics can be enhanced by the optimal laser pulse and its cutoff can be tuned by optimization of the chirp and initial phase of the laser pulse.     

Physics design for the C-ADS main linac based on two dif f erent injector design schemes

The China ADS（C-ADS） project proposes to build a 1000 MW Accelerator Driven sub-critical System around 2032. The accelerator will work in CW mode with 10 mA in beam current and 1.5 GeV in final beam energy. The linac is composed of two major sections： the injector section and the main linac section. There are two diferent schemes for the injector section. The Injector-scheme is based on a 325 MHz RFQ and superconducting spoke cavities of the same RF frequency and the Injector-scheme is based on a 162.5 MHz RFQ and superconducting HWR cavities of the same frequency. The main linac design will be diferent for diferent injector choices. The two diferent designs for the main linac have been studied according to the beam characteristics from the diferent injector schemes.     

Compressing ultrafast electron pulse by radio frequency cavity

An ultrafast electron diffraction technique with both high temporal and spatial resolution has been shown to be a powerful tool to observe the material transient structural change on an atomic scale.The space charge forces in a multi-electron bunch will greatly broaden the electron pulse width,and therefore limit the temporal resolution of the high brightness electron pulse.Here in this work,we design an ultrafast electron diffraction system,and utilize a radio frequency cavity to realize the ultrafast electron pulse compression.We experimentally demonstrate that the stretched electron pulse width of14.98 ps with an electron energy of 40 keV and the electron number of 1.0 ×10~5 can be maximally compressed to about0.61 ps for single-pulse measurement and 2.48 ps for multi-pulse measurement by using a 3.2-GHz radiofrequency cavity.We also theoretically and experimentally analyze the parameters influencing the electron pulse compression efficiency for single-and multi-pulse measurements by considering radiofrequency field time jitter,electron pulse time jitter and their relative time jitter.We suggest that increasing the electron energy or shortening the distance between the compression cavity and the streak cavity can further improve the electron pulse compression efficiency.These experimental and theoretical results are very helpful for designing the ultrafast electron diffraction experiment equipment and compressing the ultrafast electron pulse width in a future study.     

Physics design for the C-ADS main linac based on two different injector design schemes

The China ADS (C-ADS) project proposes to build a 1000 MW Accelerator Driven sub-critical System around 2032. The accelerator will work in CW mode with 10 mA in beam current and 1.5 GeV in final beam energy. The linac is composed of two major sections: the injector section and the main linac section. There are two different schemes for the injector section. The Injector-Ⅰ scheme is based on a 325 MHz RFQ and superconducting spoke cavities of the same RF frequency and the Injector-Ⅱ scheme is based on a 162.5 MHz RFQ and superconducting HWR cavities of the same frequency. The main linac design will be different for different injector choices. The two different designs for the main linac have been studied according to the beam characteristics from the different injector schemes.     

Effects of longitudinal parasitic modes on the beam dynamics for the ADS driving linac in China

For the accelerator driven subcritical system (ADS) main linac in China, two families of superconducting elliptical radio frequency (RF) cavities will be used to accelerate the proton beam from 180 MeV to 1.5 GeV. When the proton beam traverses in the RF cavity, the excited parasitic modes, like high order modes (HOMs) and same order modes (SOMs), may drive the beam to become unstable and increase the cryogenic load, thus putting a limitation on the normal operation of the accelerator. In this paper, by using a numerical code SMD based on the ROOT environment, the effects of longitudinal parasitic modes on the beam dynamics for the ADS driving linac in China have been investigated systematically, while parasitic modes which increase cryogenic loss have not been included in this paper. Some conclusions concerning the beam energy ranging from 180 MeV to 1.5 GeV have been obtained.     

Soliton-like pulse timing jitter in dispersion-managed systems

In this paper, the timing jitter in dispersion-managed soliton-like systems with the Gaussian pulse is studied by using two methods. Firstly, the derivation of the dynamic equations for the evolution of soliton-like parameters and the timing jitter expressions for the dispersion-managed soliton-like systems are carried out by the perturbed variational method. By analysing and simulating these timing jitter expressions, one can find that the timing jitter is induced by the amplified spontaneous emission noise and the frequency shift, etc. Nonlinear gain can suppress the timing jitter. The chirp sign and the filters action have also effects on the total timing jitter. Secondly, the timing jitter is calculated and analysed by using the moment method. The results of the two methods prove to be consistent with each other.     

