[Cu_2(Gly-GlyO)_2(4,4′-bpy)(OH)_2]·10H_2O配合物的合成、晶体结构和分子结构研究

合成了以４，４′－ｂｐｙ为中继基、Ｇｌｙ－ＧｌｙＯ为螯环的新型双核铜配合物．经Ｘ射线单晶结构分析确定该配位化合物晶体的化学式为［（Ｈ２ＮＣＨ２ＣＯＮＨＣＨ２ＣＯＯ）Ｃｕ（ＯＨ）（Ｃ１０Ｈ８Ｎ２）Ｃｕ（ＯＨ）－（Ｈ２ＮＣＨ２ＣＯＮＨＣＨ２ＣＯＯ）］·１０Ｈ２Ｏ．晶体属三斜晶系，Ｐ１空间群，晶胞参数ａ＝０．７１２４（２）ｎｍ，ｂ＝１．１４０５（１０）ｎｍ，ｃ＝１．１４３４（１０）ｎｍ，α＝６７．５５°，β＝７９．０２°，γ＝７７．９７°，Ｖ＝０．８３４（３）ｎｍ３，Ｚ＝１．最终一致性因子Ｒ为０．０７２７．     

［Cu_2（Gly－GlyO）_2（4，4＇－bpy）（OH）_2］·9H_2O

将Ｇｌｙ－ＧｌｙＯ、４，４＇－联吡啶与Ｃｕ（ＮＯ_３）_２·Ｈ_２Ｏ在二次水溶液中反应，合成出以４，４＇－ｂｐｙ为中继基、Ｃｌｙ－ＧｌｙＯ为螯环的新型双核铜配合物，经Ｘ射线单晶结构分析确定该配合物晶体的化学结构式为［（Ｈ_２ＮＣＨ_２ＣＯＮＨＣＨ_２ＣＯＯ）Ｃｕ（ＯＨ）（Ｃ_（１０）Ｈ_８Ｎ_２）Ｃｕ（ＯＮ）（Ｈ_２ＮＣＨ_２ＣＯＮＨＣＨ_２ＣＯＯ）］·９Ｈ_２Ｏ．晶体属Ｐ　空间群，晶胞参数ａ＝１．１４１２ｎｍ，ｂ＝１．２２９８ｎｍ，ｃ＝１．４２６９ｎｍ，α＝１１３．８２°，β＝１０１．９１°，γ＝１０３．６４°，Ｚ＝２．最终一致性因子Ｒ值为０．０６８，Ｒ_ｗ值为０．０５７，标准偏差σ＝０．１９５１。     

具有不同类型桥基的双核Cu(Ⅱ)-Schiff碱配合物的合成和晶体结构

合成了３个分别以Ｃ２Ｏ２－４（［Ｃｕ２（Ｌ１）２（ｏｘ）］，１），ＡｃＯ－（［Ｃｕ２（ＡｃＯ）（Ｌ２）２］ＢＦ４，２）和酚氧（［Ｃｕ２（Ｌ３）２］（ＣｌＯ４）２，３）为桥基的双核铜配合物，并测定了１的复配合物［Ｃｕ２（Ｌ１）２（ｏｘ）］·［Ｆｅ（ＯＨ）２（Ｈ２Ｏ）４］ＣｌＯ４·Ｈ２Ｏ（１′）及２和３的晶体结构．Ｘ射线衍射结果表明：１′，２和３分别属于Ｆｄｄｄ，Ｐ２１／ｃ和Ｐ２１／ｃ空间群．晶胞参数：［Ｃｕ２（Ｌ１）２（ｏｘ）］［Ｆｅ（ＯＨ）２（Ｈ２Ｏ）４］ＣｌＯ４·Ｈ２Ｏ，ａ＝２．４３９０（４）ｎｍ，ｂ＝３．０５３８（６）ｎｍ，ｃ＝１．８４９４（６）ｎｍ，α＝β＝γ＝９０．００°；２，ａ＝０．８４７（１）ｎｍ，ｂ＝２．６５４２（８）ｎｍ，ｃ＝１．４１００（６）ｎｍ，β＝９１．３４（６）°；３，ａ＝０．７６４６（３）ｎｍ，ｂ＝１．６９８３（３）ｎｍ，ｃ＝２．４４１７（３）ｎｍ，β＝９７．１１°     

