一类带有给定切线多边形的样条曲线

利用带有形状参数的基函数,构造与给定切线多边形相切的样条曲线,所构造的曲线是C2和C3连续的,且对切线多边形是保形的.曲线上的所有控制点可由多边形顶点直接计算产生,曲线具有局部修改性.最后,以实例说明算法是有效的.     

带有给定切线多边形的有理二次贝齐尔样条曲线

本讨论与给定切线多边形相切的分段有理二次贝齐尔曲线，所构造的曲线在一定的条件下可达到C^1连续，且对切线多边形是保形的；所有有理二次贝齐尔曲线段的控制点由切线多边形的顶点直接计算产生．最后以实例表明，本的方法是有效的．     

两类新的广义Ball曲线曲面的求值算法及其应用

本文研究两类新的广义Ball曲线曲面的求值算法及其应用.其一是把Bezier曲线曲面的求值转换到这两类曲线曲面的求值,大大加快了计算速度.其二是给出Bezier曲线与这两类广义Ball曲线的统一表示,并利用这种表示给出它们之间相互转换的递归算法.     

广义Ball曲线的性质及其应用

本文讨论了任意次数的广义Ball曲线的性质和它们的应用,如一般的升阶公式,Bézier曲线与广义Ball曲线之间的转换,极限定理,对偶基,广义Ball基函数下的Marsden恒等式,降阶赋值算法,单位分解性质等.     

四次带参Ball曲线的形状分析

基于包络理论与拓扑映射的方法对四次带参Ball曲线进行了形状分析,得出了曲线上含有奇点,拐点和曲线为局部凸或全局凸的充分必要条件,这些条件完全由控制多边形和形状参数所决定;并进一步讨论了形状参数对形状分布图的影响及其对曲线形状的调节能力.研究表明,四次带参Ball曲线的形状调控能力要优于四次带参Bezier曲线.     

一种构造三次PH曲线的几何方法

通过给出始末两点以及对应的切线与弦线,利用三次PH曲线控制多边形的边与角之间的几何关系,通过加入辅助线,用几何方法求出控制多边形的弦长,从而构造出满足初始条件的控制多边形.在此基础上求出满足条件的三次PH曲线,并给出了数值实例.     

带有给定凸切线多边形的保形五次样条逼近

本讨论带有给定切线多边形的保形逼近问题．给出了一条与给定切线多边形相切的保形五次参数祥条曲线。     

Ball基函数的对偶基及其应用

1．引言对于平面或空间上给定的n＋1个点vo，yi，…，v。，熟知的n次Bezier曲线定义为称为n次BernsteiN基函数，vo，yi，…；vn为Bezier曲线的控制点．在Ball开发的英国飞机公司Consurf外形设计系统中，他首先给出了三次Ball基函数的定义l‘，‘］．后来，Goodman和Said定义了［0，1］上Zm＋1次Ball基函数［5］一类似于B6zier曲线，称为［0，1］上关于控制点10，yi，…，vZ。＋1的B。11曲线·类似于B6zier曲线，Ball曲线也具有变差缩减、保凸等良好性质［3］，故在几何外形设计中也有着广泛的应用．熟知的B6zier曲线可由deCasteljan…     

与给定多边形相切的C2和C3 广义 Ball闭曲线

B样条曲线和Bezier曲线在CAD、CAGD及逼近中非常有用,例如,在服装CAD纸样的设计过程中,通常先根据尺寸要求确定控制点,再根据控制点用直线段绘制样片的大体轮廓,即绘制多边形,在多边形内用直线和曲线绘制封闭的图形,由于样片的形状不规则,即构成样片的曲线比较复杂,为了使曲线光滑、丰满、有弹性,经常遇到曲线与控制多边形相切     

一类C^3—连续的B—型样条曲线及其插值与逼近性

本文提出一类Ｃ３－连续的带有因子的Ｂ－型参数样条曲线,它的每一段只要四个 控制点就能生成,可用它直接插值或逼近于任意控制点或对控制边多边形作局部或整体逼 近。利用因子间的某些关系可将其次数降到最低．与普通的四次Ｂ－样条曲线相比,这类 曲线更加方便灵活。     

A sinusoidal polynomial spline and its Bezier blended interpolant

Functional polynomials composed of sinusoidal functions are introduced as basis functions to construct an interpolatory spline. An interpolant constructed in this way does not require solving a system of linear equations as many approaches do. However there are vanishing tangent vectors at the interpolating points. By blending with a Bezier curve using the data points as the control points, the blended curve is a proper smooth interpolant. The blending factor has the effect similar to the “tension” control of tension splines. Piecewise interpolants can be constructed in an analogous way as a connection of Bezier curve segments to achieve C¹ continuity at the connecting points. Smooth interpolating surface patches can also be defined by blending sinusoidal polynomial tensor surfaces and Bezier tensor surfaces. The interpolant can very efficiently be evaluated by tabulating the sinusoidal function.     

Dual Bases for a New Family of Generalized Ball Bases

This paper presents the dual bases for a new family of generalized Ball curves with a position parameter K, which includes the Bezier curve, generalized Said-Ball curve and some intermediate curves. Using the dual bases, the relative Marsden identity, conversion formulas of bases and control points of various curves are obtained.     

与给定多边形相切的一类含参数三角样条曲线

基于一类与给定多边形相切的三角样条曲线,通过在基函数中引入形状参数λ,在保持原曲线的光滑性及其他基本性质不变的条件下,构造出一类能自由调控曲线形态的含参数三角样条曲线,并结合图例讨论了其相关性质.     

一类新的细分曲线方法

Subdivision defines a smooth curve or surface as the limit of a sequence of successive refinements based on initial control polygon or grid.Usually the curve refinements is the basis of the corresponding surface rules. In this paper we analyze previous subdivision scheme according to theories about convergence of N.Dyn and M.F Hassan. In terms of binary and ternary subdivision schemes general construction about curve‘s refinements are studied.Two approximating curve subdivision schemes with neighboring four control points are derived,the generating limit curves can both reach the smoothness of C^1 over the initial polygon using the two schemes and the tolerances of them are given according to the method of [7].     

A modified Schwarz–Christoffel mapping for regions with piecewise smooth boundaries

A method where polygon corners in Schwarz–Christoffel mappings are rounded, is used to construct mappings from the upper half-plane to regions bounded by arbitrary piecewise smooth curves. From a given curve, a polygon is constructed by taking tangents to the curve in a number of carefully chosen so-called tangent points. The Schwarz–Christoffel mapping for that polygon is then constructed and modified to round the corners.