Effect of high temperature band gap of GaN annealing on strain and nanoparticles

<正>Black-coloured GaN nanoparticles with an average grain size of 50 nm have been obtained by annealing GaN nanoparticles under flowing nitrogen at 1200℃for 30 min.XRD measurement result indicates an increase in the lattice parameter of the GaN nanoparticles annealed at 1200℃,and HRTEM image shows that the increase cannot be ascribed to other ions in the interstitial positions.If the as-synthesised GaN nanoparticles at 950℃are regarded as standard,the thermal expansion changes nonlinearly with temperature and is anisotropic;the expansion below 1000℃is smaller than that above 1000℃.This study provides an experimental demonstration for selecting the proper annealing temperature of GaN.In addition,a large blueshift in optical bandgap of the annealed GaN nanoparticles at 1200℃is observed,which can be ascribed to the dominant transitions from the C（Γ₇） with the peak energy at 3.532 eV.     

Bipolar resistive switching in BiFe_(0.95)Zn_(0.05)O_3 films

Bipolar resistive switching is studied in BiFe0.95Zn0.05O3 films prepared by pulsed laser deposition on （001） SrTiO3 substrate, with LaNiO3 as the bottom electrode, and Pt as the top electrode. Multiple steps of resistance change are ob- served in the resistive switching process with a slow voltage sweep, indicating the formation/rupture of multiple conductive filaments. A resistive ratio of the high resistance state （HRS） to the low resistance state （LRS） of over three orders of mag- nitude is observed. Furthermore, the conduction mechanism is confirmed to be space-charge-limited conduction with the Schottky emission at the interface with the top Pt electrodes in the HRS, and Ohmic in the LRS. Impedance spectroscopy demonstrates a conductive ferroelectric/interfacial dielectric 2-layer structure, and the formation/rupture of the conductive filaments mainly occurs at the interfacial dielectric layer close to the top Pt electrodes.     

Effect of high temperature annealing on strain and band gap of GaN nanoparticles

Black-coloured GaN nanoparticles with an average grain size of 50 nm have been obtained by annealing GaN nanoparticles under flowing nitrogen at 1200 oC for 30 min. XRD measurement result indicates an increase in the lattice parameter of the GaN nanoparticles annealed at 1200 oC, and HRTEM image shows that the increase cannot be ascribed to other ions in the interstitial positions. If the as-synthesised GaN nanoparticles at 950 oC are regarded as standard, the thermal expansion changes nonlinearly with temperature and is anisotropic; the expansion below 1000oC is smaller than that above 1000 oC. This study provides an experimental demonstration for selecting the proper annealing temperature of GaN. In addition, a large blueshift in optical bandgap of the annealed GaN nanoparticles at 1200 oC is observed, which can be ascribed to the dominant transitions from the C(Γ₇) with the peak energy at 3.532 eV.     

铂纳米晶合成中二价前驱体的还原动力学研究

In this letter, we report a quantitative analysis of how a Pt(Ⅱ) precursor is reduced to atoms at different temperatures for the formation of Pt nanocrystals with different morphologies and sizes. Our results suggest that in the early stage of a synthesis, the Pt(Ⅱ) precursor is reduced to atoms exclusively in the solution phase, followed by homogeneous nucleation to generate nuclei and then seeds. At a relatively low reaction temperature such as 22℃, the growth of the seeds is dominated by autocatalytic surface reduction that involves the adsorption and then reduction of the Pt(Ⅱ) precursor on the surface of the just-formed seeds. This particular growth pathway results in relatively large assemblies of Pt nanocrystals. When the reaction temperature is increased to 100℃, the dominant reduction pathway will be switched from surface to solution phase, producing much smaller assemblies of Pt nanocrystals. Our results also demonstrate that a similar trend applies to the seed-mediated growth of Pt nanocrystals in the presence of Pd nanocubes.     

Temperature Dependence of Luminescence of CdS：Mn/ZnS Core-Shell Quantum Dots

Luminescence intensity of CdS：Mn/ZnS core-shell quantum dots （QDs） can be strongly enhanced in comparison with bulk CdS：Mn and nanoparticles, while the luminescence due to the surface state is greatly suppressed by a capping ZnS shell We find that with the increasing temperature, the peak position of CdS：Mn/ZnS core-shell QDs blue shifts due to the reduction of phonon coupling. Unlike the bulk CdS：Mn, the luminescence of the core-shell QDs is less sensitive to thermal quenching.     

