电机驱动微装配在双光子制备微结构中的应用

对微结构的制作、微装配系统进行了研究. 采用飞秒激光双光子聚合微加工技术制作有底座、精细的三维立体“拱形”微结构, 其高250μm、长300μm、厚50μm. 将此微结构与实验室自主搭建的二维微装配平台相结合, 利用自主编程的人机交互界面驱动步进电机, 远程操控微装配设备; 将荧光闪烁陶瓷粉末装配到微结构中, 对装配后的微结构进行荧光光谱表征发现, 纯荧光粉末和微结构中的荧光粉末的发射光谱在测量误差范围内基本一致, 表明荧光粉末的光学性质未发生改变. 利用该装置可以将各类微纳米级材料和微结构进行装配, 形成含有不同材料的微结构系统.     

CCSD(T) study on the structures and chemical bonds of AnO molecules (An = Bk–Lr)

The molecular geometries and dissociation energies of AnO (An = Bk–Lr) molecules were first obtained at thecoupled-cluster single-, double-, and perturbative triple-excitations [CCSD(T)] level of theory. Four hybrid functionals,B3LYP, M06-2X, TPSSh, and PBE0, were also employed in the calculations for the sake of comparison. In comparison ofthe CCSD(T) results, B3LYP, TPSSh, and PBE0 functionals can obtain more appropriate results than M06-2X and MP2.The analyses on molecular orbitals show that the 7s, 6d, and 5f atomic orbitals of actinide (An) atoms participate in thebonding of An–O bonds. The partial covalent nature between An and O atoms is revealed by QTAIM analyses.     

射频等离子制备石墨烯负载Co3O4催化剂及其析氧性能研究

氢能的引入能有效提升配电网的供电可靠性,而电解水制氢是实现低碳转型的关键技术,开发高效的电解水催化剂势在必行。过渡金属氧化物储量大、催化活性高,是具有广阔应用前景的析氧反应催化剂。本文通过射频等离子体处理制备石墨烯上负载Co₃O₄析氧催化剂,XRD、Raman和XPS测试结果显示,二维结构石墨烯的引入加速表面电子迁移,增大了反应面积。等离子体处理促进了纳米粒子在石墨烯上的负载,利用等离子体刻蚀作用在催化剂表面制造出大量碳结构缺陷和氧空位结构,改善了活性位点分布,有效调控Co₃O₄电子结构,提高析氧催化活性。电化学测试表明,本文中合成的Co₃O₄@rGO在电流密度为50 mA·cm^-2时的过电位为410 mV,动力学反应速率较快,表现出优于商业IrO₂的析氧催化活性。     

吉林大学物理化学学科:笃学致远 润物无声

伴随建系而生的吉林大学物理化学学科是吉大化学学科的重要组成部分,在70年的发展中为整个化学学科的发展建设做出了重要贡献。吉大物化人一直坚持理论与实践并重的教育思想,培养了大批优秀人才。回顾了吉大物理化学学科的历史沿革,展现了吉林大学化学学院物理化学在课程和教材建设、科学研究和人才培养等方面所取得的成绩。在吉大化学70周年华诞之际,谨以此文向为吉大物化学科建设做出贡献的前辈致敬。     

旋转对爆炸成型杆式侵彻体毁伤威力的影响

为进一步提高周向多爆炸成型侵彻体战斗部的毁伤效能，结合数值模拟方法，设计了一种爆炸成型杆式侵彻体战斗部。基于复合装药的爆轰加载控制方式，使得药型罩成型为密实的杆式侵彻体，通过调整半预制药型罩的斜置角度，对毁伤元的旋转速度施加控制，进而提高其空中飞行姿态的稳定性，提高毁伤元的毁伤威力。对不同斜置角度的战斗部原理样机进行了静爆实验，实验结果与模拟结果的对比表明，半预制药型罩斜置角度为1.5°时，爆炸成型杆式侵彻体的着靶姿态最好，对45钢靶板侵彻深度最大。通过药型罩斜置，在保证杆式侵彻体成型质量的同时，可以有效提高侵彻体的侵彻威力。     

Experimental study on flow control of the turbulent boundary layer with micro-bubbles

