Micromagnetic simulation of Sm–Co/α-Fe/Sm–Co trilayers with various angles between easy axes and the film plane

Hysteresis loops and energy products have been calculated systematically by a three-dimensional(3D) software OOMMF for Sm–Co/α-Fe/Sm–Co trilayers with various thicknesses and β, where β is the angle between the easy axis and the field applied perpendicular to the film plane. It is found that trilayers with a perpendicular anisotropy possess considerably larger coercivities and smaller remanences and energy products compared with those with an in-plane anisotropy.Increase of β leads to a fast decrease of the maximum energy product as well as the drop of both remanence and coercivity. Such a drop is much faster than that in the single-phased hard material, which can explain the significant discrepancy between the experiment and the theoretical energy products. Some modeling techniques have been utilized with spin check procedures performed, which yield results in good agreement with the one-dimensional(1D) analytical and experimental data, justifying our calculations. Further, the calculated nucleation fields according to the 3D calculations are larger than those based on the 1D model, whereas the corresponding coercivity is smaller, leading to more square hysteresis loops and better agreement between experimental data and the theory.     

Computation of the locus crossing point location of MC circuit

In this paper, the crossing point property of the i-v hysteresis curve in a memristor-capacitor （MC） circuit is analyzed. First, the ideal passive memristor on the crossing point property of i-v hysteresis curve is studied. Based on the analysis, the analytical derivation with respect to the crossing point location of MC circuit is given. Then the example of MC with linear memristance-versus-charge state map is demonstrated to discuss the drift property of cross-point location, caused by the frequency and capacitance value.     

Effect of alumina thickness on Al_2O_3/InP interface with post deposition annealing in oxygen ambient

In this paper, the effect of alumina thickness on Al2O3/InP interface with post deposition annealing （PDA） in the oxygen ambient is studied. Atomic layer deposited （ALD） Al2O3 films with four different thickness values （5 nm, 7 nm, 9 nm, 11 rim） are deposited on InP substrates. The capacitance-voltage （C-V） measurement shows a negative correlation between the alumina thickness and the frequency dispersion. The X-ray photoelectronspectroscopy （XPS） data present significant growth of indium-phosphorus oxide near the Al2O3/InP interface, which indicates serious oxidation of InP during the oxygen annealing. The hysteresis curve shows an optimum thickness of 7 nm after PDA in an oxygen ambient at 500 ℃ for 10 min. It is demonstrated that both sides of the interface are impacted by oxygen during post deposition annealing. It is suggested that the final state of the interface is of reduced positively charged defects on Al2O3 side and oxidized InP, which degrades the interface.     

Transport properties and anomalous fatigue effect of Ag/Bi0.9La0.lFeO3/La0.7Sr0.3MnO3 heterostructures

The transport properties and fatigue effect of Ag/Bi0.9La0.lFeO3/La0.7Sr0.3MnO3 heterostructures are described. By examining the I-V curves, an anomalous fatigue effect was found and its influences on resistive states were studied. I-V curves combined with C-f spectra were used to directly analyze the transport properties and fatigue effect. Compared to the first I-V cycle state, this structure shows more than one order increase of resistance after 100 cycles of ＂I-V curve training＂. The redistribution of oxygen vacancies in the depletion layer of Ag/Bi0.9La0.lFeO3 is believed to be responsible for the different resistance mechanisms and tenfold magnitude drop in resistance. The resistive switching is understood to be caused by electric field-induced carrier trapping and detrapping, which changes the depletion layer thickness at the Ag/Bi0.9La0.lFeO3 interface.     

原位Raman光谱技术应用于铁电陶瓷畴变与电疲劳研究

基于铁电陶瓷材料90°畴变导致Raman光谱变化的原理,自行设计并搭建了铁电材料原位测试分析和数据采集系统,通过与Raman光谱仪的联用,利用特制的样品旋转装置,从实验上证实在外加电场作用下铁电材料中的90°畴变使平均电畴的择优取向发生改变,从而导致Raman光谱强度的变化,利用铁电材料原位测试分析和数据采集系统,实现...     

Damage monitor and life prediction of carbon fiber-reinforced ceramic-matrix composites at room and elevated temperatures using hysteresis dissipated energy-based damage parameter

In this paper, the damage monitor and life prediction of carbon fiber-reinforced ceramic-matrix composites (C/SiC CMCs) have been investigated using the hysteresis dissipated energy-based damage parameter. The evolution of the interface shear stress, hysteresis dissipated energy, hysteresis dissipated energy-based damage parameter and the broken fibers fraction vs. cycle number, the fatigue life S?N curves of unidirectional, cross-ply and 2.5D C/SiC composites at room temperature and 800 °C in air atmosphere have been analyzed. For unidirectional C/SiC, the hysteresis dissipated energy and hysteresis dissipated energy-based damage parameter first increase and then decrease with cycle number, and the fatigue limit stress decreases from 88% tensile strength at room temperature to 20% of the tensile strength at 800 °C in air atmosphere; for cross-ply C/SiC, the hysteresis dissipated energy and hysteresis dissipated energy-based damage parameter decrease with increasing applied cycles, and the fatigue limit stress decreases from 85% tensile strength at room temperature to 22% tensile strength at 800 °C in air; and for 2.5D C/SiC, the hysteresis dissipated energy and hysteresis dissipated energy-based damage parameter increases with cycle number, and the fatigue limit stress decreases from 70% tensile strength at room temperature to 25% tensile strength at 800 °C in air.     