Conceptional design of a heavy ion linac injector for HIRFL-CSRm

A room temperature heavy ion linac has been proposed as a new injector of the main Cooler Storage Ring(CSRm) at the Heavy Ion Research Facility in Lanzhou(HIRFL), which is expected to improve the performance of HIRFL. The linac injector can supply heavy ions with a maximum mass to charge ratio of 7 and an injection kinetic energy of 7.272 MeV/u for CSRm; the pulsed beam intensity is 3 emA with the duty factor of 3%. Compared with the present cyclotron injector, the Sector Focusing Cyclotron(SFC), the beam current from linac can be improved by 10–100 times. As the pre-accelerator of the linac, the 108.48 MHz 4-rod Radio Frequency Quadrupole(RFQ) accelerates the ion beam from 4 keV/u to 300 keV/u, which achieves the transmission efficiency of 95.3% with a 3.07 m long vane.The phase advance has been taken into account in the analysis of the error tolerance, and parametric resonances have been carefully avoided by adjusting the structure parameters. Kombinierte Null Grad Struktur Interdigital H-mode Drift Tube Linacs(KONUS IH-DTLs), which follow the RFQ, accelerate ions up to the energy of 7.272 MeV/u for CSRm. The resonance frequency is 108.48 MHz for the first two cavities and 216.96 MHz for the last 5 Drift Tube Linacs(DTLs). The maximum accelerating gradient can reach 4.95 MV/m in a DTL section with the length of17.066 m, and the total pulsed RF power is 2.8 MW. A new strategy, for the determination of resonance frequency,RFQ vane voltage and DTL effective accelerating voltage, is described in detail. The beam dynamics design of the linac will be presented in this paper.     

Numerical and experimental study on coherent beam combining of fibre amplifiers using simulated annealing algorithm

We present the numerical and experimental study on the coherent beam combining of fibre amplifiers by means of simulated annealing (SA) algorithm. The feasibility is validated by the Monte Carlo simulation of correcting static phase distortion using SA algorithm. The performance of SA algorithm under time-varying phase noise is numerically studied by dynamic simulation. It is revealed that the influence of phase noise on the performance of SA algorithm gets stronger with an increase in amplitude or frequency of phase noise; and the laser array that contains more lasers will be more affected from phase noise. The performance of SA algorithm for coherent beam combining is also compared with a widely used stochastic optimization algorithm, i.e., the stochastic parallel gradient descent (SPGD) algorithm. In a proof-of-concept experiment we demonstrate the coherent beam combining of two 1083~nm fibre amplifiers with a total output power of 12~W and 93% combining efficiency. The contrast of the far-field coherently combined beam profiles is calculated to be as high as 95%.     

Toward a fractal spectrum approach for neutron and gamma pulse shape discrimination

Accurately selecting neutron signals and discriminating 7 signals from a mixed radiation field is a key research issue in neutron detection.This paper proposes a fractal spectrum discrimination approach by means of different spectral characteristics of neutrons and 7 rays.Figure of merit and average discriminant error ratio are used together to evaluate the discrimination effccts.Different neutron and γ signals with various noise and pulse pile-up are simulated according to real data in the literature.The proposed approach is compared with the digital charge integration and pulse gradient methods.It is found that the fractal approach exhibits the best discrimination performance,followed by the digital charge integration method and the pulse gradient method,respectively.The fractal spectrum approach is not sensitive to high frequency noise;and pulse pile-up.This means that the proposed approach has superior performance for effective and efficient anti-noise and high discrimination in neutron detection.     

Enhanced fourth-power algorithm for phase estimation with frequency separation in direct-detection optical OFDM systems

The optical orthogonal frequency division multiplexing(OFDM) signal is affected by impairments introduced by electrical filters and optical chromatic dispersion.An enhanced fourth-power algorithm for phase estimation with frequency separation is used to estimate and compensate the phase rotation of OFDM subcarriers.The performance of the proposed phase estimation algorithm is evaluated on a 4-Gb/s OFDM signal at different frequencies.Experimental results using the proposed algorithm show a 1.8-dB received power sensitivity improvement at a bit error rate of 1×10-4 after a 100-km standard single-mode fiber transmission,compared with the conventional technique.     

