散裂中子源漂移管直线加速器功率耦合器的冷测及分析(英)

功率耦合器是中国散裂中子源(CSNS)漂移管直线段(DTL)的关键部件之一,其耦合系数通常通过调节耦合孔尺寸得到,为了确保耦合系数达到设计值,制造了一个冷模进行耦合度的调节。在冷模测量过程中,发现了仅通过改变耦合孔尺寸耦合系数达不到目标值的问题,因此提出了一种与测量结果对比有良好仿真精度的新模型用于分析,并使用该仿真模型分析了PEFP使用的理论及影响耦合度的主要参数。最终耦合度被调节至目标值,正式件的冷测结果也表明其与仿真结果基本相同。     

Study on the pre-chopper in CSNS LEBT

Physical designing of the pre-chopper in CSNS LEBT is carried out, which includes the deflecting voltage, the length and the width of the deflecting plates, and the gap between the deflecting plates. The most outstanding feature of the design is that both the gap and the width vary with the beam envelope size. So both the requried deflecting voltage and the loaded capacitance are lowered. In order to avoid destruction of the space charge neutralization by the pre-chopper in the whole LEBT, an electron-trapping electrode is arranged to confine the electrostatic field of the pre-chopper to the local area. To examine the reliability of the pre-chopping design in CSNS LEBT, a similar pre-chopping design in ADS RFQ LEBT is set up and an experiment on the pre-chopper is prepared. 3-dimensional simulations are carried out to determine the loaded capacitance and the applied voltage of the electron-trapping electrode.     

Design of a multi-cusp ion source for proton therapy

The permanent magnets of the discharge chamber in a multi-cusp proton source are studied and designed. The three electrode extraction system is adopted and simulated. A method to extract different amounts of current while keeping the beam emittance unchanged is proposed.     

漂移管直线加速器高功率波导窗的物理设计

为了研发中国散裂中子源(CSNS)漂移管直线加速器(DTL)的功率耦合器,在对常规波导窗结构进行改进的基础上,设计了一种新型高功率波导窗。利用微波仿真软件CST优化了波导窗的高频传输特性,并采用ANSYS分析了波导窗在通功率时的温升及热应力以防止陶瓷片破裂,结果表明,波导窗能传输的最大平均功率达到了800 kW。校核了波导窗抽真空时的机械强度,并对陶瓷窗高频打火进行初步讨论,结果表明,漂移管直线加速器入腔功率为2 MW,小于波导窗的临界输入功率2.355 MW,窗内打火的机率很小。     

Preliminary study on the RF tuning of CSNS DTL

In the RD of the CSNS Drift Tube Linac(DTL),the first unit tank with 28 drift tubes has been developed.The axial accelerating field is ramped from 2.2 MV/m to 3.1 MV/m in this tank.The required field flatness is less than±2%with the standard deviation of 1%for the beam dynamics;the field stability should be less than 1%for machine stable operation.After successful alignment,RF tuning was carried out focusing on the field profile measurement.Four slug tuners and eleven post couplers were applied in this procedure.The ramped field and required stability had been achieved by fine adjustment of the slug tuners and post couplers.In this paper,the preliminary tuning results are presented and discussed.     

基于新型安全架构的HEPS插入件安全控制系统

高能同步辐射光源（HEPS）插入件控制系统的主要功能是实现插入件磁间隙的开合运动控制。插入件控制系统的安全运动对插入件、储存环和光束线站的设备和人员安全至关重要。针对HEPS插入件控制系统的安全需求,研究了工业安全设计的标准和规范,在国内外同类型插入件控制系统中首次设计和实现了基于新型安全架构的安全系统。安全系统的设计和实施符合国际安全标准,并达到了安全完整性三级的高安全等级。该系统已成功应用在HEPS测试束线低温波荡器中,并完成了系统性的测试。测试结果表明,HEPS插入件安全系统实现了所有预期的安全指标,达到了高安全等级工业控制系统的标准。