Reduced-temperature ordering of FePt nanoparticle assembled films by Fe30Pt70/Fe3O4 core/shell structure

In this paper, Fe30Pt70/Fe3O4 core/shell nanoparticles were synthesized by chemical routine and the layered polyethylenimine （PEI）-Fe30Pt70/Fe3O4 structure was constructed by molecule-mediated self-assembly technique. The dimension of core/shell structured nanoparticles was that of 4nm core and 2 nm shell. After annealing under a flow of forming gas （50%Ar2＋30%H2） for 1 h at or above 400℃, the iron oxide shell was reduced to Fe and diffused to Pt-rieh core, which leaded to the formation of L1. phase FePt at low temperature. The x-ray diffraction results and magnetic properties measurement showed that the chemical ordering temperature of Fe30Pt70/Fe3O4 core/shell nanoparticles assembly can be reduced to as low as 400℃. The sample annealed at 400℃ showed the eoereivity of 4KOe with the applied field of 1.5T. The core/shell structure was suggested to be an effective way to reduce the ordering temperature obviously.[第一段]     

Photoluminescence and thermoluminescence properties of SnO2 nanoparticles embedded in Li20-K20-B203 with Cu-doping

Cu-doped borate glass co-doped with SnO2 nanoparticles is fabricated by melt quenching. The structure and morphology of the samples are examined by X-ray diffraction and field emission scanning electron microscopy. Up-conversion enhancement is observed in the photoluminescence （PL） and thermolumines- cence （TL） intensities of the glass. PL emission spectra are identified in the blue and green regions, and a fourfold increase in emission intensity may be observed in the presence of embedded SnO2 nanoparticles. The glow curve is recorded at 215℃, and fourfold increases in TL intensity are obtained by addition of 0.1 mol% SnO2 nanoparticles to the glass. Higher TL responses of the samples are observed in the energy range of 15-100 KeV. At energy levels greater than -0.1 MeV, however, flat responses are obtained. The activation energy and frequency factor of the second-order kinetic reaction are calculated by the peak shape method.     

Knockout reaction induced by ~6 He at 61.2 MeV/u

A knockout reaction induced by ⁶He at 61.2 MeV/u was carried out at the HIRFL-RIBLL radioactive beam line. The α core fragments at forward angles were detected in coincidence with the recoiled protons at large angles. From this coincident measurement the valence nucleon knockout mechanism and the core knockout mechanism can be separated according to the polar angle correlation between the core fragments and the recoiled protons. It is demonstrated that, when reconstructing the resonant state of a weakly bound nucleus, the contamination resulting from the core knockout mechanism should be eliminated in order to obtain the correct structure information.     

Structure, dielectric and magnetodielectric properties of Bi1-xGdxFeO3 Ceramics

Different magnetodielectric effects were observed in Bi1-xGdxFeO3 ceramics depending on gadolinium content. A positive one was observed in the samples with x ≤0.10 at 295K and 16K, and a negative one in the sample with x = 0.4 at 16 K. Structure analysis by x-ray diffraction (XRD) reveals that the samples crystallize in the R3c structure (ferroelectrics) for x<0.08 and in the Pbnm structure (paraelectrics) for x≥0.3 at room temperature. Temperature-dependent dielectric response and x-ray diffraction confirm the occurrence of a structural transition in the Pbnm phase at low temperature for the samples with x ≤0.4. While the positive magnetodielectric effects can be attributed to a coupling of magnetic and crystallographic structures of the R3c phase, the observed negative magnetodielectric effect in the Pbnm phase can be associated with a low-temperature modification of the Pbnm structure. The observed dualsigned magnetodielectric effects suggest that the Bi1-xGdxFeO3 oxides are a good prototype for understanding the magnetodielectric coupling mechanism in this kind of materials.     

Optical switching based on the manipulation of microparticles in a colloidal liquid using strong scattering force

This paper demonstrates the realization of an optical switch by optically manipulating a large number of polystyrene spheres contained in a capillary.The strong scattering force exerted on polystyrene spheres with a large diameter of 4.3 μm is employed to realize the switching operation.A transparent window is opened for the signal light when the polystyrene spheres originally located at the beam centre are driven out of the beam region by the strong scattering force induced by the control light.The switching dynamics under different incident powers is investigated and compared with that observed in the optical switch based on the formation of optical matter.It is found that a large extinction ratio of ～ 30 dB and fast switching-on and switching-off times can be achieved in this type of switch.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.