The effect of micro-bubbles on the turbulent boundary layer in the channel flow with Reynolds numbers (Re) ranging from \(0.87\times 10 ^{5}\) to \(1.23\times 10^{5}\) is experimentally studied by using particle image velocimetry (PIV) measurements. The micro-bubbles are produced by water electrolysis. The velocity profiles, Reynolds stress and instantaneous structures of the boundary layer, with and without micro-bubbles, are measured and analyzed. The presence of micro-bubbles changes the streamwise mean velocity of the fluid and increases the wall shear stress. The results show that micro-bubbles have two effects, buoyancy and extrusion, which dominate the flow behavior of the mixed fluid in the turbulent boundary layer. The buoyancy effect leads to upward motion that drives the fluid motion in the same direction and, therefore, enhances the turbulence intense of the boundary layer. While for the extrusion effect, the presence of accumulated micro-bubbles pushes the flow structures in the turbulent boundary layer away from the near-wall region. The interaction between these two effects causes the vorticity structures and turbulence activity to be in the region far away from the wall. The buoyancy effect is dominant when the Re is relatively small, while the extrusion effect plays a more important role when Re rises.     

基于基金项目的“一带一路”研究格局与态势分析

以国家和有关部委的资助项目库为数据来源，检索2014-2016年“一带一路”的相关基金立项，运用文献计量和空间分析的方法从项目的负责人、科研单位、所属地域、学科、研究内容等多个角度进行解析，旨在揭示 “一带一路”研究的格局与态势.结果表明：（1）“一带一路”相关基金立项数目总体呈逐年上升趋势，增速平缓，国家社科基金主体地位明显.（2）项目所属单位、省份在空间上呈现集中分布趋势，体现了一定的区位优势、空间关联与地理邻近效应.（3）单个负责人的立项数目差异不大，分布较为平均.（4）“一带一路”、丝绸之路经济带、21世纪海上丝绸之路为目前学者主要的研究对象和议题.（5）各类基金高频词汇基本保持同步，五类基金研究的热门领域大体趋于一致，包括经济学、国际问题研究、民族问题研究和交叉学科研究等.最后，从研究数据、时间、空间及学科与合作前景上，对未来的研究趋势做了总结和展望.     

QEPAS系统中石英音叉模态仿真计算与研究

对石英音叉增强型光声光谱(QEPAS)系统中常用的石英音叉进行了有限元模态计算，获得石英音叉前6阶振型与模态频率，认知了第4阶对称摆动振型为有效振动，利用单因素法分析了石英音叉的音臂长度l₁、音臂宽度w₁、音臂厚度t、音臂切角θ、音臂圆孔直径d及音臂圆孔高度h对低阶有效共振频率(Fre)的影响，敏感度依次为： l₁> w₁>d>θ>t>h，考虑实际设计情形，筛选出了l₁，w₁，d与h四个石英音叉设计变量，采用Box-Behnken实验设计方案与RSM(response surface methodology)方法，以Fre为函数目标，建立l₁，w₁，d与h的二次回归响应面模型，得到了参数之间的交互作用，利用Design-Expert软件对响应面模型进行设计参数反求，结果表明，在15 000 Hz≤Fre≤25 000 Hz计算区域内误差较小，基本满足QEPAS系统的计算需求，所提出的研究与设计方法具有一定通用性，可为QEPAS系统中石英音叉结构参数设计提供参考。     

Spontaneously Regenerative Tough Hydrogels

Sponges, Neofibularia nolitangere, can regenerate spontaneously after being broken down into small pieces, and the regenerated structure maintains the original appearance and function. Synthetic materials with such capabilities are highly desired but hardly achieved. Presented here is a sponge‐inspired self‐regenerative powder from a double‐network (DN) tough hydrogel. Hydrogels are regenerated from their powder form, by addition of water, with preservation of the original appearance and mechanical properties. The powder‐hydrogel‐powder cycle can be repeated multiple times with little loss in mechanical properties, analogous to the regeneration of sponges. These DN hydrogels can be conveniently stored and easily shaped upon regeneration. This work may have implications in the development of regenerative materials for coatings and adhesives.