Comparisons of interface shear stress degradation rate between C/SiC and SiC/SiC ceramic-matrix composites under cyclic fatigue loading at room and elevated temperatures

The interface shear stress in C/SiC and SiC/SiC ceramic-matrix composites with different fiber preforms, i.e. unidirectional, cross-ply, 2D woven, 2.5D woven, and 3D braided, under cyclic fatigue loading at room and elevated temperatures have been estimated. An effective coefficient of the fiber volume fraction along the loading direction was introduced to describe the fiber preforms. Based on fiber slipping mechanisms, the hysteresis loops models considering different interface slip cases have been developed. Using the experimental fatigue hysteresis dissipated energy, the interface shear stress degradation rates of C/SiC and SiC/SiC composites with different fiber preforms at room and elevated temperatures have been obtained and compared. It was found that the interface shear stress degradation rate is the highest for 3D braided SiC/SiC at 1300 °C in air, and the lowest for 2D woven C/SiC at room temperature under cyclic fatigue loading.     

Remarks on interpretations of the Eotvos experiment and misinterpretation of E=mc^2

The Eotvos experiment on the verification of equivalence between inertial mass and gravitational mass of a body is famous for its accuracy. A question is, however, can these experimental results be applied to the case of a physical space in general relativity, where the space coordinates could be arbitrary？ It is pointed out that it can be validly applied because it has been proven that Einstein＇s equivalence principle for a physical space must have a frame of reference with the Euclidean-like structure. Will claimed further that such an overall accuracy can be translated into an accuracy of the equivalence between inertial mass and each type of energy. It is shown that, according to general relativity, such a claim is incorrect. The root of this problem is due to an inadequate understanding of special relativity that produced the famous equation E=mc^2, which must be understood in terms of energy conservation. Concurrently, it is pointed out that this error is a problem in Will＇s book, ‘Theory and Experiment in Gravitational Physics＇.     

Status and accuracy of the Monte Carlo generators for luminosity measurements

The status and accuracy of the precision Monte Carlo generators used for luminosity measurements at flavour factories is reviewed. It is shown that, thanks to a considerable, long-term effort in tuned comparisons between the predictions of independent programs, as well as in the validation of the generators against the presently available calculations of the next-to-next-to-leading order QED corrections to Bhabha scattering, the theoretical accuracy reached by the most precise tools is of about one per mille. This error estimate is valid for realistic experimental cuts, appears to be quite robust and is already sufficient for very accurate luminosity measurements. However, recent progress and possible advances to further improve it are also discussed.     

Beam tail effect of a performance-enhanced EC-ITC RF gun

The beam tail effect of multi-bunches will influence the electron beam performance in a high intensity thermionic RF gun. Beam dynamic calculations that illustrate the working states of single beam tail and multi-pulse feed-in of a performance-enhanced EC-ITC （external cathode independent tunable cavity） RF gun for an FEL （free electron laser） injector are performed to estimate the extracted bunch properties. By using both Parmela and homemade MATLAB codes, the effects of a single beam tail as well as interactions of multi-pulses are analyzed, where a ring-based electron algorithm is adopted to calculated RF fields and the space-charge field. Furthermore, the procedure of unexpected deviated-energy particles mixed with an effective bunch head is described by the MATLAB code as well. As a result, the performance-enhanced EC-ITC RF gun is proved to have the capability to extract continual stable bunches suitable for a high requirement THz-FEL.     

溶胶-凝胶法制备Sr2Bi4Ti5O18薄膜及其铁电性能研究

采用溶胶-凝胶法,在氧气氛中和层层晶化的工艺条件下,成功地制备了沉积在Pt/Ti/SiO₂/Si(100)衬底上的铁电性能优良的Sr₂Bi₄Ti₅O₁₈ (SBTi)薄膜,并研究了SBTi薄膜的微结构、表面形貌、铁电性能和疲劳特性.研究表明：薄膜具有单一的层状钙钛矿结构，且为随机取向；薄膜表面光滑，无裂纹，厚度约为725nm；铁电性能测试显示较饱和、方形的电滞回线，当外电场强度为275kV/cm时 关键词： 溶胶-凝胶法 铁电薄膜 2Bi₄Ti₅O₁₈')" href="#">Sr₂Bi₄Ti₅O₁₈     

First-Principles Calculations of Atomic and Electronic Properties of T1 and In on Si（111）

The atomic and electronic structures of T1 and In on Si（111） surfaces are investigated using the firstprinciples total energy calculations. Total energy optimizations show that the energetically favored structure is 1/3 ML T1 adsorbed at the T4 sites on Si（111） surfaces. The adsorption energy difference of one T1 adatom between （√3 × √3） and （1 × 1） is less than that of each In adatom. The DOS indicates that TI 6p and Si 3p electrons play a very important role in the formation of the surface states. It is concluded that the bonding of TI adatoms on Si（111） surfaces is mainly polar covalent, which is weaker than that of In on Si（111）. So T1 atom is more easy to be migrated than In atom in the same external electric field and the structures of T1 on Si（111） is prone to switch between （√3 × √3） and （1 × 1）.     