（Cu（C14H11O3）（C10H8N2）2NO3.C2H5OH的合成,晶体结构和红外光谱

合成了（Ｃｕ（Ｃ１４Ｈ１１ｏ３）（Ｃ１０Ｈ８Ｎ２）ＮＯ３．Ｃ２Ｈ５ＯＨ化合物并测定其晶体结构，晶体属Ｐ空间群，ａ＝１．１９１１（２）ｎｍ，ｂ＝１．５３２２（２）ｎｍ，ｃ＝１．０４９２（２）ｎｍ，ａ＝１０８．９８（１）°β＝１０７．０４（１）°，γ＝７０．２５（１）°Ｚ＝２．在（Ｃｕ（Ｃ１４Ｈ１１Ｏ３）（Ｃ１０Ｈ８Ｎ２）２）配合阳离子中，２个２．２’－联吡啶的４个氮原子和二苯羟乙酸的１个羟基氧原子位     

钕钇异核谷氨酸配合物的合成及晶体结构

在水溶液中合成发钕钇异核谷氨酸配合物［（Ｎｄ４／３Ｙ２／３（Ｇｌｕ）２（Ｈ２Ｏ）８）４］（ＣｌＯ４）１６．１０Ｈ２Ｏ的单晶，并测定其结构。晶体属单斜晶系，Ｐ２１空间群，晶胞参数：ａ＝１．１０３７（５）ｎｍ，ｂ＝１．６７１０（５）ｎｍ，ｃ＝２．００８６（１０）ｎｍ，β＝１０２．８０（４）°，Ｖ＝３．６１２（３）ｎｍ＾３，Ｚ＝１，Ｄｃ＝２．０７９ｇ／ｃｍ＾３。最终偏差因子Ｒ＝０．０５８。钕和钇对中心位     

［Cu_2（C_6H_5COO）_4（C_3H_4N_2S）_2］的合成、晶体结

在２－氨基噻唑存在下，利用铜粉和过氧化苯甲酰的氧比加成反应，在丙酮中合成了双核铜（Ⅱ）配合物［Ｃｕ_２（Ｃ_６Ｈ_５ＣＯＯ）_４（Ｃ_３Ｈ_４Ｎ_２Ｓ）２］．晶体属单斜晶系，Ｐ２１／ｎ空间群，晶胞参数：ａ＝１．０６８５（１）ｎｍ，ｂ＝１．９０２８（６）ｎｍ，ｃ＝１．７０４６（９）ｎｍ；α＝γ＝９０°，β＝９６．４９（３）°，Ｖ＝３．４４３（４）ｎｍ~３，Ｚ＝４．Ｆ（０００）＝８２４，Ｄｃ＝１．５５５８ｇ／ｃｍ~３，μ＝１４．０７８ｃｍ~（－１），最终偏离因子Ｒ＝０．０４８２１，Ｒｗ＝０．０５３１４．通过元素分析、ＩＲ、ＴＧ、Ｘ射线粉末衍射表征了配合物的结构．     