RF phase jitter in a klystron amplifier

RF phase jitter is a very important parameter for a relativistic klystron amplifier. This parameter is closely linked with the physics processes in the klystron. RF phase jitter is theoretically studied together with Particle in Cell (PIC) simulations in the paper. The main factor is deduced and verified in the PIC simulation. RF phase jitter is significantly affected by the fluctuation of the beam voltage. The relation between the phase jitter and the voltage fluctuation is linear in certain ranges.     

Physical design of a 10 MeV LINAC for polymer radiation processing

In China, polymer radiation processing has become one of the most important processing industries. The radiation processing source may be an electron beam accelerator or a radioactive source. Physical design of an electron beam facility applied for radiation crosslinking is introduced in this paper because of it’s much higher dose rate and efficiency. Main part of this facility is a 10 MeV travelling wave electron linac with constant impedance accelerating structure. A start to end simulation concerning the linac is reported in this paper. The codes Opera-3d, Poisson-superfish and Parmela are used to describe electromagnetic elements of the accelerator and track particle distribution from the cathode to the end of the linac. After beam dynamic optimization, wave phase velocities in the structure have been chosen to be 0.56, 0.9 and 0.999 respectively. Physical parameters about the main elements such as DC electron gun, iris-loaded periodic structure, solenoids, etc, are presented. Simulation results proves that it can satisfy the industrial requirement. The linac is under construction. Some components have been finished. Measurements proved that they are in a good agreement with the design values.     

Study on application of independent component analysis in the CSNS/RCS

The China Spallation Neutron Source (CSNS) accelerators consist of a low energy H linac and a high energy proton Rapid Cycling Synchrotron (RCS). The proton beam is accumulated in the RCS and accelerated from 80MeV to 1.6GeV with a repetition of 25Hz. Independent component analysis (ICA) is a robust method for processing the collected data (samples) recorded by the turn-by-turn beam position monitor (BPM), which was recently applied to the accelerator. The samples are decomposed to source signals, or the so-called independent components, which correspond to the inherent motion of samples, such as betatron motion and synchrotron motion. A study on the application of the ICA method to CSNS/RCS has been made. It shows that the beta function, phase advance, and dispersion can be well reconstructed by using ICA in CSNS/RCS. The effects of BPM errors on the ICA results are also studied. By comparing the different solving methods in ICA, the so-called SOBI has more advantages for isolating the independent components on the application of ICA to CSNS/RCS. Beam emittance dilution in the process of exciting the turn-by-turn samples is considered,and thus an RF kicker is adopted to avoid such emittance growth.     

Analysis of ultra-broadband high-energy optical parametric chirped pulse amplifier based on YCOB crystal

A new type of optical parametric chirped pulse amplifier is designed and analyzed for the amplification of pulse centered at 808 nm.A novel crystal,yttrium calcium oxyborate YCa4O(BO3)3(YCOB),is utilized in the power amplification stage of optical parametric amplification(OPA).Noncollinear phase matching parameters in the xoz principle plane of YCOB,compared with those in BBO and DKDP,are analyzed by numerical simulation.The results show that YCOB rather than DKDP can be used in the power amplification stage of OPA to realize the amplification of chirped pulse to several joules with a gain bandwidth exceeding 100 nm.This can be used to gain a high intensity pulse of ～10 fs after the compressor.     

High contrast amplification at 1053 nm limited by pulse stretching-compressing process

We report on our high-contrast laser based on high-contrast,high-energy seed injection,low-gain optical parametric chirped pulse amplification(OPCPA),and Nd:glass amplifiers,which can be used as the high-contrast front end of a high-power Nd:glass chirped pulse amplification(CPA) laser system.The energy of the stretched1053 nm high-contrast seed pulse increases to 60 μJ by optimizing the frequency doubling crystal in the pulse cleaning device.After passing through a two-stage low-gain OPCPA,a 2-pass 2-rod Nd:glass amplifier,and a compressor the amplified pulse of 131 mJ∕282 fs is achieved.The third-order correlation scanning measurement shows that the pulse contrast in the tens of ps range is about 10~(-7)–10~(-8).With the high-contrast seed passing through the stretcher and compressor only,the contrast measurement indicates that the stretching-compressing process leads mainly to the contrast degradation of the amplified pulse.