Coordinated Control of Multi-Agent Systems with a Varying-Velocity Leader and Input Saturation

In this paper, we investigate a leader-following tracking problem for multi-agent systems with bounded inputs. We propose a distributed bounded protocol for each follower to track a leader whose states may not be completely measured. We theoretically prove that each agent can follow the leader with estimable track errors. Finally, some numerical simulations are presented to illustrate our theoretical results.     

Ca掺杂对YBa2Fe3O8＋w体系晶体结构的影响

本文对YBFO体系掺杂Ca,获得（Y1-xCax）Ba2Fe3O8＋w（YCBFO,x=0,0.05,0.10,0.20）相,通过X射线粉末衍射、扫描电子显微镜等方法,研究YBFO体系内掺入Ca之后,对YBFO的晶体结构、晶胞参数等方面的影响.研究结果表明：对YBFO体系内掺Ca,Ca进入Y位,是空穴型掺杂,这种掺杂并...     

Entropy of Quantum Dynamical Systems and Sufficient Families in Orthomodular Lattices with Bayessian State

The purpose of the present paper is to study the entropy hs（Ф） of a quantum dynamical systems Ф = （ L, s, Ф）, where s is a bayessian state on an orthomodular lattice L. Having introduced the notion of entropy hs（ Ф, A） of partition A of a Boolean algebra B with respect to a state s and a state preserving homomorphism Ф, we prove a few results on that, define the entropy of a dynamical system hs（Ф）, and show its invariance. The concept of sufficient families is also given and we establish that hs （Ф） comes out to be equal to the supremum of hs （Ф,A）, where A varies over any sufficient family. The present theory has then been extended to the quantum dynamical system （ L, s, Ф）, which as an effect of the theory of commutators and Bell inequalities can equivalently be replaced by the dynamical system （B, s0, Ф）, where B is a Boolean algebra and so is a state on B.     

Design and construction progress of BRIF

A new RIB project, the Beijing Radioactive Ion-beam Facility （BRIF）, has been running at CIAE since 2004. In this project, a 100 MeV H-cyclotron, CYCIAE-100, is selected as the driving accelerator providing a 75-100 MeV, 200-500 μA proton beam. An ISOL system employs two stage separators to reach the mass resolution of 20000. Its RIB beam will be injected into the existing Tandem and a superconducting booster installed down stream of the Tandem will increase the energy by 2 MeV/q. The progress of BRIF, giving special emphasis to CYCIAE-100, will be introduced in this paper.     

Study on the pre-chopper in CSNS LEBT

Physical designing of the pre-chopper in CSNS LEBT is carried out, which includes the deflecting voltage, the length and the width of the deflecting plates, and the gap between the deflecting plates. The most outstanding feature of the design is that both the gap and the width vary with the beam envelope size. So both the requried deflecting voltage and the loaded capacitance are lowered. In order to avoid destruction of the space charge neutralization by the pre-chopper in the whole LEBT, an electron-trapping electrode is arranged to confine the electrostatic field of the pre-chopper to the local area. To examine the reliability of the pre-chopping design in CSNS LEBT, a similar pre-chopping design in ADS RFQ LEBT is set up and an experiment on the pre-chopper is prepared. 3-dimensional simulations are carried out to determine the loaded capacitance and the applied voltage of the electron-trapping electrode.     

Synchronization in a Mutualism Ecosystem Induced by Noise Correlation

Understanding the cause of the synchronization of population evolution is an important issue for ecological improvement. Here we present a Lotka-Volterra-type model driven by two correlated environmental noises and show, via theoretical analysis and direct simulation, that noise correlation can induce a synchronization of the mutualists. The time series of mutual species exhibit a chaotic-like fluctuation, which is independent of the noise correlation, however, the chaotic fluctuation of mutual species ratio decreases with the noise correlation. A quantitative parameter defined for characterizing chaotic fluctuation provides a good approach to measure when the complete synchronization happens.     

Metric of States

Metric of quantum states plays an important role in quantum information theory. In this letter, we find the deep connection between quantum logic theory and quantum information theory. Using the method of quantum logic, we can get a famous inequality in quantum information theory, and we answer a question raised by S. Gudder.     

Measurements of the γγ＊ → π^0 and γγ＊ → ηc transition form factors at BABAR

We present measurements of the γγ＊ → π^0 transition form factor for the momentum transfer range Q^2=4-40 GeV^2 and the γγ＊ → ηc transition form factor for the range Q^2=2-50 GeV^2. The current status of measurements of the meson-photon transition form factors for the η and η＇ mesons is discussed. The results of the measurement of the ηc mass, total and two-photon widths are also presented.