三羰基环戊二烯基钼负离子与1，3－二卤丙烷的反应

三羰基环戊二烯基钼负离子与１，３－二卤丙烷在一缩二乙二醇二甲醚介质中反应，生成环卡宾配合物ＣｐＭｏＸ（ＣＯ）＿２ＣＯ（ＣＨ＿２）＿２ＣＨ２（Ｘ＝Ｂｒ，Ｉ）．硅桥连双环戊二烯基三羰基钼负离子与１，３－二卤丙烷顺利地进行类似反应，生成相应的硅桥连双［环卡宾钼配合物］──Ｅ［Ｃ＿５Ｈ＿４ＭｏＸ（ＣＯ）＿２］ＣＯ（ＣＨ＿２）＿２ＣＨ＿２］＿２（Ｅ＝Ｍｅ＿２Ｓｉ，Ｍｅ２ＳｉＳｉＭｅ＿２，Ｍｅ２ＳｉＯＳｉＭｅ＿２）．化合物硅氧硅桥联二茂二钼环卡宾配合物１１的晶体结构经Ｘ射线衍射测定，晶体属三斜晶系，Ｐ１空间群，晶体学数据：ａ＝０．８１８８（１）ｎｍ，ｂ＝１．０４５（３）ｎｍ，ｃ＝２．３２５２（４）ｎｍ，α＝９４．１４（２）°，β＝９４．０９（１）°，γ＝１０２．４８（２）°，Ｖ＝１．９３０６ｎｍ￣３，Ｚ＝２，Ｄ＿ｃ＝１．８５４ｇ／ｃｍ￣３。     

［（n－C_4H_9）_4N］_2［（OC_（14）H_8O）_2Mo_4O_（10）（OCH_3）_2］的合成和晶体结构

为探讨钼多酸根阴离子在有机化学反应中的催化机理，用菲醌作底物合成了［（ｎ－Ｃ_４Ｈ_９）_４Ｎ］_２［（ＯＣ_（１４）Ｈ_８Ｏ）_２Ｍｏ_４Ｏ（１０）（ＯＣＨ_３）_２］配合物。Ｘ射线单晶结构分析表明，该晶体属单斜晶系，空间群Ｐ２_１／ｃ，ａ＝１．３１４９（５）ｎｍ，ｂ＝１．８６６６（８）ｎｍ，ｃ＝１．８９０３（３）ｎｍ，β＝１０４．０６（３）°，Ｚ＝２．收集到独立衍射点３５０５个，其中１３８２个为可观测点，最终一致性因子Ｒ＝０．０７８．结构分析结果表明，菲醌与钼多酸根在不同的实验条件下，能形成配比、氧化态以及结构不同的配合物。     

高氯酸铒与甘氨酸和丙氨酸配合物的合成及其晶体结构

在水溶液中合成了高氯酸铒与甘氨酸和丙氨酸混配配合物［Ｅｒ＿２（Ｇｌｙ）＿４）（Ａｌａ）＿２（Ｈ＿２Ｏ）＿４］（ＣｌＯ＿４）＿６·３Ｈ＿２Ｏ，测定了其单晶结构。晶体属三斜晶系，Ｐ１空间群。晶胞参数为ａ＝１．１２８６（５）ｎｍ，ｂ＝１２４４ｂ（２）ｎｍ，ｃ＝０．９４２３（２）ｎｍ，ａ＝７７．６３（２）°，β＝７５２７（２）°，γ＝６４．４５（２）°，Ｖ＝１．１４６６（５）ｎｍ￣３Ｚ＝１，Ｄ＿ｃ＝２．１５４ｇ／ｃｍ￣３。该配合物为链状分子，甘氨酸和丙氨酸的羧基均以桥式与相邻的两个铒离子配位，铒的配位数为８，形成四方反棱柱型配位多面体。     

二价铕中性芳烃配合物［Eu（C_6Me_6）（AlCl_4）_2_4·Me_4

首次合成了二价铕中性芳烃配合物［Ｅｕ（Ｃ６Ｍｅ６（ＡｌＣｌ４）２］·Ｍｅ４Ｃ６Ｈ２，并经红外光谱，激发光谱和荧光光谱表征，测定了晶体结构。配合物属单斜晶系，Ｐ２／ｃ空间群，晶胞参数ａ＝１．７６５２（４）ｎｍ，ｂ＝１．５９１８（４）ｎｍ，ｃ＝１．８７５２（５）ｎｍ；β＝９７．６１（５）°，Ｚ＝２，Ｒ＝０．０４９６，Ｒｗ＝０．０４６２。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.